Motorcycle Lighting

Motorcycle Lights and Motorcycle Accessories

Motorcycle LED

919-554-0949
800-382-1388

Upcoming Rally: Delmarva Bike Week, Winter Place Park, Salisbury, MD Sept 17-20

All CD Products

New CD Products

Gift Certificates

LED Accent Lights

LED Light Bars

LED Turn Signals

LED Taillights

License Plate
 Frames

Motorcycle Headlamps    

Electrical

Air Ride Remote

Harley Davidson

Can Am Spyder

Metrics

Sport Bikes

M109

Raider

Stryker

Fury

Victory

Truck

               

 

Yamaha Raider Accessories & LEDs


Custom Dynamics® LED
Rear Turn Signals


Custom Dynamics® LED Front Turn Signals


MagicFLEX® LED
Accent Lights


Blaster-X Integrated LED
Tail Light


Universal GEN2 Magic
Brake Light Flasher


TruWRAPZ® LED
Turn Signals


Custom Dynamics® SMART Triple Play®


Lightbar w/Spotlights


FuelPak


Magical Wizard Lights
with TruMAGIC

 

Motorcycle Lights and Motorcycle Accessories


Swept Floorboard Kit


Stealth Big Air Kit


Slam Kit


Big Radius 2-into-1 Exhaust


STACKEDD or CURVEDD Exhaust Systems


Raider Stingerz® Rear LED Turn Signals

Amber Turn Signals

Red Turn Signals

Amber/Red/Amber Integrated
Turn Tail Light

by Custom Dynamics®

Our Stingerz® Rear LED turn signal arrays are made to replace your stock turn signals giving your bike a clean custom look.  The chrome bracket contains ours Reactor LEDs  for maximum performance and visibility. These are the same LEDs that we use in our popular truck tailgate light bars.  Our Rear LED units are available in Amber/Amber or Red/Red for turn signals and Amber/Red/Amber for integrated turns signals, running light, and brake light.

Non DOT Approved

A Load Equalizer may be needed for proper flash rate

Lifetime warranty against LED failure.

Does Not fit 2015 Raider and Stryker

Raider Stingerz® Rear LED Array Turn Signals Amber
Fits:  All Yamaha Raiders

Item: RAIDREAR-LED-AMBER
MSRP:
$99.95
Quantity
Raider Stingerz® Rear LED Array Turn Signals Red
Fits:  All Yamaha Raiders

Item: RAIDREAR-LED-RED
MSRP:
$99.95
Quantity
Raider Stingerz® Rear LED Array Turn Signals Amber/Red/Amber
Fits:  All Yamaha Raiders

Item: RAIDREAR-LED-ARA
MSRP:
$99.95
Quantity

Raider TruFLEX® Integrated Rear LED Turns Signals

by Custom Dynamics®

Our TruFLEX® Rear LED turn signal arrays are made to replace your stock turn signals giving your bike a clean custom look.  The chrome bracket contains our TruFLEX® LEDs  for maximum performance and visibility.  Contains 75 Dual Intensity Run-Brake Red LEDS, and 25 Amber Turn Signal LEDS per side.

Non DOT Approved

A Load Equalizer may be needed for proper flash rate

Lifetime warranty against LED failure.

Instructions

Does Not fit 2015 Raider and Stryker

Raider TruFLEX® Rear LED Array Turn Signals
Fits:  All Yamaha Raiders

Item: RAIDREAR-TFLED-ARA
MSRP:
$129.95
Quantity

 


Yamaha Raider Stingerz® Front LED Turn Signals

 

 

Our Stingerz® Front LED turn signal arrays are made of aircraft grade T6061 billet aluminum with a perfect chrome finish.  The chrome housing contains our Reactor™ LEDs  for maximum performance and visibility. These are the same LEDs that we use in our popular truck tailgate light bars.
  Our front LED units are available in White.  Units are single intensity (turn signals) or use our Dual Converter module (included) to add running light function.

 Non DOT Approved

A Load Equalizer may be needed for proper flash rate

Lifetime warranty against LED failure.

