Metric
Highway Pegs
by
Küryakyn
ISO™-Stirrups with
Clevis and Magnum™
Quick Clamps
U.S. Patent # Des 411, 440; 338,643
This setup permits the use of the ISO-Stirrups on 1-1/4"
engine guards.
Note: All ISO-Stirrups include Chrome
Inserts
|
Small ISO-Peg with
ISO-Stirrup and 1-1/4"
Magnum Quick Clamp (pr)
Item:
8070
MSRP: $166.99 Price:
$150.29
|
|
Large ISO-Peg with
ISO-Stirrup and 1-1/4"
Magnum Quick Clamp (pr)
Item:
8071
MSRP: $166.99 Price:
$150.29
|
Switchblades with Clevis & Clamp
U.S. Patent # Des 411,440 and U.S. Patent # 6,893,038 &
Des. 506,707
|
Switchblades with Clevis
and 1-1/4" Magnum Quick Clamp (pr)
Item:
4443
MSRP: $189.99 Price:
$170.99
|
Adjustable Lockable Offsets
Reposition your passenger pegs to a comfortable desired location. With 360
degree lockable rotation and 2 or 4 inch arms gives you up to 8 full inches of
adjustability for your passenger's foot position. Add the required motorcycle
specific splined adapter and any Küryakyn style male mount footpeg and enjoy
your new comfort.
Note: Stock footpegs do not work with this product.
Requires Motorcycle specific Splined Adapter -
See Metric - Footpeg and Boards
page.
Not recommended for use on mounts fastened to the motorcycle with only a single
fastener. Leverage applied by the offset arm will cause the mount to twist &
loosen from the motorcycle.
Ergo
Engine Guard for VTX1300
You ask, we answer. Introducing the all-new Ergo Engine Guard for the VTX 1300.
Mimicking its’ predecessor, the Ergo Engine Guard for VTX 1800, this stylish
engine guard comes equipped with built-in dual-position highway pegs. Use the
pegs in the stock inner position or flipped out for an additional foot position
option.
|
Ergo Engine Guard for all
VTX1300 (set)
Fits: All VTX1300 Models
INSTALLATION INSTRUCTIONS
Item:
4587
MSRP: $339.99 Price:
$305.99
|
ISO™-SweptWing
Simple and stylish, add the sleek lines of the ISO-Sweptwing Peg to streamline
your bike and get ready for flight. With traditional ISO design, these beauties
reduce the vibration and add that super comfortable footpeg. Add them solo or
coordinate them as a matched set to Küryakyn's SwingWing Peg.
|
ISO-Sweptwing Peg (pr)
INSTALLATION INSTRUCTIONS
Item:
4463
MSRP: $79.99 Price:
$71.99
|
|
Replacement Rubber Pads
for ISO-Sweptwing (set)
Item:
4469
MSRP: $17.99 Price:
$16.19
|
Replacement Clevis for
Küryakyn Offsets
Fits: Küryakyn Conical Clevis Cruise Peg Applications,
Offsets, Longhorns and Right Angle Mounts
SwingWing Pegs
Enormous numbers of people have asked us how they can stretch
their legs a little without spending several hundred dollars for extended
controls. Here's the answer. . . a convenient fold-forward, comfortable cruise
peg that fastens in place of your stock peg and provides a secondary fold-out
peg 3" forward.
|
SwingWing Pegs (pr)
INSTALLATION INSTRUCTIONS
Item:
4466
MSRP: $169.99 Price:
$152.99
|
|
Replacement Rubber Pads
for Swingwing Pegs (set)
Item:
4468
MSRP: $20.99 Price:
$18.89
|
Zombie™ Pegs
Skulls are where it’s at! These skeletal pegs are sturdy and
rugged. An ominous skull is nestled between the rubber pads with a sinister
spire point filling the void. They look great by themselves or combined with our
Skull Air Cleaner or Skull Mirrors.
|
Zombie Pegs (pr)
INSTALLATION INSTRUCTIONS
Item:
4470
MSRP: $103.99 Price:
$93.59
|
|
Zombie Pegs Replacement
Rubber Pads (set)
Item:
4472
MSRP: $11.99 Price:
$10.79
|
Ergo Guard Light Mounting Brackets
With this simple bracket kit, you can easily install Küryakyn
Silver Bullets (or any other light using 5/16" mounting screw). The kit includes
two brackets and hardware to secure them to the existing holes beneath the foot
rest area. The Ergo Guard is already drilled to internally route the wiring for
a neat and clean appearance.
Recommended options for Silver bullets include P/N's 2303,
2319.
Note: If adding Silver Bullets to function as
driving lights, we highly recommend using our Wiring and Relay Kit, P/N
2328.
Note: 4585 Ergo Engine Guard for VTX 1800 is not
internally drilled for hiding wires when installing 2284 Ergo Guard Light
Mounting Brackets and Lights.
Cruise Peg Mounts for VTX1800C/F
Here's the perfect solution for adding cruise pegs to the
VTX1800C/F. This setup places the pegs in a comfortable "stretched out"
location, without adding bulky engine guards to this sleek machine. These super
clean mount plates simply bolt on to the existing forward controls for a sturdy,
comfortable setup that is also pleasing to the eye. Pegs
sold separately.
