Wired Audio Headsets -Performance

Wireless (Blue Tooth) Audio Headsets & Accessories

Performance Helmet Headsets (Wired)
 

The new HS-BCD279, HS-ICD279 and HS-ICD284 Series Helmet Headsets

Only the finest quality components are used in their manufacture.

These headsets provide the industry’s best combination of wind and ambient noise reduction with our standard and high-output AeroMike® III miniature microphones.  Superior audio fidelity has been achieved with our new ultra-slim, wide-fidelity and ported DynaPort® helmet speakers. (exact type will vary depending upon application) The versatility of our convenient two-piece cord system allows these headsets to be connected to any factory installed motorcycle audio system ever built, now and in the foreseeable future, just by interchanging the lower-section hook-up cord. Superior design, quality control and attention to detail, you won’t find a better helmet headset available anywhere… you have our name on it.


The new HS-8154B Series Helmet Headsets

They feature two wide-fidelity speakers in stereo, a low-noise dynamic microphone and our single-section 5-pin straight plug hook-up cord, for connection to standard 5-pin audio systems.

********************************************************************

Blue Tooth Audio Headsets & Accessories (Wireless)

All Bluetooth Systems are nonreturnable/nonrefundable UNLESS Defective

J&M Bluetooth Wireless Helmet Headsets

These are full-fidelity stereo Bluetooth wireless helmet headsets.  Superior audio fidelity has been achieved with our DynaPort® and non-ported helmet speakers. (proper acoustical installation required) These headsets provide the industry’s best combination of wind and ambient noise reduction with the AeroMike® III miniature microphones.

Head units feature the new CSR BluecoreV enhanced data rate (EDR) Bluetooth module, for easy pairing to most Bluetooth enabled audio devices available, including J&M’s new custom dongles. Head units are powered by a rechargeable Lithium Ion/Polymer power cell. Universal clamp-on mounting style.

Includes wired intercom feature option to passenger’s standard J&M dual mode helmet headset.

********************************************************************

Cell/Zumo/FRS/Radar Integration Terminal for the JMCB-2003

P-Series Hook-Up Cords

Z-Series Hook-Up Cords

Wired Audio Headsets

Open-face Style Stereo Helmet Headset
 with 5-pin Single-section Hook-up Cord

This helmet headset features two wide-fidelity helmet speakers in stereo, a low-noise dynamic boom microphone and our 5-pin (only), single-section hook-up cord.

It is designed to be installed in most of the 3/4 (open face) style helmets available today.

It utilizes the standard 5-pin din-plug and is tuned for use with the following audio systems:
 

Full-coverage Style Stereo Helmet Headset
 with 5-pin Single-section Hook-up Cord

Dual Mode Universal Headset
w/HO AeroMike for Open Face/Flip-front/Full Face

This new performance series helmet headset from J&M has been designed to be installed into most open face, flip-front and full-coverage style helmets.

It features our high-output AeroMike® III miniature boom microphone (for use with Harley®, Victory® Vision & Kawasaki® audio systems), two of our wide-fidelity ultra-slim helmet speakers in stereo, our universal clamp-on mounting system and the upper section (only) of our P-series 8-pin right-angle hook-up cord.

You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of our AeroMike® III microphone along with the fidelity and dependability of our new ultra-slim helmet speakers.

This headset can be connected to any factory installed motorcycle audio system, now and in the foreseeable future, just by interchanging the lower-section hook-up cord.


HOOK-UP CORDS

You will need to choose a “P” series lower-section hook-up cord from the chart below for proper connection of this headset to your audio system.


#HC-PB to be used with:
1980-2011 Honda® and J&M® 5-pin audio systems.

#HC-PHD to be used with:
1998-2011 Harley® 7-pin audio systems.

#HC-PJM to be used with:
1999-2011 J&M Corp® & BMW® 6-pin audio systems.

#HC-PVT to be used with:
2008-2011 Victory® Vision, Can Am Spyder,and Kawasaki® 7-pin audio systems.

#HC-PC to be used with:
1983-2011 Yamaha®, and Suzuki® 5-pin audio systems.
1989-1997 Harley® and Kawasaki 5-pin audio systems.