Does Not fit 2015 Raider and Stryker

Raider Stingez®  Front LED Array Turn Signals-White
Fits: 
All Yamaha Raiders Except a 2014 Raider SCL

Item:
RAIDFRONT-LED-WHITE
MSRP:
$99.95
Quantity

TruFLEX® Raider LED Front Turn Signals

Our TruFLEX® Front LED turn signal arrays are made of aircraft grade T6061 billet aluminum with a perfect chrome finish.  The chrome housing contains our TruFLEX® LEDs  for maximum performance and visibility in a low profile Slimline package.
  Our front LED units are available in Amber.  Amber Units are single intensity (turn signals) add our Dual Converter module (included) to add running light function.

 Non DOT Approved

30 LEDs per side.

A Load Equalizer may be needed for proper flash rate

Lifetime warranty against LED failure

 

Does Not fit 2015 Raider and Stryker

Raider TruFLEX® Front LED Array Turn Signals-Amber
Fits:
All Yamaha Raiders Except a 2014 Raider SCL

Item:
RAIDFRONT-TFLEDAMBER
MSRP:
$139.95
Quantity

 


2008-2014 Yamaha Raider Blaster-X Integrated LED Tail Light

by Custom LED


Integrated LED Tail Light
Warrior shown, same internals

Custom LED Yamaha Raider Blaster-X Integrated LED Tail Light Features:

Complete Plug and Play Integrated LED tail light with high quality clear lens - OEM fit
Features our Microprocessor based Blaster-X Technology with Brake Alert and Strobe Mode built in!
 Programming Interface allows users to easily customize features!
 Sure-Blink Technology
Plug and play connectivity with OEM connectors!
2-year  Warranty &  Satisfaction Guarantee!

Made in the USA!

Complete Plug and Play Tail Light



2008-2014 Yamaha Raider Tail Light Complete Unit

 

This is an ultra-high intensity, high-performance, Microprocessor controlled Integrated LED Tail Light for the 2008-2014 Yamaha Raider.

This product features our proprietary and patented Blaster-XBrake Alert and Strobe Mode!  With this product, your turn signals are built right into the tail light!  It's the best fender eliminator money can buy.

Brake Alert automatically provides a few quick ultra-bright strobe pulses of light the instant the brakes are applied.  This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists!  The number of pulses can be user-configured VIA our  Programming Interface!  It can also be disabled if desired.

Strobe Mode is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention.  This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light.  Strobe mode is engaged by grounding a control wire, and can be engaged at any time.

Blaster-X is our proprietary pulse-width-modulation technology that squeezes the maximum possible illumination power out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors.

 This product also marks the introduction of our  Programming Interface which allows users to easily customize features of the tail light.  The customizable features menu allows users to:

Enable or Disable the Startup Sequence.

Set the number of pulses in the Brake Alert feature (can set to zero to disable Brake Alert).

Adjust the running light brightness within a preset range.

Adjust the brake light brightness within a preset range.

Engage Demo Mode, where the tail light cycles through all functions automatically and repeatedly!

Reset factory defaults.

This programming interface is accessed very simply through the Strobe Mode control wire!  The interface is designed to receive input simply by providing ground pulses to the strobe mode control wire.  No special equipment is necessary to access and utilize the programming interface!  Detailed programming instructions will ship with every unit.

 And last but not least, our  Sure-Blink Technology.  Our Integrated Tail Lights are designed to follow the turn signal commands of the motorcycles flasher relay.  This insures it is compatible with all after market and OEM flasher relays.  However, in the event that the tail light receives a command to turn that does not break (blink) within a preset time period, the tail light will automatically blink that side.  This feature is most useful in preventing common no-blink problems that are associated with retrofitting motorcycles to LEDs.