Cruise Peg Mounts for VTX
Floorboards
Add our highway pegs to your stock driver floorboards and you
have the best of both worlds. A comfy board and a cruise peg to stretch out the
kinks on a long ride. You won't believe the difference.
Accepts male mount pegs, sold separately.
|
Cruise Peg Mounts for
VTX1800 Retro (pr)
Fits: '02-'08 VTX1800R/S/N/T, '03-'09
VTX1300R/S/T Models, & '10 VT1300 Interstate
INSTALLATION INSTRUCTIONS
Item:
4540
MSRP: $155.99 Price:
$143.99
|
Cruise Peg Mounts for VTX1300
Add cruise pegs without sullying your VTX with bulky engine
guards. These super clean mount plates simply bolt on to the existing footboard
mounting bosses for a sturdy, comfortable stretched out setup that is also
pleasing to the eye. Pegs sold separately. The
Cruise Peg Mount will accept any male mount peg.
|
Cruise Peg Mounts for
VTX1300 (pr)
Fits :'03-'09 VTX1300 Retro/S/T and '04-'09
VTX1300C
INSTALLATION INSTRUCTIONS
Item:
4519
MSRP: $149.99 Price:
$134.99
|
Cruise
Pegs for Shadow 1100
You will really enjoy pounding out the miles with these classy highway pegs. A
must for long rides and more positions for your legs.
Accepts male mount pegs, sold separately.
|
Cruise Pegs for Shadow
1100 (pr)
Fits '99-'07 Shadow Sabre 1100 and Spirit
1100
INSTALLATION INSTRUCTIONS
Item:
4541
MSRP: $155.99 Price:
$140.39
|
Forward Control Highway
Pegs
It's a real challenge to mount a set of highway pegs on a forward control
equipped bike. We've done it at last with this very adjustable set-up. Fastening
between the forward control and the Footpeg. It accepts any Küryakyn Footpeg in
the primary location and any male mount Footpeg in the cruise location.
Note:
Primary foot position only accepts the following Küryakyn
Pegs: Stiletto, Switchblade, Dually, Large ISO, Small ISO,
Retro, Pilot and ISO-Wing. Forward position accepts any male
mount peg.
Additional Note for Metric fitment: Original foot position
only accepts the following Küryakyn Pegs: Stiletto (P/N
4476) Switchblade (P/N
4446), Dually (P/N
7963), Large ISO (P/N
7965), Small ISO (P/N
7964), Retro (P/N
4401), Pilot (P/N
4419), ISO-Wing (P/N
4452), Sweptwing (P/N
4464), Flamin' (P/N
4417). Stock OEM pegs will not work with this product.
Cruise Mounts include Küryakyn male mount style adapter for
aftermarket cruise peg applications only.
Cruise Pegs
for Yamaha
U.S. Patent #Des.405,393 and 411.440
This clamp-on highway peg combination works great on Yamaha's V-Stars and Road
Stars including the Road Star Warrior. Utilizing our easily installed 1-1/4"
Magnum Quick Clamps and X-Tension Peg Mounts, the peg location can be altered to
suit most anyone's taste. Supplied with our ever popular and durable Dually
ISO-Peg, you can look forward to many years of power cruising and touring in
style and comfort.
Fits: All ‘99-’10 Road Star 1600/1700, ‘02-’09 Road Star
Warrior,‘06-’10 Roadliner/Stratoliner, ‘99-’09 V Star 1100, '09-'10 V Star 950,
All V Star 650, ‘08-'10 Raider (Requires 1-1/4” of available round space on both
front frame tubes)
Note: Not suggested for use with full size engine
guards.
|
X-Tension with Dually and
1-1/4" Magnum Quick Clamp (pr)
Item:
4501
MSRP: $189.99 Price:
$170.99
|
Adjustable Cruise
Peg Mounts for
Yamaha
Floorboards
Add the comfort of cruise pegs and keep that clean simple
style with these adjustable cruise peg mounts. These little beauties bolt
directly onto your Road Star or V-Star floorboards and allow full adjustability
for optional foot positions. Add any of Küryakyn's male mount footpegs and ride
on.
Note: Footpegs shown, but not included.
Male Mount Pegs Sold Separately
|
Adjustable Cruise Peg
Mounts for Yamaha Floorboards (pr)
Fits: Road Star and V Star 950, 1100 & 1300
Models with stock Floorboards.
INSTALLATION INSTRUCTIONS
Item:
4549
MSRP: $169.99 Price:
$152.99
|
|
Adjustable Cruise Peg
Mounts (pr)
Fits: Kawasaki: All
Vulcan 1600/2000 Models, All '09-'10 Vulcan 1700 Models & 1700
Voyager Models & all Vulcan 900 Classic with stock floorboards
(pr)
Item:
4579
MSRP: $176.99 Price:
$159.29
|
Ergo™
with Dually ISO™-Pegs
U.S. Patent # Des 405,393
This is the premier cruise peg system available today. Ergonomically
designed for maximum driver comfort, these mounts make possible an unbelievable
range of adjustment for the tall, short or in between rider.