Dual Mode Headset w/DynaPort Speakers & HO AeroMike
 for most Open Face

This new performance series helmet headset from J&M has been designed to be installed into most open-face, and can also be used in some of the flip-front style helmets.

It features our high-output AeroMike® III miniature boom microphone (for use with Harley®, Victory® Vision & Kawasaki® audio systems), two of our enhanced-fidelity DynaPort® helmet speakers in stereo, our universal clamp-on mounting system and the upper section (only) of our P-series 8-pin right-angle hook-up cord.

You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of our AeroMike® III microphone along with the superior audio performance offered by our DynaPort helmet speakers. (proper acoustical installation is required)

This headset can be connected to any factory installed motorcycle audio system, now and in the foreseeable future, just by interchanging the lower-section hook-up cord.

HOOK-UP CORDS

You will need to choose a “P” series lower-section hook-up cord from the chart below for proper connection of this headset to your audio system.


#HC-PB to be used with:
1980-2011 Honda® and J&M® 5-pin audio systems.

#HC-PHD to be used with:
1998-2011 Harley® 7-pin audio systems.

#HC-PJM to be used with:
1999-2011 J&M Corp® & BMW® 6-pin audio systems.

#HC-PVT to be used with:
2008-2011 Victory® Vision, Can Am Spyder, and Kawasaki® 7-pin audio systems.

#HC-PC to be used with:
1983-2011 Yamaha®, and Suzuki® 5-pin audio systems.
1989-1997 Harley® and Kawasaki 5-pin audio systems.

Dual Mode Helmet Headset
for Full-face Style Helmets
 

This new performance series helmet headset from J&M has been designed to be installed into many of the full-face style helmets.

It features our AeroMike® III miniature chin-bar microphone cartridge, two of our wide-fidelity helmet speakers in stereo, our universal clamp-on mounting system and the upper section (only) of our P-series 8-pin right-angle hook-up cord.

You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of our AeroMike® III microphone along with the superior audio performance offered by our wide-fidelity helmet speakers. (proper acoustical installation is required)

This headset can be connected to any factory installed motorcycle audio system, now and in the foreseeable future, just by interchanging the lower-section hook-up cord.

HOOK-UP CORDS

You will need to choose a “P” series lower-section hook-up cord from the chart below for proper connection of this headset to your audio system. (you may back up to the previous headset page to purchase the necessary lower cord)

#HC-PB to be used with:
1980-2011 Honda® and J&M® 5-pin audio systems.

#HC-PHD to be used with:
1998-2011 Harley® 7-pin audio systems.

#HC-PJM to be used with:
1999-2011 J&M Corp® & BMW® 6-pin audio systems.

#HC-PVT to be used with:
2008-2011 Victory® Vision, Can Am Spyder,and Kawasaki® 7-pin audio systems.

#HC-PC to be used with:
1983-2011 Yamaha®, and Suzuki® 5-pin audio systems.
1989-1997 Harley® and Kawasaki 5-pin audio systems.

Slide-in Shorty-Style Stereo Helmet Headset w/HO Mike

This new high performance J&M helmet headset has been designed to be installed into most of the shorty-style helmets available in the marketplace today.

It features our new high-output AeroMike® III miniature boom microphone (for use with Harley®, Victory® Vision & Kawasaki® audio systems), two of our wide-fidelity helmet speakers in stereo, our new slide-in shorty-style mounting system, along with the upper section (only) of our P-series 8-pin hook-up cord built into the headset pouch.

This is the best performing and most versatile shorty-style helmet headset on the market today and can be removed or re-installed in a matter of minutes to suit your riding needs.

You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of our high-output AeroMike® III microphone.

This headset can be connected to any factory installed motorcycle audio system in existence today, now and in the foreseeable future, just by interchanging the lower-section hook-up cord.


HOOK-UP CORDS

You will need to choose a “P” series lower-section hook-up cord from the chart below for proper connection of this headset to your audio system. (you may back up to the previous headset page to purchase the necessary lower cord)

#HC-PB to be used with:
1980-2011 Honda® and J&M® 5-pin audio systems.

