by Street Magic Cycle Products™

Your stock rear turn signals are just that - turn signals. You can add a controller to convert them to run/brake or turn OR for a few more dollars you can upgrade them to a super bright low current

draw all LED solution that will perform run/brake AND turn functions simultaneously!

 

Dynamic Clusters™  are a multi-color LED Clusters used for rear turn signal applications. The clusters contains 48 super bright LEDs. The outer ring contains 24 Amber LEDS while all 24 inner LEDs are dual intensity Red. The Amber LEDs are connected to a  base while the dual intensity Red LEDs are connected to 3' wire pigtails.  These clusters will fit all Harley Davidson, and most metric cruiser turn signals including Honda VTX, Yamaha V-Star/Road Star, Kawasaki Mean Streak/Vulcan/Drifter, or any other turn signal that has room for a 1.8" diameter cluster.

These clusters can be wired as: Red low intensity Running light, Red High Intensity Brake Light, and Amber High Intensity Turn Signals, this allows your rear turn signals to be converted from simple turn signals to Dynamic running, brake, and turns signals, all in one unit!!! Installation is very simple, just plug the base to the stock turn signal housing receptacle, run the orange running light wire and the red brake light wires through the stock turn signal steams back to the taillight, connect the orange wire  to the stock running light and the red wire to the stock brake light wire with the supplied posi-tap connectors. The clusters can be secured into the stock housing with epoxy or hot glue.

Dynamic Clusters™ can be used with  Amber, Clear or Smoked Lenses, check out our lenses here. The Red LEDs are so powerful they will shine Red though most stock Amber lenses, however a more dynamic effect can be achieved with smoked or clear lenses.

Dynamic Clusters™ have a Life Time Warranty.

Dynamic Clusters™ are NOT Dot approved, for off road or show use only.

A load equalizer may be need to slow down turn signal flash rate.