The articulated mounting bracket is made of highly polished stainless steel for
extreme strength, great looks and simple installation.
The 6" long chrome swing arm, has an ingenious locking mechanism, canted at a 6
degree angle which angles the pegs just the right amount for ideal comfort.
|
Ergo with Dually ISO-Pegs
(pr)
Fits '98-'00 GL1500 and all Valkyrie (ex.
Interstate or Rune.)
(Due to the configuration of the engine
guards, less adjustment is available on the Valkyrie models.)
INSTALLATION INSTRUCTIONS
Item:
4050
MSRP: $199.99 Price:
$179.99
|
Ergo™ with
ISO™-Wings
This is the premier cruise peg system available today. Ergonomically
designed for maximum driver comfort, these mounts make possible an unbelievable
range of adjustment for the tall, short or in between rider.
The articulated mounting bracket is made of highly polished stainless steel for
extreme strength, great looks and simple installation.
The 6" long chrome swing arm, has an ingenious locking mechanism, canted at a 6
degree angle which angles the pegs just the right amount for ideal comfort.
|
Ergo with ISO-Wings (pr)
Fits '98-'00 GL1500 and all Valkyrie (ex.
Interstate and Rune.)
(Due to the configuration of the engine
guards, less adjustment is available on the Valkyrie models.)
INSTALLATION INSTRUCTIONS
Item:
4052
MSRP: $218.99 Price:
$197.09
|
Ergo™ with
Lighted and Un-lighted
Cruise
Boards (pr)
Patent Pending
This is the premier cruise peg system available today. Ergonomically designed
for maximum driver comfort, these mounts make possible an unbelievable range of
adjustment for the tall, short or in between rider.
The articulated mounting bracket is made of highly polished stainless steel for
extreme strength, great looks and simple installation.
The 6" long chrome swing arm, has an ingenious locking mechanism, canted at a 6
degree angle which angles the pegs just the right amount for ideal comfort.
|
Ergo Tour with Lighted
Cruise Boards (pr)
Fits '98-'00 GL1500 and all Valkyrie (ex.
Interstate and Rune.)
(Due to the configuration of the engine
guards, less adjustment is available on the Valkyrie models.)
INSTALLATION INSTRUCTIONS
Item:
4040
MSRP: $289.99 Price:
$260.99
|
|
Ergo with Un-lighted
Cruise Boards (pr)
Fits '98-'00 GL1500 and all Valkyrie (ex.
Interstate and Rune.)
(Due to the configuration of the engine
guards, less adjustment is available on the Valkyrie models.)
INSTALLATION INSTRUCTIONS
Item:
4041
MSRP: $270.99 Price:
$243.89
|
Küryakyn
Footpegs with Clevis and
Magnum™
Quick Clamps
U.S. Pat # Des 411,440
This is our most popular style of highway pegs. Using our patented Magnum Quick
Clamp, they are a snap to install and provide long-haul comfort. There are
several styles of footpegs to choose from with various size clamps to
accommodate most common engine guard diameters.
These can be installed on any round tubing (frames or engine guards), but it is
important to keep in mind that the footpeg itself will end up perpendicular to
the bar to which it is mounted. If your engine guard is angled in such a way so
that the peg will not be level once installed, check out our right angle mounts
or P/N 8008A.
Helpful Hint: If you are unsure of the diameter of
the tubing on which you'd like to install the highway pegs and don't have a dial
at your disposal, here is an easy way to figure it out. You'll need a piece of
heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and
ruler to make to marks on the edge of the paper 1" apart. Take the scissors and
cut lines perpendicular to the edge of the paper at the marks you just made.
Fold the resulting flap of paper out of the way. Next, take the piece of paper
to the bike and check to see if the tubing will slip into the opening you've
made in the edge of the paper. If the opening is too small, repeat the procedure
enlarging the opening to 1-1/8", 1-1/4", 1.35", 1-1/2" until you find one that
will fit.
|
Pilot Pegs with 1-1/4"
Diameter Clamps (pr)
U.S.
Patent # Des. 411,440
INSTALLATION INSTRUCTIONS
Item:
4435
MSRP: $129.99 Price:
$116.99
|
|
Dually ISO-Pegs with 1"
Diameter Clamps (pr)
Item:
4510
MSRP: $135.99 Price:
$122.39
|
|
Dually ISO-Pegs with
1-1/4" Diameter Clamps (pr)
U.S. Patent #
Des 411,440 and 405,393
Item:
7992
MSRP: $135.99 Price:
$122.39
|
|
Small ISO-Pegs with 1"
Diameter Clamps (pr)
Item:
8030
MSRP: $99.99 Price:
$89.99
|
|
Large ISO-Pegs with 1"
Diameter Clamps (pr)
Item:
8031
MSRP: $103.99 Price:
$93.59
|
|
Small ISO-Pegs with 1-1/4"
Diameter Clamps (pr)
Item:
8032
MSRP: $99.99 Price:
$89.99
|
|
Large ISO-Pegs with 1-1/4"
Diameter Clamps (pr)
Item:
8033
MSRP: $103.99 Price:
$93.59
|
Footpegs with
Offset Mounts and
Magnum™
Quick Clamps
U.S. Pat # Des 411,440
These highway pegs utilize our unique offset mount to allow riders a range of
adjustment not possible with other clamp-on style highway pegs. The offset can
be rotated 360 degrees in a 4-inch diameter circle to accommodate tall, short,
or average height riders.