#HC-PHD to be used with:
1998-2011 Harley® 7-pin audio systems.

#HC-PJM to be used with:
1999-2011 J&M Corp® & BMW® 6-pin audio systems.

#HC-PVT to be used with:
2008-2011 Victory® Vision, Can Am Spyder,and Kawasaki® 7-pin audio systems.

#HC-PC to be used with:
1983-2011 Yamaha®, and Suzuki® 5-pin audio systems.
1989-1997 Harley® and Kawasaki 5-pin audio systems.

Dual Mode Integrated Headset w/HO AeroMike®
for KBC TourCom Helmet

This helmet headset has been designed to be installed into the KBC TourCom helmet.

It features our high-output AeroMike® III miniature boom microphone (for use with Harley®, Victory® Vision & Kawasaki® audio systems), two of our enhanced-fidelity DynaPort® helmet speakers in stereo, our exclusive integrated headset mounting system and the upper section (only) of our P-series 8-pin right-angle hook-up cord.

You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of our AeroMike® III microphone along with the fidelity and performance of our DynaPort helmet speakers.

This headset can be connected to any factory installed motorcycle audio system, now and in the foreseeable future, just by interchanging the lower-section hook-up cord.

HOOK-UP CORDS

You will need to choose a “P” series lower-section hook-up cord from the chart below for proper connection of this headset to your audio system. (you may back up to the previous headset page to purchase the necessary lower cord)

#HC-PB to be used with:
1980-2011 Honda® and J&M® 5-pin audio systems.

#HC-PHD to be used with:
1998-2011 Harley® 7-pin audio systems.

#HC-PJM to be used with:
1999-2011 J&M Corp® & BMW® 6-pin audio systems.

#HC-PVT to be used with:
2008-2011 Victory® Vision, Can Am Spyder,and Kawasaki® 7-pin audio systems.

#HC-PC to be used with:
1983-2011 Yamaha®, and Suzuki® 5-pin audio systems.
1989-1997 Harley® and Kawasaki 5-pin audio systems.

Dual Mode Integrated Headset w/HO AeroMike
 for Nolan N-102 N-Com Helmets

This new performance series helmet headset from J&M has been designed to be installed into the Nolan N-102 N-Com helmet (Only).

It features our high-output AeroMike® III miniature boom microphone (for use with Harley®, Victory® Vision & Kawasaki® audio systems), two of our wide-fidelity helmet speakers in stereo, our exclusive integrated headset mounting system and the upper section (only) of our P-series 8-pin right-angle hook-up cord.

You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of our AeroMike® III microphone along with the fidelity and dependability of our wide-fidelity helmet speakers.

This headset can be connected to any factory installed motorcycle audio system, now and in the foreseeable future, just by interchanging the lower-section hook-up cord.

HOOK-UP CORDS

You will need to choose a “P” series lower-section hook-up cord from the chart below for proper connection of this headset to your audio system. (you may back up to the previous headset page to purchase the necessary lower cord)

#HC-PB to be used with:
1980-2011 Honda® and J&M® 5-pin audio systems.

#HC-PHD to be used with:
1998-2011 Harley® 7-pin audio systems.

#HC-PJM to be used with:
1999-2011 J&M Corp® & BMW® 6-pin audio systems.

#HC-PVT to be used with:
2008-2011 Victory® Vision, Can Am Spyder,and Kawasaki® 7-pin audio systems.

#HC-PC to be used with:
1983-2011 Yamaha®, and Suzuki® 5-pin audio systems.
1989-1997 Harley® and Kawasaki 5-pin audio systems.

Dual Mode Integrated Headset w/HO AeroMike
 for Nolan N-42 N-Com Helmets

This new performance series helmet headset from J&M has been designed to be installed into the Nolan N-42 N-Com helmet (Only).

It features our high-output AeroMike® III miniature boom microphone (for use with Harley®, Victory® Vision & Kawasaki® audio systems), two of our wide-fidelity helmet speakers in stereo, our exclusive integrated headset mounting system and the upper section (only) of our P-series 8-pin right-angle hook-up cord.

You will appreciate the superior ambient noise canceling and wind blocking ability of the latest version of our AeroMike® III microphone along with the fidelity and dependability of our wide-fidelity helmet speakers.

