Dynojet Power Commander

NOTE:

Your Power Commander's firmware may need to be updated to use this device.

Please click HERE for more information

Easy Installation & Mounting

The new LCD Unit can easily be mounted with TECHMOUNT accessory mounting systems. For a complete guide of TECHMOUNT accessory mounting systems, please visit: TECHMOUNTS.COM

The LCD unit can be removed easily from the bike and programmed with desktop computer. Maps can be loaded, stored and the data viewed with the supplied software.

As new functions, screen and features become available the unit can be upgraded by the user using the supplied USB cable and free downloads from www.powercommander.com.

Features:

Displays all Power Commander data "real-time"

Allows storage & switching between multiple mpas

Data logging capable

"On screen" map adjustments

User configurable screens

USB programmable & upgradable

Active matrix TFT LCD 240 x 320 16 bit color screen

Item: 1020-0325
MSRP: ~~$299.95~~ Price: $259.95

Multi-Function Hub

The Multi-Function Hub allows users to access advanced expansion features. Several optional harnesses are available to permit both input and output to/from the module.

NOTE:

Your Power Commander's firmware may need to be updated to use this device.

Please click HERE for more information

Map Selection Switch

Connecting the optional Map Selection Switch allows the rider to switch between two different maps within the Power Commander. For Touring Bikes this could be used to switch between a "fuel economy map" for long rides and a "full performance map".

For Sport Bikes it could be used for applications such as "Dry Nitrous Oxide" kits to permit the user to make the fuel mixture richer when activating the system. Additionally, if the Power Commander has an Ignition Module connected it can switch to a less aggressive timing map at the same time.

Gear Position/Speed Input

Fuel and ignition timing (when using the Dynojet Ignition Module) adjustments can be made based on gear position or speed. The multi-function hub makes it possible for the user to advance the timing in lower gears while retarding it in higher gears.

Boost Input

When using a Power Commander on turbo charged applications the Boost Input option makes it possible to have the fuel automatically increase with boost level. When an adjustable boost controller is used, this capability eliminates the need for re mapping each time the boost level is changed.

Analog Output

Based on the data from the Power Commander and the inputs from the Multi-Function Hub, a solenoid, relay, warning light, etc. can be triggered. This can be used to activate items such as a shift light, Nitrous Oxide system, or air shifter.

	MULTI-FUNCTION HUB KIT Includes: Hub With map switch and handle bar bracket, gear position/speed, pressure input and relay harnesses Item: 1020-0327 MSRP: ~~$189.99~~ Price: $151.99 Quantity
	Hub With map switch and handle bar bracket Item: 1020-0326 MSRP: ~~$159.99~~ Price: $127.99 Quantity

Power Adapters & Cables

AND ACCESSORIES

What is Power Commander?

The Dynojet Power Commander plugs inline with your bike’s stock fuel injection system. It uses OEM (original equipment manufacturer) style connectors making installation easy and quick. The PCIIIusb allows a full range of fuel adjustment, as much as +/- 100% over stock. Adjustments can be made either with a Windows based computer or by using the face plate mounted button adjusters. No permanent changes are made to the bike’s system. Once the unit is removed the bike reverts to its stock settings.

Map Database

Dynojet supports the Power Commander product line with the worlds largest map database. We work with all of the leading exhaust manufacturers from around the globe to bring you pre-tested settings for your motorcycle. No guesswork on your part. Every map that we offer was tested and developed on one of our multiple in house Dynojet Dynamometers using our patented Tuning Link software. New maps are developed weekly for all popular applications. Dynojet continuously maps new calibrations for each bike, which are available for downloading at www.powercommander.com .

Tuning Centers

For custom or specialty applications where it is not possible for us to have a map available, there is a network of Official Dynojet Tuning Centers. These facilities have the required equipment and training to develop custom maps for your vehicle. Click Here for a list of centers near you.

Features:

Hassle free USB communication - The Power Commander USB will instantly and automatically connect to the Power Commander Control Center software once it is installed. Simply "power up" the unit and connect the supplied USB cable to the computer and PCIII USB.

Onboard notes storage - The PCIII USB stores the notes from the map in the onboard memory. This makes it easy to see exactly which map is loaded. The notes, just as the map itself, are automatically retrieved upon connecting to the unit.

Individual cylinder adjustment - All PCIII USB units have a "cylinder trim" adjustment feature that allows you to "offset" fuel to one or more cylinders. Additionally, for advanced users, the PCIII USB allows individual cylinder mapping. Now each cylinder can be mapped individually throughout the entire rpm/throttle position range.

Enhanced "file compare" utility - The PCIII USB software allows you to compare two map files without the Power Commander connected. There is a numerical display as well as a brand new graphical display.

Easier to use "button adjustment" mode - The button adjustment has been made easier by introducing a "startup delay". This lets the user have enough time to start the bike and then switch the PCIII USB into "button adjust" mode. The ranges of the buttons are now displayed in the software. Simply connect the unit to the computer and press one of the buttons. Their ranges are shown on the screen.

"Expansion port" for upgrades and accessories - The "expansion port" allows easy connection of accessories such as our new ignition module, Quick shifter, Multifunction Hub, Pressure Sensor display and LCD display unit. Automatic map retrieval upon connection - As soon as you connect the PCIII USB to the computer and launch the software, the map installed in the PCIII USB will be displayed.

9V "Power Up" adapter - Every PCIII USB comes with a "power up" adapter which allows users to program and interface with the Power Commander on their desktop without being connected to the bike. Accelerator Pump - You can adjust: A) The amount of fuel to add, B) The number of engine revolutions during which fuel is added, C) The sensitivity of throttle movement under which the accelerator pump is activated.

How much additional power will it give my motorcycle?

There are many variables to each application. The Power Commander allows for tuning to the perfect air/fuel ratio will ensure that the engine can produce the maximum possible horsepower for that given combination.

Consider that a typical street rider spends a great deal of time riding in part throttle conditions. Shown below are two graphs of a motorcycle before and after installation of the Power Commander. The top graph line shows the horsepower curve accelerating and the lower graph shows the corresponding air/fuel ratio. You can see a large horsepower increase between the two. The red curve shows a typical stock motorcycle with minor performance modifications (slip-on exhaust).

The blue curve shows that same combination with the Power Commander installed and you can see that the line is nearly straight. Consequently, the rider will feel a large improvement while riding the motorcycle. It is very possible that the peak wide open throttle horsepower is unchanged. The correct air/fuel ratio number (say 12.9:1 or 13.2:1) depends upon many factors like combustion chamber design, but what we want is that figure at every point in the curve (straight line).

POWER COMMANDER III USB (METRICS)

AND ACCESSORIES

BENELLI

BMW-WIDE BAND

DUCATI

HONDA

KAWASAKI

KTM

MOTO GUZZI

TRIUMPH

ACCESSORIES

Power Commander LCD Unit