• 100HD unit is designed to handle up to (4) tail light bulbs - for Harley, Valkyrie, Magna and other cruiser models with grounded tail lamp housings.
• 100HD unit has a high-side interrupt circuit to allow flashing of the bright brake filaments. This makes it easy with a just a single wire splice.
• 100HD unit fits in the tail section or under the seat.
• When you apply the brakes the brake light will modulate fast at first then slow down to a solid on over a four second period.
• Our modulator will not affect the life of your bulb because it utilizes a soft-switching technology. Soft-switching is a technique which throttles the current flow through the bulb filament, so that there's no "thermal shock" - as opposed to a sudden in-rush of current, which can damage the bulb filament or shorten it's life considerably. This is far superior than maintaining a small voltage!
• The internal circuitry is being controlled by a microprocessor, which allows customizable features. The microprocessor can be programmed to adjust the intensity of the tailllight. Simply hold the brakes and turn the ignition on three times quickly. There are two selectable intesities "High" and "Low".