This headset can be connected to any factory installed motorcycle audio system, now and in the foreseeable future, just by interchanging the lower-section hook-up cord.


HOOK-UP CORDS

You will need to choose a “P” series lower-section hook-up cord from the chart below for proper connection of this headset to your audio system. (you may back up to the previous headset page to purchase the necessary lower cord)

#HC-PB to be used with:
1980-2011 Honda® and J&M® 5-pin audio systems.

#HC-PHD to be used with:
1998-2011 Harley® 7-pin audio systems.

#HC-PJM to be used with:
1999-2011 J&M Corp® & BMW® 6-pin audio systems.

#HC-PVT to be used with:
2008-2011 Victory® Vision, Can Am Spyder,and Kawasaki® 7-pin audio systems.

#HC-PC to be used with:
1983-2011 Yamaha®, and Suzuki® 5-pin audio systems.
1989-1997 Harley® and Kawasaki 5-pin audio systems.

Cell/Zumo/FRS/Radar Integration Terminal for the JMCB-2003

This new component terminal will integrate the audio signals from a cell phone, Garmin Zumo, Motorola T-series FRS portable two-way radio and/or certain radar detectors, together with the JMCB-2003 audio system.

By using the correct combination of accessory harnesses you can custom design the specific features of your audio system.

Note: This component terminal requires at least one of the available accessory harnesses to operate.

P-Series Hook-Up Cords

(HC-PB) P-Series Lower-Section 8-pin Cord
For 1980-2011 Honda/J&M 5-pin Audio Systems

This P-Series 8-pin lower-section hook-up cord is to be used with all J&M headset series #’s HS-ICD284, HS-BCD279, HS-ICD279, HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174, HS-ICD174 and #HS-CD9174 series helmet headsets, for connection to 1980-2011 Honda® and J&M® 5-pin audio systems.

(HC-PHD) P-Series Lower-section 8-pin Cord
 For: 1998-2011 Harley® 7-pin audio systems

This P-Series 8-pin lower-section hook-up cord is to be used with all J&M headset series #’s HS-ICD284, HS-BCD279, HS-ICD279, HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174, HS-ICD174 and #HS-CD9174 series helmet headsets, for connection to 1998-2011 Harley® 7-pin audio systems.

(HC-PJM) P-Series Lower-section 8-pin Cord
 For: 1999-2011 J&M Corp® & BMW® 6-pin systems

This P-Series 8-pin lower-section hook-up cord is to be used with all J&M headset series #’s HS-ICD284, HS-BCD279, HS-ICD279, HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174, HS-ICD174 and #HS-CD9174 series helmet headsets, for connection to 1999-2011 J&M Corp® & BMW® 6-pin audio systems.

(HC-PC) P-Series Lower 8-pin cord
For: 1983-2011 Yamaha or 1989-1997 Harley®/Kaw/Suz 5-pin systems

This P-Series 8-pin lower-section hook-up cord is to be used with all J&M headset series #’s HS-ICD284, HS-BCD279, HS-ICD279, HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174, HS-ICD174 and #HS-CD9174 series helmet headsets, for connection to 1983-2011 Yamaha® 5-pin audio systems, 1989-1997 Harley®, Kawasaki® Suzuki® 5-pin audio systems and 1988-2000 Honda® GL-1500 with J&M passenger controller.

(HC-PVT) P-series Lower 8-pin Hook-Up cord
For: 2008-2011 Kawasaki®, Can-Am® Spyder & Victory® Vision 7-pin audio systems.

(HC-PBV) P-Series Lower 8-pin cord W/Volume Control
 For: 1980-2011 Honda® and J&M® 5-pin audio systems

This heavy-duty P-Series 8-pin lower-section hook-up cord with in-line volume control, can be used with all J&M® headset #’s HS-ICD284, HS-BCD279, HS-ICD279, HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174, HS-ICD174 and #HS-CD9174 series helmet headsets, for connection to 1980-2011 Honda® and J&M® 5-pin audio systems.

