Our Moon Shinez™ provide an exceptionally bright cool white driving light while still providing front turn signal functionality. At approximately 6000K these Genesis® II White LEDs with Eclipze2® Technology provide the same color as most HID kits and come with a Lifetime Warranty Against LED Failure.

Our Dynamic Ringz™  are made with an outer ring of 24 white LEDs for an exceptionally bright cool white Driving Light .  The inner ring contains 24 amber LEDs for an exceptionally bright Amber Turn Signal.  Now here is the Dynamic part,  when a turn signal is activated the White LEDs turn completely off for the entire turn signal cycle providing greater visibility to the Amber turn signal!  At approximately 6000K these Genesis® II White LEDs will provide the same color as most HID kits and come with a Lifetime Warranty Against LED Failure.

Dynamic Clusters™  are a multi-color LED Clusters used for rear turn signal applications. The clusters are 1.85" in diameter and contains 48 super bright LEDs. The outer ring contains Amber LEDs while all inner LEDs are dual intensity Red. The Amber LEDs are connected to a 1156 base while the dual intensity Red LEDs are connected to 3' wire pigtails. 

These clusters can be wired as: Red Low Intensity Running Light, Red High Intensity Brake Light, and Amber High Intensity Turn Signals, this allows your rear turn signals to be converted from simple turn signals to Dynamic running, brake, and turns signals, all in one unit!!! Installation is very simple, just plug the 1156 base to the stock turn signal housing receptacle, run the orange running light wire and the red brake light wires through the stock turn signal steams back to the taillight, connect the orange wire to the stock running light and the red wire to the stock brake light wire with the supplied posi-tap connectors.