Just as on the other Custom LED integrated LED tail light models, the system is designed so that the red LEDs turn off (on one side) when the yellow LEDs come on, so that the turn indication is a pure and distinct yellow light.  The unit automatically flashes between the red and yellow on the side you're turning!  The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible!  Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

Does Not fit 2015 Raider and Stryker

Yamaha Raider Blaster-X Complete Unit
Fits: 2008-2014 Yamaha Raider (Does not fit 2014 Raider SCL)

Installation Instructions

Item:
CLEDRAIDERCPT
MSRP: $129.99  Price: $123.49

Quantity


Metric/Universal GEN2 Magic Brake Light Flasher

 

 

 

 

Simple Click Installation. Just cut the brake line wire and install the Magic Brake Light Flasher
with the enclosed Posi-Taps

10 User Selectable Flash/Strobe Patterns

Over Current Protection

Thermal Protection

Short Circuit Protection

Reverse Wiring Protection

84 Watts Max Power Rating, 12VDC

Works with LEDs or Incandescent Bulbs

Sealed, Weather Tight  Case

Compact Size: 2.25" x  1.25"  x  0.5"

5 Year Warranty

User Selectable Patterns:

Pattern 0: Four Flashes then Solid  (Incandescent or LED)

Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)

Pattern 2: Seven Flashes then Solid (Incandescent or LED)

Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)

Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe (LED Only)

Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat (LED Only)

Pattern 6: Custom LED Blaster X Cycle for 3 seconds, then Solid (LED Only)

Pattern 7: Custom LED Blaster X Cycle, Repeat (LED Only)

Pattern 8: Max Strobe 4 Seconds, Solid (LED Only)

Pattern 9: Constant Max Strobe Pattern (LED Only)

Note: Although this device has been designed to significantly increase your braking visibility,
flash/strobe patterns may not be street legal.

 

Metric/Universal GEN2 Magic Brake Light Flasher
Fits:  Universal

Installation Instructions

 Item: MAGIC-STROBES-UNV
Price:  $59.95
Quantity

 

 Custom Dynamics® SMART Triple Play®

This module triples your visibility in the rear.

SMART Triple Play® Features

- Converts Rear Turn Signals to Run-Brake-Turn

- Works with LEDs or Incandescent Bulbs

- Choice of 10 User Selectable Built In Brake Light Strobe/Flash Patterns (User can also select no Strobe/Flash on Brake)

Pattern 0: Four Flashes then Solid  (Incandescent or LED)
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)
Pattern 2: Seven Flashes then Solid (Incandescent or LED)
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe (LED Only)
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat (LED Only)
Pattern 6: Custom LED Blaster X Cycle for 3 seconds, then Solid (LED Only)
Pattern 7: Custom LED Blaster X Cycle, Repeat (LED Only)
Pattern 8: Max Strobe 4 Seconds, Solid (LED Only)
Pattern 9: Constant Max Strobe Pattern (LED Only)

- Ability to apply Brake Strobe/Flash Patterns on Center Taillight only,  Rear Turns Only, or Rear Turns & Center Taillight

- SMART Function - If Brake Strobe/Flash is Turned On,  Strobe/Flashing will be paused on Turn Signal if Simultaneous Braking and Turning

- 10 User Selectable Running Light Intensities Allow User to Match the Running Light Brightness of Turns to Center Taillight

- Built In Short Circuit Protection

- Sealed, Weather Tight  Case

- Slim Line Design: 4.2" x  1.4"  x  0.6"

- 5 Year Warranty

- Power By

 

 

 

** The use of this product requires a Signal Stabilizer or Load Equalizer. (2011-2012 Softails and 2012 Dynas do NOT require a Signal Stabilizer or Load Equalizer)

If the bike is equipped with an alarm AND a Signal Stabilizer is not used, an Alarm Friendly Load Equalizer is Required.

Does Not fit 2015 Raider and Stryker

Fits: 12VDC Motorcycles with 2 Rear Turn Signals
Price: $89.95
Quantity

Magical Wizard Lights
 
With TruMAGIC
 
One Bike, One Set of Wizards, Thousands of  Incredible Colors
 


Magical Wizard Kits and Individual Products
- Lifetime Warranty on all LEDs
- No Cutting of Strips, A perfect Clean Install
- Satisfaction Guaranteed
- Unmatched LED Performance
Magical Wizards

 


 

By Custom Dynamics®

Features:

48" Color Coded Wire in High Temp Protective Black Sheathing

 Pre-taped with 3M Tape

Extremely Versatile & Flexible

High Output Surface Mount LEDs

Lifetime LED Illumination Warranty

120 Degree Viewing Angle

Conformal Coated for 100% Waterproof

LED Colors: Red, Blue, Green, Orange, Purple, White, Pink, Amber

Available in a 3 LED (1.5"), 6 LED (3"), 18 LED (9"), and 24 LED (12") version. 