These can be installed on any round tubing (frames or engine guards), but it is
important to keep in mind that the footpeg itself will end up perpendicular to
the bar to which it is mounted. If your engine guard is angled in such a way so
that the peg will not be level once installed, look at our Right Angle Mounts
and male adapters with adjustable stop.
Helpful Hint: If you are unsure of the diameter of
the tubing on which you'd like to install the highway pegs and don't have a dial
at your disposal, here is an easy way to figure it out. You'll need a piece of
heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and
ruler to make to marks on the edge of the paper 1" apart. Take the scissors and
cut lines perpendicular to the edge of the paper at the marks you just made.
Fold the resulting flap of paper out of the way. Next, take the piece of paper
to the bike and check to see if the tubing will slip into the opening you've
made in the edge of the paper. If the opening is too small, repeat the procedure
enlarging the opening to 1-1/8", 1-1/4", 1.35", and 1-1/2" until you find one
that will fit.
Helpful Quick Clamp Size Selection Information
| Baron Standard Engine
Guards |
1-1/4" |
| Cobra Standard Engine
|
1-1/4" |
| Cobra Fatty Engine Guards |
1-1/2" |
| Kawasaki & Honda VT1300 Custom
Line Front Frame Down Tubes |
1.35" |
| Valkyrie Curved Part of Engine
Guard |
1-1/8" |
| Yamaha Front Frame Down Tubes, All
Road Star, V-Star, Roadliner, Stratoliner & Raider |
1-1/4" |
| Yamaha Full Size/Full Loop Engine
Guards |
1-1/4" |
| Honda Full Size/Full Loop Engine
Guards |
1-1/4" |
| Victory Front Frame Down Tubes on
'06 & Up Hammer, Kingpin, Jackpot & 8 Ball |
1-1/2" |
|
Dually ISO-Pegs with
Offset Mounts and 1.35" Clamps (pr)
U.S.
Patent #Des.405,393 and 411.440
Note: Works great on Kawasaki front frame tubes
Item:
7920
MSRP: $139.99 Price:
$125.99
|
|
Large ISO-Pegs with 1.35"
diameter clamps (pr)
Note: Works great on Kawasaki front frame tubes
Item:
7933
MSRP: $124.99 Price:
$112.49
|
|
Dually ISO-Peg with Offset
Mounts and 1-1/8" Magnum
Quick Clamp (pr)
U.S.
Patent #Des.405,393 and 411.440
Item:
7966
MSRP: $145.99 Price:
$131.39
|
|
Dually ISO-Pegs with 1"
Diameter Clamps (pr)
U.S.
Patent #Des.405,393 and 411.440
Item:
7976
MSRP: $145.99 Price:
$131.39
|
|
Offset Mounts with 1-1/4"
Magnum Quick Clamp
and Dually ISO-Pegs (pr)
U.S.
Patent #Des.405,393 and 411.440
INSTALLATION INSTRUCTIONS
Item:
7993
MSRP: $145.99 Price:
$131.39
|
|
Offset Mounts with 1-1/4"
Magnum Quick Clamp
and Small ISO-Pegs (pr)
INSTALLATION INSTRUCTIONS
Item:
7998
MSRP: $124.99 Price:
$112.49
|
|
Offset Mounts with 1-1/4"
Magnum Quick Clamp
and Large ISO-Peg (pr)
INSTALLATION INSTRUCTIONS
Item:
7999
MSRP: $135.99 Price:
$122.39
|
Küryakyn Footpegs with Right Angle Mounts
and Magnum™ Quick Clamps
U.S. Patent #Des. 411.440
This mount is the answer for motorcycles with an engine guard that does not
allow the installation of a traditional style highway peg. Most highway pegs
position the peg perpendicular to tubing to which they are mounted, thereby
limiting their use to engine guards that run vertically. The Right Angle Mount
overcomes this limitation and will allow you to position the peg horizontally
regardless of the orientation of the engine guard.
|
Long Right Angle Mount
with 1 Diameter Clamps
and Small ISO-Pegs (pr)
Item:
4507
MSRP: $129.99 Price:
$116.99
|
|
Long Right Angle Mount
with Dually ISO-Pegs and 1" Clamps (pr)
U.S.
Patent # Des. 405,393 and 411,440
Item:
4509
MSRP: $139.99 Price:
$125.99
|
|
Short Right Angle Mount
with 1.25" Diameter Clamps
and Dually ISO-Pegs (pr)
U.S.
