Dynamic Studz LED License Plate Bolts

LED License Plate Studz

Want to Get Noticed?

These new versatile LED License plate studz can be used as auxiliary running lights, turn signals, or attention getting brake lights. Simply replace your existing license plate bolts with these high quality LED Studz. The units come in sets of 2 or 4 with a choice of black or chrome housing and either Red or Amber LEDS. Each Studz has 4 high intensity LEDs that carry a Lifetime Warranty*. The LEDs can be wired to your existing tail light, brake light, or turn signal wiring. Our studz come with 36" of wire and connectors for a simple plug and play installation. For auxiliary brake light applications we offer two optional strobe/wig-wag modules. To see our Studz in Action, check out the movies below. Body is 1-5/8" x 13/16" X 1/2". Mounting studs are 1/4" x 3/4"

Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H
Sealed Weather Resistant heat sink case.

Wig Wag Module

User Selected Mode One: Emits 4 alternating quick flashes of the left and right brake lights, followed by 3 short flashes and 1 long flash (3.5 seconds) of both brakes lights. The 3 short flashes and 1 long flash pattern automatically repeats itself as long as the brakes are held.

User Selected Mode Two: Emits a visual signal of 4 alternating quick flashes of the left and right brake lights, followed by 3 short flashes of both brake lights and then the brake light remains steady until the brake is released.

Item: 01009
MSRP: ~~$39.95~~ Price: $35.95
Quantity

Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H
Sealed Weather Resistant heat sink case.

Strobe Module

This module can strobe LEDs at approximately 10 times per second or produce short 1 second interval flashes.

Four User Selected Modes

3 Flashes-Solid

3 Flashes-Solid-Repeat

3 Strobes-Solid-Repeat

3 Strobes-Solid

Item: 6104-00

Price: $45.00

"Dynamic Studz™"

LED License Plate Studz