(HC-PMV) P-Series Lower 8-pin cord W/Volume Control
For: 1999-2011 J&M Corp® & BMW® 6-pin systems

This heavy-duty P-Series 8-pin lower-section hook-up cord with in-line volume control, can be used with all J&M® headset #’s HS-ICD284, HS-BCD279, HS-ICD279, HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174, HS-ICD174 and #HS-CD9174 series helmet headsets, for connection to 1999-2011 J&M Corp® & BMW® 6-pin audio systems.

(HC-PAL) P-Series Component/replacement 8-pin,
 upper-section, right-angle, hook-up cord

This is our P-series component 8-pin upper-section right-angle hook-up cord.

It may also be used as a replacement for the 8-pin upper-section hook-up cord that is included with J&M® Series headset #’s HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174 and HS-ICD174.

(HC-PBT) Lower Section 8-Pin Cord
For: Passenger-To-Driver’s JM Bluetooth® Clamp-on Headset

This new P-Series 8-pin lower-section hook-up cord can be used with all J&M headset series #’s HS-BCD279, HS-ICD279- HS-ICD284, HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174, HS-ICD174 and #HS-CD9174 series helmet headsets, for connection to the rear jack on the J&M #HS-BLU277 series Bluetooth clamp-on helmet headsets, for seamless and simultaneous driver/passenger communications.

Z-Series Hook-Up Cords

(HC-ZB) Z-Series Lower-Section 8-pin Cord
 For: 1980-2011 Honda® and J&M® 5-pin audio systems

This heavy-duty Z-Series 8-pin lower-section hook-up cord is to be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets for connection to 1980-2011 Honda® and J&M® 5-pin audio systems.

(HC-ZHD) Z-Series Lower-section 8-pin Cord
For: 1998-2011 Harley® 7-pin audio systems
 

This heavy-duty Z-Series 8-pin lower-section hook-up cord is to be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets, for connection to 1998-2011 Harley® 7-pin audio systems.

(HC-ZJM) Z-Series Lower-section 8-pin Cord
For: 1999-2011 J&M Corp® & BMW® 6-pin systems

This heavy-duty Z-Series 8-pin lower-section hook-up cord is to be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets, for connection to 1999-2011 J&M Corp® & BMW® 6-pin audio systems.

(HC-ZC) Z -Series Lower 8-pin cord
For: 1983-2011 Yamaha® or 1989-1997 Harley®/Kaw/Suz 5-pin systems and 1988-2000 Honda GL1500 with J&M passenger controller

This heavy-duty Z-Series 8-pin lower-section hook-up cord is to be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets for connection to 1983-2011 Yamaha® or 1989-1997 Harley®/Kaw/Suz 5-pin systems and 1988-2000 Honda GL1500 with J&M passenger controller

(HC-ZVT) Z-series Lower 8-pin Hook-Up cord
 For: 2008-2011 Kawasaki®, Can-Am® Spyder & Victory® Vision 7-pin systems

This heavy-duty Z-Series 8-pin lower-section hook-up cord is to be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets for connection to 2008-2011 Kawasaki®, Can-Am® Spyder & Victory® Vision 7-pin systems.

(HC-ZBV) Z-Series Lower 8-pin cord W/Volume Control
For: 1980-2011 Honda® and J&M® 5-pin audio systems

This heavy-duty Z-Series 8-pin lower-section hook-up cord, with in-line volume control, can be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets for connection to 1980-2011 Honda® and J&M® 5-pin audio systems

(HC-ZMV) Z -Series Lower 8-pin cord W/Volume Control
For: 1999-2011 J&M Corp® & BMW® 6-pin systems

This heavy-duty Z-Series 8-pin lower-section hook-up cord, with in-line volume control, can be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets for connection to 1999-2011 J&M Corp® & BMW® 6-pin audio systems.
 

(HC-ZB-S) Z-Series Lower-section 8-pin cord w/Ear-speaker Jack
For: 1980-2011 Honda/J&M 5-pin systems

This heavy-duty Z-Series 8-pin lower-section hook-up cord, with ear-speaker jack, can be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets for connection to 1980-2011 Honda® and J&M® 5-pin audio systems.