Patent # Des. 405,393
Item:
4514
MSRP: $139.99 Price:
$125.99
|
|
Short Right Angle Mount
with 1.25" Diameter Clamps
and Small ISO-Pegs (pr)
Item:
4517
MSRP: $129.99 Price:
$116.99
|
Male Mount
ISO™-Pegs
In addition to our peg and adapter system to replace stock
pegs on metric cruisers, we offer all the same style pegs in a male mount
version with the industry standard, H-D style male end. These pegs are
compatible with all Küryakyn cruise peg mounts and can also be used with all the
peg mounts listed in the Highway Pegs pages if you are combining components to
"build-your-own" highway pegs.
Note: These pegs will NOT replace the stock peg on
any metric cruiser.
|
Retro Peg with Male Mounts
(pr)
Item:
4400
MSRP: $72.99 Price:
$65.69
|
|
Pilot Pegs (pr)
INSTALLATION INSTRUCTIONS
Item:
4425
MSRP: $72.99 Price:
$65.69
|
|
Mini Pilot Pegs (pr)
INSTALLATION INSTRUCTIONS
Item:
4430
MSRP: $39.99 Price:
$35.99
|
|
Switchblade Pegs (pr)
INSTALLATION INSTRUCTIONS
Item:
4445
MSRP: $135.99 Price:
$122.39
|
|
Male Mount ISO-Wing (pr)
Item:
4450
MSRP: $103.99 Price:
$93.59
|
|
Kaiser Pegs, Male Mount
(pr)
INSTALLATION INSTRUCTIONS
Item:
4460
MSRP: $103.99 Price:
$93.59
|
|
Stiletto Pegs, Male Mount
(pr)
INSTALLATION INSTRUCTIONS
Item:
4475
MSRP: $103.99 Price:
$93.59
|
|
Small Male Mount ISO-Peg
(pr)
Includes Chrome Mounting Hardware.
INSTALLATION INSTRUCTIONS
Item:
8000
MSRP: $46.99 Price:
$42.29
|
|
Large Male Mount ISO-Peg
(pr)
Includes Chrome Mounting Hardware
INSTALLATION INSTRUCTIONS
Item:
8002
MSRP: $48.99 Price:
$44.09
|
|
Longhorn Small Peg (pr)
Includes Chrome Mounting Hardware
Item:
8024
MSRP: $51.99 Price:
$46.79
|
|
Large Peg with 1" ext.
(pr)
Item:
8025
MSRP: $51.99 Price:
$46.79
|
|
Dually Male Mount ISO-Peg
(pr)
U.S. Patent
#Des 405,393
INSTALLATION INSTRUCTIONS
Item:
8028
MSRP: $72.99 Price:
$65.69
|
Pilot™ Pegs with Clevis and Clamps
U.S. Pat# Des.411,440
This is our most popular style of highway pegs. Using our patented Magnum Quick
Clamp, they are a snap to install and provide long-haul comfort. There are
several styles of footpegs to choose from with various size clamps to
accommodate most common engine guard diameters.
These can be installed on any round tubing (frames or engine guards), but it is
important to keep in mind that the footpeg itself will end up perpendicular to
the bar to which it is mounted. If your engine guard is angled in such a way so
that the peg will not be level once installed, look at our right angle mounts.
Helpful Hint: If you are unsure of the diameter of
the tubing on which you'd like to install the highway pegs and don't have a dial
at your disposal, here is an easy way to figure it out. You'll need a piece of
heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and
ruler to make to marks on the edge of the paper 1" apart. Take the scissors and
cut lines perpendicular to the edge of the paper at the marks you just made.
Fold the resulting flap of paper out of the way. Next, take the piece of paper
to the bike and check to see if the tubing will slip into the opening you've
made in the edge of the paper. If the opening is too small, repeat the procedure
enlarging the opening to 1-1/8", 1-1/4", 1.35", and 1-1/2" until you find one
that will fit.
|
Pilot Pegs with 1-1/4"
Diameter Clamps (pr)
U.S. Patent #
Des. 411,440
INSTALLATION INSTRUCTIONS
Item:
4435
MSRP: $129.99 Price:
$116.99
|
Offset Pegs with Quick Clamps
U.S. Patent # Des 405,393 and 411,440
This innovative cruise peg setup redefines the term long haul comfort.
Regardless of one's height, this system is adjustable enough to accommodate
nearly any rider. Fits GL1500, Valkyrie (except Interstate), and almost any bike
with 1-inch engine guards.
|
Dually ISO-Pegs with 1"
Diameter Clamps (pr)
U.S.
Patent #Des.405,393 and 411.440
Item:
7976
MSRP: $145.99 Price:
$131.39
|
Pilot™
Pegs with Offset Mounts and
Magnum™ Quick Clamps (pr)
These highway pegs utilize our unique offset mount to allow riders a range of
adjustment not possible with other clamp-on style highway pegs. The offset can
be rotated 360 degrees in a 4" diameter circle to accommodate tall, short, or
average height riders. These can be installed on any round tubing (frames or
engine guards), but it is important to keep in mind that the Footpeg itself will
end up perpendicular to the bar to which it is mounted. If your engine guard is
angled in such a way so that the peg will not be level once installed, look at
our right angle mounts and male adapters with adjustable stop.
