Eclipze2® LED Turn Signals

(Patent Pending)

Most front motorcycle turn signals are dual intensity, they light up as a low intensity running light at approximately 30% of full brightness and when the turn signal is activated they flash from the running light intensity level (30%) to full brightness (100%).

Eclipze2® LEDs are designed to increase your frontal visibility in four ways. First, the running light intensity is changed from 30% of full brightness to 100% of full brightness making you motorcycle more visible all at times. Secondly, when a turn signal is activated the LEDs flash from 100% to 0% brightness giving more contrast as a turn signal, thus increasing your visibility when you are turning. Next, because Eclipze2® uses 48 high powered wide angle LEDs, they provide more light output than standard incandescent bulbs. Lastly, because LEDs illuminate 1/5 of a second faster than standard incandescent bulbs, this provides greater reaction time for other vehicles when your motorcycle is signaling for a turn, at 65mph this equates to 17 ft of reaction distance.

With Eclipze2® Patent Pending Technology; Eclipze2® LEDs retain all stock functionality. Eclipze2® LEDs work with emergency hazard flashers when the vehicle is off or on. Eclipze2® LEDs work with all alarm systems when the vehicle is off or on. In addition, our Patent Pending Eclipze2® technology provides a reduced voltage drop resulting in brighter LED output.

If you would like more information on Eclipze2™ LEDs please contact us at 1-800-382-1388.