This new cord gives you a convenient way to connect ear-canal type speakers, while still allowing your helmet mounted speakers to play simultaneously.

Warning Note:
The use of ear-canal type speakers while riding your motorcycle, WILL significantly reduce your ability to hear horns, sirens, emergency vehicles and/or other safety-critical traffic noises around you.

Ear-canal speakers should NEVER be used in congested or urban traffic riding environments, where not being able to hear critical traffic and other noises could raise the risk of an accident or serious injury to you and/or your passenger.

Ear-canal speakers should ONLY be used while riding on non-congested open highways for extended periods, to reduce the possibility of hearing damage, caused by long term exposure to high noise levels.

The user therefore assumes all risks associated with using ear-canal type speakers.

(HC-ZJM-S) Z-Series Lower-section 8-pin cord w/Ear-speaker Jack
For: ‘99-‘11 J&M® & BMW® 6-pin systems

This heavy-duty Z-Series 8-pin lower-section hook-up cord, with ear-speaker jack, can be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets for connection to 1999-2011 J&M Corp® & BMW® 6-pin audio systems.

This new cord gives you a convenient way to connect ear-canal type speakers, while still allowing your helmet mounted speakers to play simultaneously.

Warning Note:
 The use of ear-canal type speakers while riding your motorcycle, WILL significantly reduce your ability to hear horns, sirens, emergency vehicles and/or other safety-critical traffic noises around you.

Ear-canal speakers should NEVER be used in congested or urban traffic riding environments, where not being able to hear critical traffic and other noises could raise the risk of an accident or serious injury to you and/or your passenger.

Ear-canal speakers should ONLY be used while riding on non-congested open highways for extended periods, to reduce the possibility of hearing damage, caused by long term exposure to high noise levels.

The user therefore assumes all risks associated with using ear-canal type speakers.

(HC-ZHD-S) Z-Series Lower-section 8-pin cord w/Ear-speaker Jack
For: ‘98-‘11 Harley® 7-pin systems

This heavy-duty Z-Series 8-pin lower-section hook-up cord, with ear-speaker jack, can be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 headsets for connection to 1998-2011 Harley® 7-pin audio systems.

This new cord gives you a convenient way to connect ear-canal type speakers, while still allowing your helmet mounted speakers to play simultaneously.

Warning Note:
 The use of ear-canal type speakers while riding your motorcycle, WILL significantly reduce your ability to hear horns, sirens, emergency vehicles and/or other safety-critical traffic noises around you.

Ear-canal speakers should NEVER be used in congested or urban traffic riding environments, where not being able to hear critical traffic and other noises could raise the risk of an accident or serious injury to you and/or your passenger.

Ear-canal speakers should ONLY be used while riding on non-congested open highways for extended periods, to reduce the possibility of hearing damage, caused by long term exposure to high noise levels.

The user therefore assumes all risks associated with using ear-canal type speakers.

(HC-ZAL) Z-Series Component / replacement 8-pin, upper-section,
 right-angle, hook-up cord

This is our heavy-duty Z-series component 8-pin upper-section right-angle hook-up cord.

It may also be used as a replacement for the 8-pin upper-section hook-up cord that is included with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269.

This cord part# HC-ZAL supersedes the previous part#’s HC-AAL and HC-AA as they are all interchangeable.

J&M Bluetooth Wireless Helmet Headsets
 & Accessories

Integrated Bluetooth Stereo Headset
For: Nolan® N103 Helmet

&M’s # HS-BLU277EDRI-N103 is a full-fidelity stereo Bluetooth helmet headset, designed specifically for the Nolan® N103 helmet.

Superior audio performance has been achieved with our wide-fidelity ultra-slim helmet speakers.  This headset also provides the industry’s best combination of wind and ambient noise reduction with the AeroMike® III miniature boom microphone.  J&M built audio/Bluetooth control head unit features the new CSR BluecoreV enhanced data rate (EDR) module, for easy pairing to most Bluetooth enabled audio devices available, including J&M’s new custom dongles.

Includes Bluetooth Software Profiles; HSP (Headset Profile), HFP (Hands Free Profile), A2DP (Advanced Audio Distribution Profile ((Streaming Stereo))), AVRCP (Audio Video Remote Control Profile) and JMAHP (J&M Motorcycle Audio Headset Profile).