Helpful Hint: If you are unsure of the diameter of
the tubing on which you'd like to install the highway pegs and don't have a dial
at your disposal, here is an easy way to figure it out. You'll need a piece of
heavy paper or cardboard, a ruler, a pencil, and a scissors. Use the pencil and
ruler to make to marks on the edge of the paper 1" apart. Take the scissors and
cut lines perpendicular to the edge of the paper at the marks you just made.
Fold the resulting flap of paper out of the way. Next, take the piece of paper
to the bike and check to see if the tubing will slip into the opening you've
made in the edge of the paper. If the opening is too small, repeat the procedure
enlarging the opening to 1-1/8", 1-1/4", 1.35", 1-1/2" until you find one that
will fit.
Longhorn Offset Dually Highway
Pegs
U.S. Patent # Des 405,393 and 411,440
The all-in-one answer for long-haul comfort. We combined our most popular
highway peg components into one product that’s attractive, adjustable and easy
to install.
|
Longhorn Offset Dually
with 1-1/2" Magnum Quick Clamp (pr)
Note: Not
compatible with GoldWing
INSTALLATION INSTRUCTIONS
Item:
4574
MSRP: $159.99 Price:
$143.99
|
|
Longhorn Offset Dually
ISO-Pegs with 1-1/4" Magnum Quick Clamp (pr)
Fits 1-1/4" Engine Guards
Note: Not compatible with
GoldWing
Item:
4575
MSRP: $159.99 Price:
$143.99
|
|
Longhorn Offset Dually
ISO-Pegs with 1" Magnum Quick Clamp (pr)
INSTALLATION INSTRUCTIONS
Item:
7980
MSRP: $159.99 Price:
$143.99
|
|
Longhorn Offset SweptWing
with 1-1/4" Magnum Quick Clamps (pr)
Item:
4616
MSRP: $159.99 Price:
$143.99
|
Magnum™ Quick
Clamps
U.S. Patent # Des. 411,440
We've made a lot of friends with these! Stainless steel construction for
superior strength and hinged design for fast simple installation. No more
stripped bolt heads!
Note:
Cobra engine guards are 1-1/4" diameter.
Frame down tubes on VN1500 and some other Metric cruisers are 1.35"
diameter.
The curved part of a Valkyrie® engine guard in front of the valve covers
will accept a 1-1/8" clamp.
Most Victory frame tubes are 1-1/4" diameter.
Helpful Hint:
If you are unsure of the diameter of the tubing on which you'd like to install
the highway pegs and don't have a dial caliper at your disposal, here is an easy
way to figure it out. You'll need a piece of heavy paper or cardboard, a ruler,
a pencil, and a scissors. Use the pencil and ruler to make to marks on the edge
of the paper 1" apart. Take the scissors and cut lines perpendicular to the edge
of the paper at the marks you just made. Fold the resulting flap of paper out of
the way. Next, take the piece of paper to the bike and check to see if the
tubing will slip into the opening you've made in the edge of the paper. If the
opening is too small, repeat the procedure enlarging the opening to 1-1/8",
1-1/4", 1.35", and 1-1/2" until you find one that will fit.
|
1-1/4" I.D. Magnum Quick
Clamp (pr)
Fits H-D engine guards.
INSTALLATION INSTRUCTIONS
Item:
1000
MSRP: $42.99 Price:
$38.69
|
|
1-1/2" I.D. Magnum Quick
Clamp (pr)
Fits Boss Hoss.
INSTALLATION INSTRUCTIONS
Item:
1001
MSRP: $42.99 Price:
$38.69
|
|
1" I.D. Magnum Quick Clamp
(pr)
Fits some aftermarket engine guards
INSTALLATION INSTRUCTIONS
Item:
1002
MSRP: $42.99 Price:
$38.69
|
|
1" I.D. Magnum Quick Clamp
(ea)
Fits some aftermarket engine guards.
INSTALLATION INSTRUCTIONS
Item:
7940
MSRP: $23.99 Price:
$21.59
|
|
1-1/8" I.D. Magnum Quick
Clamp (ea)
Fits H-D Frame Down-Tubes.
INSTALLATION INSTRUCTIONS
Item:
7941
MSRP: $23.99 Price:
$21.59
|
|
1.35" I.D. Magnum Quick
Clamp (ea)
Fits Japanese Cruiser Frame Down-Tubes.
INSTALLATION INSTRUCTIONS
Item:
7942
MSRP: $23.99 Price:
$21.59
|
|
1-1/4" I.D. Magnum Quick
Clamp (ea)
Fits H-D engine guards.
