|
ELFR-P FLASHER RELAY PLUG-AND-PLAY COMPATIBILITY LIST
NOTE: USA SPEC SHOWN, FOR NON-US SPEC VERIFY
INDIVIDUALLY
This list will determine if your motorcycle harness is known to be Plug-And-Play
with our ELFR-P Flasher Relay!
If your bike is not on the list, it may or may
not be plug-and-play, and it is most likely still compatible as a hard-wired
replacement
for your OEM flasher relay. See hard wire instructions below for
more information.
|
Yamaha |
Kawasaki |
Triumph |
KTM |
YZF-R1
YZF-R6
YZF600
FZ-6
FZ-8
FZ-1
FJR1300
MT-01
VMax
Super Tenere
TW200
Trailway
WR250R
XT250 |
ZX-10R
ZX-12R
'95-'11 ZX-6R(R)
'03-'09 Z-1000
ZXR1200 (1100)
ZZR1200
ZX1200
ZR-7
'05-'06 ZX636
ZX-6R
ZX-6RR
W650 (EJ650) |
'06-'08 Triumph Daytona 675 |
'09 KTM 690 R Enduro |
| Honda |
Suzuki |
Kymco |
General Compatibility Note |
07-current CBR-600RR
All Years-CBR-1000RR
RC-51
CBR600F4i
CB919
ST1300
GL1500
CBR1100XX
CBR900RR
CBR929RR
CBR600F2
CBR600F3
CBR600F4
VTR1000R Super Hawk
VT600
'02-'04 1800 C
'02-'03 1800 R models
'02-'03 1800 S models
'04-'05 1300 C models
'03-'05 1300 S models
'05 1300 R models
'88 Honda Hawk GT (NT650)
CB700SC (Nighthawk S)
'84 1200 Goldwing |
'96-'10 DR 650 |
XCiting 250
XCiting 500 |
Although we try to keep this Plug-And-Play list
current and complete, there are many more bikes out there that are
Plug-and-Play compatible, and hard wire compatible with our LED
Flasher Relay. We can not list them all! If your
motorcycle has a two wire flasher relay, our relay will work for
certain but may need to be hard wired into the harness. For
three wire flasher relays, if one of the three wires is merely a
ground wire, our relay will work but may need to be hard wired into
the harness. |
The Custom LED ELFR-P Plug-And-Play Programmable Electronic LED Flasher Relay
comes with detailed installation instructions,
mounting adhesive and a surface
prep alcohol pad, for the installation and operation of this product.
Installation of this product requires that you identify and remove the OEM
flasher relay motorcycle. If you are unfamiliar with the location of your OEM
flasher relay, or electronics in general, please consult a qualified technician
or your repair manual for additional information.
Click here for complete Installation of the ELFR-P.
|