Control head is powered by a rechargeable Lithium Ion/Polymer power cell built into the lower helmet trim section, providing 30+ hours of use from a full charge.

This headset kit includes J&M audio/Bluetooth control head, two wide-fidelity ultra-slim helmet speakers, the AeroMike III boom mike, a 1,700 mah Lithium Ion/polymer power cell, (boom mike, power cell and on/off switch built into supplied replacement lower helmet trim section) 110/220v charger adapter/transformer and complete installation/operation instructions.

Integrated Bluetooth Stereo Headset
For: Nolan® N102 N-Com Helmet

J&M’s # HS-BLU277EDRI-N102 is a full-fidelity stereo Bluetooth helmet headset, designed specifically for the Nolan N-102 N-Com helmet.

Superior audio performance has been achieved with our wide-fidelity helmet speakers. This headset also provides the industry’s best combination of wind and ambient noise reduction with the AeroMike® III miniature boom microphone.

J&M built audio/Bluetooth control head unit features the new CSR BluecoreV enhanced data rate (EDR) module, for easy pairing to most Bluetooth enabled audio devices available, including J&M’s new custom dongles.

Includes Bluetooth Software Profiles; HSP (Headset Profile), HFP (Hands Free Profile), A2DP (Advanced Audio Distribution Profile ((Streaming Stereo))), AVRCP (Audio Video Remote Control Profile) and JMAHP (J&M Motorcycle Audio Headset Profile).

Control head is powered by a rechargeable Lithium Ion/Polymer power cell built into the lower helmet trim section, providing 30+ hours of use from a full charge.

This headset kit includes J&M audio/Bluetooth control head, two wide-fidelity helmet speakers, the AeroMike III boom mike, a 1,700 mah Lithium Ion/polymer power cell, (boom mike, power cell and on/off switch built into supplied replacement lower helmet trim section) 110/220v charger adapter/transformer and complete installation/operation instructions

Replacement EDR Bluetooth Clamp-on Control Head ONLY

J&M’s #HS-BLU277EDR-RCH is a full-fidelity stereo Bluetooth amplifier/control head ONLY.

Bluetooth control head unit features the new CSR BluecoreV enhanced data rate (EDR) Bluetooth module, for easy pairing to most Bluetooth enabled audio devices available, including J&M’s new custom dongles with the JMAHP software profile.

Includes Bluetooth Software Profiles; HSP (Headset Profile), HFP (Hands Free Profile), A2DP (Advanced Audio Distribution Profile ((Streaming Stereo))), AVRCP (Audio Video Remote Control Profile) and JMAHP (J&M Motorcycle Audio Headset Profile).

Control head is powered by a rechargeable Lithium Ion/Polymer power cell providing 9-13 hours of use from a full charge. Universal clamp-on mounting style, with wired intercom feature option to passenger’s standard J&M dual-mode helmet headset. (see #HC-PBT lower section cord info)

This replacement control head kit includes mounting hardware and a 110/220v charger adapter/transformer.

Stereo Bluetooth® Dongle with Radar Audio Interrupt
 

The JBLU-DNG01 is a custom-built J&M Bluetooth® Dongle that will plug into your favorite I-Pod, satellite radio receiver or other personal music device, via the standard 3.5mm 3-pin plug, to transmit two-channel stereo to your Bluetooth helmet headset.

Unit also features a port to connect to selected radar detectors, using one of the optional J&M radar detector harness adapters, so that the beeps/brapps from the radar detector will be heard over the music, while in addition providing the power/ground connections for the radar detector.

This unit links via Bluetooth software profile A2DP (Advanced Audio Distribution Profile ((streaming stereo)).

Unit is motorcycle powered with 12v power and ground connections into your motorcycle’s electrical system (no batteries to charge).

Kit includes dongle module, optional plug-in ground loop isolator, 3.5mm 3-conductor music input plug and a complete installation/operation manual.
 