INSTALLATION INSTRUCTIONS
Item:
8073
MSRP: $23.99 Price:
$21.59
|
Universal Cruise Peg Mounts
U.S. Patent # Des. 411,440
Although we can't understand why anyone wouldn't want to use our pegs, this
setup will allow the use of any H-D style male mount pegs with our innovative
Magnum Quick Clamps and Clevises for engine guard applications.
|
1-1/2" Magnum Quick Clamp
with Clevis (pr)
INSTALLATION INSTRUCTIONS
Item:
4573
MSRP: $72.99 Price:
$65.69
|
|
1-1/4" Magnum Quick Clamp
with Clevis (pr)
For 1-1/4" Engine Guards
Item:
7944
MSRP: $72.99 Price:
$65.69
|
Footpeg Mounts and Mounting
Clevises
All footpeg mounting clevises and footpeg mounts listed
perform the same function. Your decision will boil down to the length required
and the style you prefer.
|
Offset Peg Mounts 1/2"-13
thread (pr)
INSTALLATION INSTRUCTIONS
Item:
7996
MSRP: $51.99 Price:
$46.79
|
|
Standard Peg Mount with 1/2" -20
thread (pr)
Item:
8015
MSRP: $19.99 Price:
$17.99
|
|
Short Magnum Peg Mount
with 1/2" -13 thread (pr)
Item:
8061
MSRP: $31.99 Price: $28.79
|
|
3-1/2" long Peg Mount
3/8" -16
thread (pr)
Item:
8087
MSRP: $39.99 Price:
$35.99
|
|
3-1/2" long Peg Mount 1/2" -13
thread (pr)
Item:
8088
MSRP: $39.99 Price:
$35.99
|
Right Angle
Mounts
The Right Angle Footpeg Mount is our contortionist. Most other
mounts position the peg perpendicular to the tubing it is mounted. Our right
angle mounts allow lots of flexibility in peg placements because they can be
adjusted along two axes. Two lengths are available to cover many applications.
This is the only setup we know of that permits cruise peg installation on engine
guards that slope inward, outward or diagonally.
Note: Requires Magnum Quick
Clamps for Mounting
Longhorn
Offset Peg Mount
The stylish new peg mount provides 360 degrees adjustability
so it can be used to position the peg closer to the rider or further away. It's
3-1/4" arm gives an incredible 6-1/2" range of adjustment. Incorporating an
innovative locking device this mount is guaranteed not to slip.
For use with Magnum Quick Clamps only.
|
Longhorn Offset Peg Mounts
with 1" Clamps (pr)
U.S.
Patent # Des. 411,440
Item:
7985
MSRP: $114.99 Price:
$103.49
|
|
Longhorn Offset Peg Mounts
with 1-1/4" Clamps (pr)
U.S.
Patent # Des. 411,440
Item:
7986
MSRP: $114.99 Price:
$103.49
|
|
Longhorn Offset Peg Mounts
(pr)
INSTALLATION INSTRUCTIONS
Item:
8016
MSRP: $72.99 Price:
$65.69
|
|
Longhorn Offset with 1-1/2
inch clamp (pr)
U.S. Patent # Des.
411,440
Item:
4577
MSRP: $117.99 Price:
$106.19
|
Switchblade™
Pegs
U.S. Patent # 6,983,038 & Des 506,707
In addition to our peg and adapter system to replace stock pegs on metric
cruisers, we offer all the same style pegs in a male mount version with the
industry standard, H-D style male end. These pegs are compatible with all
Küryakyn cruise peg mounts and can also be used with all the peg mounts listed
in the Highway Pegs pages if you are combining components to "build-your'own"
highway pegs.
Note: These pegs will NOT replace the stock peg on
any metric cruiser.
|
Switchblade Pegs (pr)
INSTALLATION INSTRUCTIONS
Item:
4445
MSRP: $135.99 Price:
$122.39
|
|
Switchblade Pegs without
Ends (pr)
INSTALLATION INSTRUCTIONS
Item:
4446
MSRP: $124.99 Price:
$112.49
|
|
Switchblade Replacement
"Curb Feelers" (pr)
Item:
4447
MSRP: $10.99 Price:
$9.89
|
|
Switchblade Replacement
Rubber Pads (10 Pieces)
Item:
4448
MSRP: $18.99 Price:
$17.09
|
X-Tension
Measuring 4-1/2" long with a 1-1/4" offset, the rider may now
slightly increase or decrease the reach to the cruise pegs. Work great with our
Magnum Quick Clamps or they can be used in custom applications. Choose from one
of our great male mount peg options. Works great on Yamaha V-Stars or Road Stars
with 1-1/4" clamps and your choice of pegs.
Note:
Requires Male Mount Pegs. Not suggested for use with full
size engine guards.
|
X-Tension with Dually and
1-1/4" Magnum Quick Clamp (pr)
Fits: All
‘99-’10 Road Star 1600/1700, ‘02-’09 Road Star Warrior,‘06-’10
Roadliner/Stratoliner, ‘99-’09 V Star 1100, '09-'10 V Star 950,
All V Star 650, ‘08-'10 Raider (Requires 1-1/4” of available
round space on both front frame tubes)
Item:
4501
MSRP: $189.99 Price:
$170.99
|
|
X-Tension (pr)
Yamaha V Star 1100/650, Road
Stars with 1-1/4" clamps or with our Magnum Quick Clamps.
