Handlebar Control Swivel Mounts Only
This mounting kit allows installation of Small Silver Bullets under the controls of '88-'03 XL & '88-'09 FXR, Dyna, Road King, or Softail Models.
|
|
|
|
|
|
Küryakyn LED Silver Bullet Turn Signals
High Intensity Motorcycle LED Turn Signals
LED Silver Bullet Turn Signal All LED Silver Bullets include a load equalizer LED Kit have clear lenses, the color is emitted by the LED circuit board. Colored lenses are available but do not change the color emitted. Note: Silver Bullet lights are NOT DOT certified
Super Bright Small Silver Bullets The wiring exits the light through the mounting bolt.
Super Bright Silver Bullets
Super bright
L.E.D. deep dish reflector bulb style. Wiring exits the light through a hole in
the body behind the mounting boss. Note: Single function Deep Dish L.E.D. Style Silver Bullets have a single power wire & ground through their mount. Dual function Deep Dish L.E.D. Style Silver Bullets have
three wires. They cannot be used for run-brake applications because
Handlebar Control Swivel Mounts Only |
Item: 2375 MSRP: |
Small and Large Halogen Silver Bullets are intended to be installed as auxiliary driving lights. Small L.E.D. reflector style Silver Bullets are two-circuit and meant to be installed as running lights and turn signals.
Fits: H-D Models with 39mm Narrow Glide, 41mm Wide Glide (unshrouded), '06-'07 Dyna Models with 49mm forks
|
Small Halogen (pr) Item: 2304 |
License Plate Marker Light Mount
Mount auxiliary marker lights or turn signals to your license plate and open up that saddlebag area or just streamline your rear fender. This simple system mounts directly to the back of your license plate with support backing plate and two side mount brackets. The side mount brackets have a 3/8" hole and will accept Küryakyn Silver Bullets or L.E.D. Mini Bullets
|
LED Silver Bullet Mounting Adapters
P-Clamp Mount:
One slick little clamp, our chrome plated stainless steel Clamps has many uses. It works great for mounting Silver Bullets or other lights to frame tubes or engine guards. Its hinged design incorporates a flexible shim so it can be installed on more than one size tubing. Mounting is very secure because our clamp is secured to the tubing by both a flat head screw and the fastener used to attach the accessory.
Clamps have a 5/16" mounting hole.
Fits 2303 and 2319
 |
P-Clamps & 2 Piece Fork Clamps Clamp Calculator Step1: Take a piece of string and wrap it around fork or tubing to measure circumference (distance around outside) Step 2: Enter value for Fork Circumference as a decimal (4-1/2" = 4.5) Step 3: Hit Calculate Step 4: Match calculated Clamp Diameter to Clamp, select Clamp that matches or is slightly larger
|
 |
|
P-Clamps |
|
|
P Clamp-Chrome -
41mm Forks Item: 4017
MSRP: |
2 Piece Fork Mount-49mm
1 15/16" (1.93) Item: 2287 MSRP: |
|
P
Clamp-Chrome -
39mm Forks
Item: 4019
MSRP: |
2 Piece Fork Mount-41mm
1 5/8" (1.625) Item: 2286 MSRP: |
|
P Clamp-Chrome |
2 Piece Fork Mount-39mm
1 -3/8" - 1-1/2" (1.375 - 1.50) Item: 2285 MSRP: |
|
|
2 Piece Fork Mount for Inverted
Forks (pr)
54mm-58mm Note: Not compatible with H-D Installation Instructions Item: 2275 MSRP: |
|
P Clamp-Chrome
7/8" - 1" (0.875 - 1.0) Item: 4018 MSRP: |
|
|
P Clamp-Chrome
39mm/41mm Item: 4014 MSRP: |
|
|
LED Silver Bullet Accessories
Bullet Light Mounting Kit: for Metric Cruisers
Designed expressly for installing our Bullets on Metric Cruiser fender struts. This kit makes it easy! Specialized hollow mounting studs are 3/8"-16 on one end to thread into the light body and M8-1.25 on the other end to install in place of a fender strut mounting bolt on most metric cruisers.
M8-1.25 is very common on Honda, Kawasaki, Suzuki, and Yamaha fender struts, but you should confirm the suitability of this kit before ordering.
|
Adapter Studs
Our Adapter Studs have been designed as a universal kit to ease installation of our "hidden wire" Silver Bullet or Mini Bullet lights in custom applications. The studs are hollow and threaded 3/8"-16 on one end and 5/16"-24 on the other. They allow you to mount any of our Silver Bullets or Mini Bullet lights with 3/8" threaded mounting holes in a 5/16" hole. These will come in handy in just about all fender struts applications. The 5/16" diameter end is extra long and should be cut to length to ensure adequate clearance.
|
An inexpensive way to change the look of your L.E.D. Silver Bullets, replacement visors install in minutes. Our smoothly contoured visors can be used to compliment custom headlights or spotlights. We offer three versions of each size visor making it possible to outfit any Silver Bullet with the visor in any orientation you choose; top, bottom, inside, or outside. Sold in pairs, visors mount with existing hardware.
Replacement lenses for L.E.D. Silver Bullets fit inside standard and accent visors bezels.
|
|
Replacement Lenses for L.E.D. Silver Bullets
For a whole different look - replacement lenses for small L.E.D. Silver Bullets
fit inside Standard and Accent Visor Bezels.
Note: Changing lens color on L.E.D. Silver Bullets does not alter the color emitted!
|
|
|