A2DP Bluetooth® Stereo Dongle
For: Universal Stereo Headset Jack

This small, compact and easy to use A2DP Bluetooth stereo dongle will connect to most any stereo source, via the standard 3.5mm 3-con stereo jack, to link and provide 2 channel stereo to J&M’s Bluetooth helmet headsets.

110v wall charger included.

JBLU-DNG03 Harness Connection Cable
 For: 1998 & later Harley® Ultra Driver Position

This harness cable assembly is designed to integrate the J&M custom dongle #JBLU-DNG03, to the driver headset position, for the stock audio system on the 1998 and later Harley Ultra Classic.

Dongle is placed inside the left front lower fairing storage pocket when in use and linked to a J&M Bluetooth helmet headset (only).

The J&M Bluetooth headset/dongle combination when used in this configuration will provide all of the standard functions of a normal corded headset as used on the Harley Ultra audio system, but without the cord, including stereo music to the driver’s headset, driver/passenger intercom, CB radio etc.

The stock Harley corded headset connector can still be used, when the dongle is not plugged into this cable harness

JBLU-DNG03 Harness Connection Cable
 For: Cell-Phone/MotorolaFRS/I-Pod/Zumo/MP3

This harness cable assembly is designed to integrate the J&M custom dongle #JBLU-DNG03, to a wide variety of portable audio components.

Dongle is to be placed inside a fairing or tank-bag storage compartment/pocket when in use and linked to a J&M Bluetooth helmet headset (only). (individual harness cable lengths are approximately 30”)

The J&M Bluetooth headset/dongle combination when used in this configuration will provide a wide variety of connection options with connection plugs on the harness for the standard 3-pin cell-phone jack, the 4-pin jack on the I-Phone or Blackberry, along with simultaneous connection to a Motorola T-series (single plug type) FRS two-way radio with handlebar PTT switch, an I-Pod or other MP3 music source OR the Garmin Zumo’s line-out and mike in jacks.

This very versatile connection harness can turn your J&M Bluetooth headset/dongle combination into a virtually complete motorcycle audio system

Repl 650 MAH Lithium Ion Battery
For: HS-BLU277 Clamp-on Style Helmet Headset

1,050 MAH Lithium Ion Battery Upgrade
For: HS-BLU277 Clamp-on Style Helmet Headset
 

1,050 MAH Lithium Ion “fat” battery upgrade for all HS-BLU277 series clamp-on helmet headsets, providing 14-18 hours of operation per charge.

12v Charger/Adapter
For: HS-BLU277 Clamp-on Style Helmet Headset
 

12v car type charger/adapter for all J&M #HS-BLU277 series clamp-on Bluetooth helmet headsets.

Repl110-240V A/C Charger/Adapter
For: HS-BLU277 Clamp-on Style Helmet Headset

Replacement 110-240V A/C charger/adapter kit for all J&M #HS-BLU277 series clamp-on Bluetooth helmet headsets. (includes international adapters)

Ear-canal Speaker Adapter Cable
For: HS-BLU277EDR-FF/OF/FL/UN Headsets

This new cord gives you a convenient way to connect ear-canal type speakers to the J&M #HS-BLU277EDR-FF/FL/OF/UN Bluetooth helmet headsets, while still allowing your helmet mounted speakers to play simultaneously.

Warning Note:

The use of ear-canal type speakers while riding your motorcycle, WILL significantly reduce your ability to hear horns, sirens, emergency vehicles and/or other safety-critical traffic noises around you.

Ear-canal speakers should NEVER be used in congested or urban traffic riding environments, where not being able to hear critical traffic and other noises could raise the risk of an accident or serious injury to you and/or your passenger.

Ear-canal speakers should ONLY be used while riding on non-congested open highways for extended periods, to reduce the possibility of hearing damage, caused by long term exposure to high noise levels.

The user therefore assumes all risks associated with using ear-canal type speakers.

1,700 mah Lithium Ion Battery Replacement
 For: EDRI Hdst-J&M Dongle

Replacement 1,700 mah Lithium/Ion/Polymer power-cell for J&M Bluetooth headset part #’s HS-BLU277EDRI-N103, HS-BLU277EDRI-N102 and J&M Bluetooth Dongle part# JBLU-DNG03.