Item:
4515
MSRP: $83.99 Price:
$75.59
|
Male
Mount Footpeg Extensions
These are made of machined steel and chrome-plated.
|
1-1/2" Footpeg Extensions
(pr)
Item: 8063
MSRP: $39.99 Price:
$35.99
|
|
2-1/2" Footpeg Extensions
(pr)
Item:
8064
MSRP: $39.99 Price:
$35.99
|
Cruise
Pegs for 1500 Vulcan
Installs quickly and solidly with our Magnum Quick Clamps. The
two-inch offset arms rotate to provide a range of adjustment for riders of just
about any height. Available with either large ISO-Wing or Dually ISO-Pegs which
provide a sharp looking, vibration free footrest. Uses a 1.350 quick clamp.
|
Dually ISO-Pegs with
Offset Mounts and 1.35" Clamps (pr)
U.S.
Patent #Des.405,393 and 411.440
Item:
7920
MSRP: $139.99 Price:
$125.99
|
|
Large ISO-Pegs with 1.35"
diameter clamps (pr)
Item:
7933
MSRP: $124.99 Price:
$112.49
|
Replacement Arms for Ergo
Cruise Mounts
Replacement arms are offered both to replace crash or tip-over
damage and to help tailor the footpeg placement for taller or shorter riders.
All Ergo Cruise Pegs come standard with 6" arms.
|
Short Replacement Arms for
Ergo Cruise Pegs (pr)
4-1/2" long
Item:
4060
MSRP: $49.99 Price:
$44.99
|
|
Long Replacement Arms for
Ergo Cruise Pegs (pr)
6" long
Item:
4061
MSRP: $49.99 Price:
$44.99
|
Cruise Pegs with Offsets for Valkyrie
We've noticed a lot of people installing Cruise Pegs on this
curved portion of the engine guard. This kit provides an easily accessible,
secure mounting point. 7966 incorporates footpeg offsets to permit a significant
range of adjustment.
Fits Valkyrie models (including Interstate).
P/N 7988 (not shown) works well for taller riders and is installed in the same
location as 7966.
|
Dually ISO-Peg with Offset
Mounts and 1-1/8"
Magnum Quick Clamp (pr)
U.S.
Patent #Des.405,393 and 411.440
Item:
7966
MSRP: $145.99 Price:
$131.39
|
ISO™-Wing Mini Floorboard
|
Male Mount ISO-Wing (pr)
Item:
4450
MSRP: $103.99 Price:
$93.59
|
Pilot™ Footpegs
Pilot Pegs set the standard in custom footpeg style and function. Their flowing
teardrop profile compliments the shape of several components found on some of
today's cutting edge customs. A variety of models are available for virtually
any application. Notice the similarities in the footpeg, stirrup, and shift peg,
and how great they look as a set. Check out the stirrup arm with its smooth
radius. It even has a built-in heel guard to prevent melting the heel of your
boot on the front pipe.
Add to this a full coverage brake pedal pad. Now the back side of your brake
pedal will look as good as the front. The Mini Pilot Peg is great for passenger
pegs or in applications where the smallest possible footpeg is desired. Aside
from the high tech look of this footpeg family, you get the versatility you're
used to with Küryakyn footpegs. As with the ISO and Retro pegs, our wide variety
of extensions, clamps, and accessories provide endless possibilities for peg
location and application.
|
Pilot Pegs (pr)
INSTALLATION INSTRUCTIONS
Item:
4425
MSRP: $72.99 Price:
$65.69
|
|
Pilot Peg Replacement
Rubber Pads (6 pieces)
Item:
4431
MSRP: $15.99 Price:
$14.39
|
H-D Type Male
Footpeg Adapters
with
Adjustable Stop
We have modified our standard H-D type male footpeg adapters
with an adjustable stop which now makes it possible to install conventional
clamp-on highway pegs on an engine guard that would normally cause the pegs to
angle down toward the ground. We have added a small setscrew to the heel of the
adapter. By adjusting the position of the setscrew, the angle of the footpeg can
be adjusted. Best suited for use with Küryakyn Footpegs with Clevis and Magnum
Quick Clamps.
|
H-D Type Male Footpeg
Adapters with Adjustable Stop (pr)
Item:
8008A
MSRP: $19.99 Price:
$17.99
|
Male
Mount Lockable Offsets
The cogged head lets you adjust the offset for greater
flexibility and a wide variety of applications. Accepts any Küryakyn peg.
Long Right Angle Mounts
with Longhorn ISO-Pegs
.jpg)
This mount is the answer for installing highway pegs on
frame downtubes. The right angle design allows the peg to be positioned
horizontally regardless of the angle of the frame downtube. The added length of
the Longhorn Peg makes for incredible comfort. Select the correct size Magnum
Quick Clamp for your application. (Sold
Separately)
Adjustable Mustache Bar
Yamaha
Get highway pegs without needing bulky or intrusive engine
guards to do so. With the Adjustable Mustache Bar you get the
customization to mount exactly where needed for a comfort level unlike any
other. The perfect position is possible thanks to the ability to move the
pegs both up or down and forward or back. Requires H-D or Küryakyn Male Mount
pegs (sold separately)
|
Adjustable Mustache Bar (ea)
Fits:
All ’99-’10 Yamaha Road Star, ‘08-’10 Raider Models, ‘06-’10
Roadliner & Stratoliner, & All ‘98-’10 V Star 650 Models
INSTALLATION INSTRUCTIONS
Item: 7548
MSRP: $169.99 Price:
$152.99
|
