Hyper-Strips™ LED Accent Lights
Twice as Bright as Standard LEDs
-
Check Our Our New Sport Bike Hyper Kits - Click Here
-
LED Accent Lights: Hyper-Strips™
Hyper-Strips™ are part of the Street Magic™ family of LED Accent Lighting.
-
Hyper-Strips™ are the very latest in LED Accent Lighting Technology. These LED strips are completely flexible, they can be bent in any direction, twisted, or even tied in a knot. This means that you can mount them just about anywhere, no flat surface required. But the best part are the LEDs, these are no ordinary LEDs, these are high output "Military Grade" 5mm LEDs that emit light both forward and laterally producing some awesome lighting effects for your motorcycle.
-
- Hyper-Strip™ LEDs are available in 1.5", 3", and 12" lengths. Hyper-18 are used primarily for under tank lighting and are sold in a left/right pair. The Hyper-18 comes pre-wired with quick disconnect Amp connectors that allow you to easily remove your tank for service. Hyper-3 are used behind air cleaners, horns, and rails, while Hyper-6 can be used inside fenders to light up your wheels or under oil tanks or under saddle bags.
Hyper-Strips™
are PLUG and PLAY, No Cutting of Board, No Soldering, No Jumpers, 100% Waterproof.
Hyper-Strips™ come with 3M double sided tape factory applied, simply peel and stick.
Hyper-18 includes 2 12" Strips with 18 Super Bright LEDs per Strip,
36 LEDs in Total,
Quick Disconnect Connector and 36" Wire Pigtails
Hyper-3 is a 1.5" Strip with
3 Super Bright LEDs, 42" Wire Pigtail
Hyper-6 is a 3" Strip with
6 Super Bright LEDs, 42" Wire Pigtail
- Item # HYPER18
Includes:
- 2 - 12" Hyper-Strip™ LED with 18 LEDs per Strip and Quick Disconnect Y Connector
- (Select Color After Adding to Cart)
- Price: $69.95
|
Item # HYPER6
Includes:1 - 3" Hyper-Strip™ LED with 6 LEDs
(Select Color After Adding to Cart)
Price: $12.95
|
Item # HYPER3
Includes:1 - 1.5" Hyper-Strip™ LED with 3 LEDs
(Select Color After Adding to Cart)
Price: $8.95
|
- Item # HYPER18-5
Includes:
- 1 - 12" Hyper-Strip™ LED with 18 LEDs
- (Select Color After Adding to Cart)
- Price: $35.95
|
-
-
Cage Clamp® Connectors
- &
-
Crimp 'N Seal Waterproof Heat Shrinkable Connectors
Our New LeverLockz™
Installation Kit " Makes Installation as Simple as a Click™". Just strip the wire, lift the lever, insert the wire, and click into place. You can easily add or remove accent lights at any time. Other systems come pre-wired to fixed lengths using bulky connectors or jumpers, but by utilizing our 36" pre-leaded accent lights and the new Cage Clamps®
Connectors you can have a simple do it yourself
custom plug and play installation with no soldering, jumpers, or special tools. To lean more about the Cage Clamp® Connectors,
click here.
-
- Wheel Lightz™
-
 |
 |
|
|
Click to Enlarge |
-
-
Introducing
The worlds first specifically designed from the ground up
lighting product to be used for motorcycle wheel lighting effects.
Unlike competitors products, Wheel Lightz™
are not an "adaptation" or 'make due" product
trying to be used for wheel lighting.
Designed from the very beginning
to be used as a motorcycle wheel lighting product,
Wheel Lightz™ provide unparallel performance
combined with unmatched ease of installation.
Each proprietary Wheel Lightz™ case
contains 10 HIGH POWER LEDs
set at the exact angle to provide for unmatched
coverage and brightness, all in one easy to install unit.
Wheel Lightz™ comes pre-wired with 72 inch black sheath leads.
This extra length provides for unmatched ease of installation
for almost all standard applications.
-
- Wheel Lightz™ come in all standard Street Magic® colors, except Teal and are available in both chrome and black cases.
Wheel Lightz 10 LED Pod Dimensions" 2-5/8" x 3/8" x1-1/4"
MSRP: $16.95 each
- Fits: All H-Ds Brake Calipers (except: narrow glide front ends (sportsters, some dynas), and '06 and up V-Rods). Also Fits Any Metric where the back side of the brake caliper is flat and there is 5/8" clearance between the caliper and wheel.
-
Wheel Lightz 10 LED Pod ACCENT LIGHTS
Amber or
Red or
Ruby Red or
Orange or
Blue
or
Green or
White
or Jade: or
Purple*
Available in chrome or black
casing
- Wheel Lightz 10 LED Pod Light
- (Select Color After Adding to Cart)
- Item: CDLED10
- Price: $16.95 ea
|
Hyper-Strips™ Package Specials
Save More $$$ with Our Package Specials
Our Stage 1 Package includes the following:
1 Set Hyper18 with quick disconnects and 42" pigtail wires (36 LEDs)
4 Hyper3 with 36" pigtail wires (12 LEDS)
Complete LeverLockz™ Installation Kit
- 48 LEDs in Total
**********************
- Our Stage 2 includes everything in Stage 1:
-
- PLUS:
- 2 - Hyper6 Strips (12 LEDS)
- &
- 6 - 3 LED Pods (18 LEDS)
78 LEDS in Total
*********************
Add a Black Magic™ II Remote Control for
Just $79.95
-
Item: Stage1 LED Accent Kit
Includes:
- 1 Pair Hyper18
- 4 Hyper3
- Complete LeverLockz™ Installation Kit
- (Select Color After Adding to Cart)
- Price: $89.95
|
-
Item: Stage 2 LED Accent Kit
Includes:
- 1 Pair Hyper18
- 4 Hyper3
- 2 Hyper6
- 6 CDLED3 Pods
- Complete LeverLockz™ Installation Kit
- (Select Color After Adding to Cart)
Price: $179.95
|
|
Sport Bike Kits |
|
 |
- Price: $99.95
|
|
- Item: Sport Bike Level 2 LED Accent Kit
Includes: 10 Hyper6
- 4 Hyper3
- Complete LeverLockz™ Installation Kit
- (Select Color After Adding to Cart)
- Price: $149.95
|
** Lifetime Warranty is against LED Bulb Failure and does not cover failure due to improper installation or damage from abuse or misuse.
