- H-D Bullet
Style Turn Signal LED Inserts
- Amber 1156/single intensity
A Load Equalizer may be needed
Item: GEN200-A-1156
Price:
$64.95 (pair)
|
-
- H-D Bullet
Style Turn Signal LED Inserts
- Amber
1157/ECLIPZE LED™
A Load Equalizer may be needed
Item: GEN200-A-1157E- Price:
$64.95 (pair)
|
|
H-D Bullet Style
Turn Signal LED Inserts
Item: GEN200-R-1156
Price:
$64.95 (pair)
|
- H-D Bullet Style
Turn Signal LED Inserts
- Red
1157/dual intensity
A Load Equalizer may be needed
Item: GEN200-R-1157- Price:
$64.95 (pair)
|
- H-D FLAT STYLE Turn Signal LED Inserts
- Amber 1156/single intensity
A Load Equalizer may be needed
Item: GEN200-A-1156-T- Price:
$64.95 (pair)
|
-
- H-D FLAT STYLE Turn Signal LED Inserts
- Amber
1157/ECLIPZE LED™
A Load Equalizer may be needed
Item: GEN200-A-1157E-T
Price:
$64.95 (pair)
|
- H-D FLAT STYLE Turn Signal LED Inserts
- Red
1156/single intensity
A Load Equalizer may be needed
Item: GEN200-R-1156-T
Price:
$64.95 (pair)
|
- H-D FLAT STYLE Turn Signal LED Inserts
- Red
1157/dual intensity
A Load Equalizer may be needed
Item: GEN200-R-1157-T
Price:
$64.95 (pair)
|
Complete Turn Signal Conversion Kits
- Kit Includes: 4 Genesis Plug and Play LED Turn Signal (1156 Rear, 1157 Front)
-
Choice of Red or Clear or Smoked Lens
-
Street Magic Signal Stabilizer
-
or
- Replace Signal Stabilizer with Badlands ILL-01A Run/Brake/Turn Controller to add running and brake functionality to your rear turn signals. Fits: H-D's FLH models 97 to present , Softail models from 96 to present except 04 and up Deuce Softails , Dyna models from 97 to present , XL models from 99 thru 03
-
|
Bullet Style: Complete HD Turn Signal Conversion Kit
Item: GEN200-KIT
Price: $199.95 Kit
|
|
Flat Style: Complete HD Turn Signal Conversion Kit
Item: GEN200-T-KIT
Price: $199.95 Kit
|
By Street Magic Cycle Product®
Dynamic Clusters™ are a multi-color LED Clusters used for rear turn signal applications. The clusters are 1.85" in diameter and contains 48 super bright LEDs. The outer ring contains Amber LEDS while all inner LEDs are dual intensity Red. The Amber LEDs are connected to a 1156 base while the dual intensity Red LEDs are connected to 3' wire pigtails.
These clusters can be wired as: Red low intensity Running light, Red High Intensity Brake Light, and Amber High Intensity Turn Signals, this allows your rear turn signals to be converted from simple turn signals to Dynamic running, brake, and turns signals, all in one unit!!! Installation is very simple, just plug the 1156 base to the stock turn signal housing receptacle, run the orange running light wire and the red brake light wires through the stock turn signal steams back to the taillight, connect the orange wire to the stock running light and the red wire to the stock brake light wire with the supplied posi-tap connectors.
Dynamic Clusters™ can be used with Amber, Clear or Smoked Lenses, check out our lenses here. The Red LEDs are so powerful they will shine Red though most stock Amber lenses, however a more dynamic effect can be achieved with smoked or clear lenses.
Dynamic Clusters™ have a Lifetime warranty against LED failure.
Dynamic Clusters™ are NOT Dot approved, for off road or show use only.
A load equalizer may be need to slow down turn signal flash rate.
|
Dynamic Cluster LED Turn Signals for HD Flat Style Turn Signals
Fits: Flat Style Turn Signals
Item: GEN200-AR-1156-T
Price: $81.00 pair
|
|
Dynamic Cluster LED Turn Signals for HD Bullet Style Turn Signals
Fits: Bullet Style Turn Signals
Item: GEN200-AR-1156
Price: $81.00 pair
|
