Motorcycle Lighting

Motorcycle Lights and Motorcycle Accessories

Motorcycle LED



New Website Coming May 2017

All CD Products

New CD Products

Gift Certificates

LED Accent Lights

LED Light Bars

LED Turn Signals

LED Taillights

License Plate

Motorcycle Headlamps    


Air Ride Remote

Harley Davidson

Can Am Spyder


Sport Bikes










Chrome Zip Ties & Other Installation Accessories


 Chrome Tie Wraps (Zip Ties)


These high quality chrome tie wraps (chrome zip ties) will come in handy to tidy up that new installation or clean up your existing wiring. A special chrome plating process keeps the chrome on and prevents flaking, even under stress. Sold in packages of 10 and 100.

2.5 x 150 mm Chrome Tie Wraps
(approximately 5.9")
Item: CTW10
Price: $4.99 (package of 10)
2.5 x 150 mm Chrome Tie Wraps
(approximately 5.9")
Item: CTW100
Price: $45.99 (package of 100)
3.6 x 200 mm Chrome Tie Wraps
(approximately 8")
Item: CTW8
Price: $6.50 (package of 10)

Stainless Steel Wire Loom Kit

This Stainless Steel Wire Loom is a must for any clean wiring job. This amazing tubular loom is actually flat and can be opened by pushing it together, once the wires are pulled through you simple pull the on the ends and this amazing loom collapses down around your wire providing a clean, sanitary installation. Works just like "Chinese Finger Traps".  Kit includes 6 feet of stainless steel wire loom and 2 pieces of gray shrink tubing.

Item: SSWL
Price: $9.95 (kit)

Stainless Steel Wire Loom Roll (100ft Roll)




2 Conductor 22 Gauge Stranded Cable

This is the same wire that comes standard on our LED Accent Lights (Step, Courtesy, and Hypers).  There are two individual 22 gauge stranded conductors; black and red. The wires are covered by a protective black sheath.  10' sections

Item: 10Cable
10 ft Piece
MSRP: $1.75

Cable (500ft Roll)

Item: CABLE500FT
MSRP: $49.95

  3M Adhesive Promoter 


3M Automotive Adhesion Promoter Ampule 
* This Product Can Only Be Shipped UPS Ground, you Must Select UPS Ground at checkout or the order will not be filled!
Price:$1.89/ Ampule

  3M Double Sided Tape

3M™ Automotive Acrylic Plus Attachment Tape, Black, 1/2 " wide
Price: $1.57 /ft

3M™ Automotive Acrylic Plus Attachment Tape, Black, 1/4 " wide
Item: 3MTAPE14
 Price: $0.79 /ft

Push Button Switch

Black Single Pole Push Button Switch
with Waterproof Boot
Item: SW02
Price: $3.00

ATC Mini Fuse Holder

Mini ATC Fuse Holder
with Waterproof Boot
Item: fuseholdermini
Price: $1.89

Mini ATC Fuse 3 Amp
Item: fuse
Price: $0.15

Adhesive Lined Heat Shrink Tubing

1/8" 3:1 Dual Wall Polyolefin Heat Shrink

This product is a cross linked polyolefin heat shrinkable tubing with an internal meltable sealant.  When heated the tubing will shrink to approximately 33% of its original diameter.  As it shrinks, the internal meltable sealant melts and physically encapsulates the covered item.  This tubing is especially of value for applications as a moisture barrier in high humidity and corrosive environments.  Other applications include:  strain relief, wire splices, breakouts, connections, solder joints, delicate wire terminations and end sealing of cables and tubing.

Shrink Ratio  3:1.  
Longitudinal Shrinkage  +1/-15%
Shrink Temperature 121 o C  (250 o F)
Specifications MIL-I-23053/4 class 3
Color Black
Length 48"
Continuous Operating Temperature -55 o C to 110 o C


Adhesive Lined Heat Shrink Tubing - 48"
Item: CD900
Price: $3.50


Loctite 242, .5ml Blue Medium Strength

Single Use Application

Removable Medium Strength

Item: 24205
Price $4.99

Cage Clamp® Connectors Details

Open the clamping point using one of the small orange colored levers so that the lever engages and keeps the clamping point in its opened position. 

The stripped wire can then be inserted into the clamping unit.  When this is accomplished, the lever should be returned to its closed position flush with the terminal block housing.  This reliably prevents accidental unclamping of a connected wire. 

Description: Terminal Block Wire Size (AWG):28-12; Body Material: Polyamide; Color: Gray; Connector Retention Style: Spring Clip; Contact Finish: Tin Over Copper; Contact Material: Stainless Steel; Current Rating:20A; Gender: Female RoHS Compliant: Yes


Cage Clamp® Connectors are included in all LED Accent Light Kits but can also be purchased individually below. You can insert up to 5 (24 gauge) wires per slot, therefore one 5 position connector will connect up to 24 LED Accent Lights together. You will need one connector for the positive wires and one for the negative wires.


Item #: CG01
5 Position Cage Clamp® Connector
Price $0.90 each
Item #: CG03
3 Position Cage Clamp® Connector
Price $0.75 each
Item #: CG02
2 Position Cage Clamp® Connector
Price $0.50 each

Cage Clamp® is a registered trademark of Wago®



Customer Service
M-TH 8:30am 5:30pm
Fri 9:30am 5:30pm
Closed Noon 1:00pm
15 Cypress Drive
Youngsville, NC 27596


Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon Sign up for our Monthly Email Newsletter



powered by BirdEye


All Content Copyright © 2003-2017 Custom Dynamics®