Accessories
Installation Kits
LeverLockz™ LED Hyper-Strip™ Installation Kit
Plug and Play Installation Kit - No Soldering Required, No Bulky Connectors
Contains everything needed for typically installation of 8-10 Hyper-Strips™
1 Weather Proof Push Button Switch with Boot
2 - 3M Adhesion Promoter-Sponge Applicator Packet
Weather proof fuse holder
3 Amp ATC fuse
1’ Black wire, 18 AWG
1' Red wire, 18 AWG
10 Tie wraps
2 Nylon insulated spade terminals
2 Cage Clamp® Connectors
2 Blue butt connector
This Kit is Included with All Hyper Packages
Item: Hyperinstall
Hyper-Light Installation Kit
Price:
$17.95
|
Wireless Remote Control Unit with Built-in Flasher
Six Function Wireless Remote:
On - Off - 4 Different Flash Speeds
Includes 2 Keychain Remote Control Units
|
This unit combines the functions of a full remote control unit and has 4 different flash rates as well as steady on to chose from. All with just a push of a button!
This units compact design allows it to be used on bikes no other remote unit alone could fit in. More or less trying to install an additional flasher unit in the same space!
This unit will allow you to turn on or off and control your LEDs flash rate from up to 100 feet away!
Unit allows your choice of 4
different flash rates from fast to slow as well as
steady on. All functions controlled with a push of a
button. Turn them on, or off or switch from steady
to any one of the 4 flash rates from inside your
house, the club, or even while walking down the
street! Unit hooks up with 4 simple wires and
comes with step by step instructions including
everything needed to install your Street Magic™
remote/flasher unit to your bike. Works with any 3
amp draw or less 12 volt accessory you want to
control.
|
2 Function On/Off Wireless Remote Control
Just Magic On/Off Wireless
Remote:
On-Off Function
Includes 1 Keychain remote Control Unit
This unit will allow you to turn your LEDs on or
off from up to 100 feet away!
Unit hooks up with 4 wires and come with step
by step instructions including everything needed to install your
Street Magic™ unit to your bike.
Works with any 3 amp draw or
less 12 volt accessory you want to control.
Black Magic™ II Remote Control
Street Magic™ Black Magic™ II Wireless Remote with Built in Strobe & Breathe
Includes 2 Keychain Remote Control Units, Built in Fuse,
and Quick Connectors
This hot new unit has it all, 3 built in strobes & 3 breathe functions, all with just a push of a button!
This unit will allow you to control your LEDs from up to 100 feet away!
Example of Functions:
1) Breathe - The remote control slowly decreases the LEDs from full brightness down to dim then slowly increases the LED intensity back to full brightness and then repeats. With this function the LEDs will appear to be "breathing". Black Magic™ II Remote Control Now has 3 Breathe patterns.
2) Strobe - By far the wildest strobe patterns on the market.
This remote control has 3 different strobe patterns that will definitely
make your vehicle stand out.
3) On/Off - simply turn your LEDs on and off up to 100ft away.
Unit hooks comes with step by step instructions including everything needed to install your Street Magic™ Black Magic™
II unit to your vehicle.
Installation Instructions
|
Black Magic™ II Remote Control
Item: BMREMOTE2
Price: $89.95
|
Magic™ Zone II Remote Control
(Click on Image for Larger picture)
Street Magic™ Magic™
Zone II Wireless Remote with 3 Zones, Built in Strobe, Breathe & Fader
Includes 2 Keychain Remote Control Units, Built in Fuse,
and Quick Connectors
1 Year Warranty
This unit has it all, control 3 zones, 3 strobe patterns, 3 breath speeds, strobe & breath, auto rotate zones, and more, all with just a push of a button!
This units compact design allows it to be used on bikes no other remote unit alone could fit in.
This unit will allow you to control your LEDs from up to 100 feet away!
Example of Functions:
1) Breathe - The remote control slowly decreases the LEDs from full brightness down to dim then slowly increases the LED intensity back to full brightness and then repeats. With this function the LEDs will appear to be "breathing". This units has 3 Breath Speeds, Each Zone or all zones can be made to breath.
2) Strobe - By far the wildest strobe patterns on the market. This remote control has 3 different strobe patterns that will definitely make your bike stand out. Each zone or all zones can be made to strobe.
3) Breath and Strobe: Any or all zone can be made to breath and strobe in any combination, ie 3 breath speeds x 3 strobe speeds
4) On/Off - simply turn your LEDs on and off up to 100ft away.
5) Zones - Turn on any or all Zones
6) Rotate Zones: Three different speeds of zone rotations. Lights will auto rotate between three zones and selected speed.
Unit hooks up with 4 simple wires and comes with step by step instructions including everything needed to install your Street Magic™ Magic™
Zone unit to your bike. Works with any 3 amp draw or less 12 volt accessory you want to control.
|
