Harley Davidson LED Turn Signals

By Custom Dynamics®

The Best LEDs On the Market Today Backed By the Best Warranty!

Lifetime Manufacture Warranty Against LED Failure!!!

Plug and Play - No Cutting, No Splicing; 48 Wide Angle Super Bright Next Generation Genesis LEDs per Cluster

Uses Existing Lens and Bucket; New Easier Install Bases

 H-D with Taillights Typically have 1157 on Front Turns and 1156 on Rear Turns

H-D without Taillights Typically have 1157 on Both Front and Rear Turns

European HDs Typically have 1156 Front and Rear Turns

Fits all H-D Motorcycles with Factory Incandescent Bulbs, choice between Bullet Style & Flat Style (Flat Style fits both newer Flat and older Classic Style Turn Signals)

American Bagger Tech Install

LED Color Options

Moon Shinez™ White LED Driving Lights/Turn Signals

Our Moon Shinez™ provide an exceptionally bright cool white driving light while still providing front turn signal functionality. At approximately 6000K these Genesis® II White LEDs with Eclipze2® Technology provide the same color as most HID kits and come with a Lifetime Warranty Against LED Failure. Our Moon Shinez™ must be used with a Clear or Smoked Lens (Sold Separately). Available in both bullet and flat styles.

Dynamic Ringz™ Driving Lights & Turn Signals

Our Dynamic Ringz™  are made with an outer ring of 24 white LEDs for an exceptionally bright cool white Driving Light .  The inner ring contains 24 amber LEDs for an exceptionally bright Amber Turn Signal.  Now here is the Dynamic part,  when a turn signal is activated the White LEDs turn completely off for the entire turn signal cycle providing greater visibility to the Amber turn signal!  At approximately 6000K these Genesis® II White LEDs will provide the same color as most HID kits and come with a Lifetime Warranty Against LED Failure. Our Dynamic Ringz™ must be used with a Clear or Smoked Lens (Sold Separately). Available in both bullet and flat styles.

FMCSA Standard No 108 #5 States " If optically combined with a turn signal lamp, is automatically deactivated as a DRL when the turn signal lamp or hazard warning lamp is activated, and automatically reactivated as a DRL when the turn signal lamp or hazard warning lamp is deactivated."

Dynamic Clusters™  are a multi-color LED Clusters used for rear turn signal applications. The clusters are 1.85" in diameter and contains 48 super bright LEDs. The outer ring contains Amber LEDs while all inner LEDs are dual intensity Red. The Amber LEDs are connected to a 1156 base while the dual intensity Red LEDs are connected to 3' wire pigtails. 

These clusters can be wired as: Red Low Intensity Running Light, Red High Intensity Brake Light, and Amber High Intensity Turn Signals, this allows your rear turn signals to be converted from simple turn signals to Dynamic running, brake, and turns signals, all in one unit!!! Installation is very simple, just plug the 1156 base to the stock turn signal housing receptacle, run the orange running light wire and the red brake light wires through the stock turn signal steams back to the taillight, connect the orange wire to the stock running light and the red wire to the stock brake light wire with the supplied posi-tap connectors.

Dynamic Clusters™ can be used with  Amber, Clear or Smoked Lenses, check out our lenses here. The Red LEDs are so powerful they will shine Red through most stock Amber lenses, however a more dynamic effect can be achieved with smoked or clear lenses.

Dynamic Clusters™ have a  Lifetime warranty against LED failure.

Dynamic Clusters™ are NOT Dot approved, for off road or show use only.

A load equalizer may be needed to slow down turn signal flash rate.

Installation Instructions Dynamic Clusters™

Front Harley Davidson LED Turn Signals