Upcoming Rally: Myrtle Beach,SC May 15-20 Cali Bakers Firehouse (Next to Hooters) North Kings Hwy (17) Map

Audio Speakers For Can-Am Spyder RT

by J&M Corporation

J&M 40-ch CB Antenna Upgrade Kit for Can-Am Spyder RT

This is a complete J&M CB antenna upgrade kit for the Can-Am Spyder RT touring motorcycle.

Included in this kit is a replacement brass mounting block that has been machined to fit in the exact same spot as the factory antenna block, but with the correct sized and threaded mounting hole, to allow the industry standard CB antenna staffs to fit, and to properly conduct RF transmissions from the CB antenna coax, all the way thru to the antenna staff itself.

Many of the Can-Am factory installed CB antennas improperly insulate the antenna staff from the brass mounting block, causing high SWR and poor CB transmission capability from the Can-Am CB radio.

This new kit from J&M includes a pre-tuned, (no SWR tuning necessary) 3’, top-loaded CB antenna staff, replacement CB antenna brass mounting block and complete installation instructions.

You will be impressed with the instant improvement in your CB transmission distance and sound quality to other riders in your group.

Installation is a snap, with normal hand tools.

Fairing Speaker Upgrade Kit for Can-Am Spyder RT

Our wide fidelity fairing speaker upgrades for the Can-Am Spyder RT will allow the volume to be adjusted to maximum at highway speeds, without distortion.

They feature the same exact dimension mounting hole pattern and electrical spade lug size/polarity as the stock speakers, to make installation a snap.

Rated at 2 ohms impedance (2.8 ohms actual) and 140 watts max power, they feature a very thin, hard, injection molded polycarbonate cone, titanium colored dust cover, super flexible rolled edge, high sensitivity voice coil and high flux strength Neodymium magnet structure, to provide for maximum air movement, along with superior response.

You will be impressed by the significant improvement in volume and sound quality while riding your Spyder RT. Sold In Pairs.

Rear Speaker Upgrade Kit for Can-Am Spyder RT

Our wide fidelity rear speaker upgrades for the Can-Am Spyder RT will allow the volume to be adjusted to maximum at highway speeds, without distortion.

They feature the same exact dimension mounting hole pattern and electrical spade lug size/polarity as the stock rear speakers, to make installation a snap.

Rated at 3 ohms impedance (2.8 ohms actual) and 120 watts max power, they feature a very thin, hard, injection molded polycarbonate cone, titanium colored dust cover, super flexible rolled edge, high sensitivity voice coil and high flux strength Neodymium magnet structure, to provide for maximum air movement, along with superior response.

You will be impressed by the significant improvement in volume and sound quality while riding your Spyder RT. Sold In Pairs.