Compact Size: .25" Width x .10" Height

MagicFLEX



TruWRAPZ® LED Turn Signals

Flex LED Turn Signals Wraps

Flexible LED lighting
(click image for larger picture)

Finally a simple, easy to install full function LED fork wrap-around that can be installed in approximately 30 minutes or less. TruWRAPZ® are our amazing, easy to install LED turn signals that feature all of the TruFLEX® advantages plus our Patent Pending Eclipze2® module.

- Dual Intensity running and turn signal Genesis® LEDs or connect as Turn Signal Only for European Use.

- Amber LEDs, with Choice of Clear, Amber, or Smoke Tube.

- LEDs function with 4 ways hazards and alarms when bike is on or off.

- Simple to install, just clean surface with enclosed 3M Primer, peel liner from 3M tape, and wrap around your forks.

- Includes 6 Posi-Taps for simple tap-in installation or solder connectors with enclosed adhesive lined heat shrink tubing.

- Includes Stainless Steel Wire Loom and Chrome Tie Wraps for a professional clean installation.

TruWRAPZ® are 0.34" Wide X 0.30" High

Installation Instructions

Does Not fit 2015 Raider and Stryker

 

TruWRAPZ® for 41mm Forks

Item: TW41
Price:
$99.95/pair

Quantity



Roadliner/Stratoliner/Raider Stealth Big Air Kit

Flow bench designed velocity stacks reduce turbulence and increases air loading

Increases horsepower by 10-12%

Increases torque by 8-10%

Quickens acceleration and attains speed more rapidly

Stronger pulling power rockets you down the road without hesitation

Provides a deeper, healthier roar

System cleanly integrates under the fuel tank and replaces bulky stock air cleaner

High-quality reusable high-flow filters for long life are included

Also includes a unique relocation mount/hardware to reposition sensors

Comes with easy-to-follow instructions for an easy do-it-yourself installation

Made in the U.S.A.

 

Roadliner/Stratoliner/Raider Stealth Big Air Kit
Fits:  '08-'13 Raider, '06-'13 Roadliner/Stratoliner
Item:
1010-0759
MSRP:
$249.95   Price: $232.45
Quantity

 

Slam Kit

Lowering kit and spring combo

Includes a heavy duty spring and lowering kit

Made in the U.S.A.

Slam Kit
Fits:  '08-'14 Raider
Item:
1304-0462
MSRP:
$159.95   Price: $148.75
Quantity

 

Big Radius 2-Into-1 Exhaust

 

Vance & Hines changes the way you look at 2-into-1 exhaust systems

Traditionally viewed as the kind of pipe merely designed for performance, Big Radius 2-into-1 breaks the mold

System delivers white-knuckle performance with style that has won over the motorcycle aftermarket

Incorporates blue-proof technology across the entire length of the pipe to keep its showroom finish whether
at the dragstrip or on the boulevard

Includes mounts for factory O² sensors

Slash Cut End Cap

Made in the U.S.A.

California Warning: The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. Check your local laws and manufacturer's information

Big Radius 2-into-1 Exhaust
Fits:  '08-'13 Raider
Item: 1810-1432
MSRP:
$724.95   Price: $674.20
Quantity

 

STACKEDD or CURVEDD Exhaust Systems

Beautiful looks, beautiful sound

21/4" o.d. exhaust pipes have .083" wall tubing and .049" heat shields

Removable baffles

Raider exhaust systems have O² sensor mount

All necessary installation hardware included

Systems can use Baron Family Jewel exhaust tips

Made in the U.S.A.

California Warning: The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. Check your local laws and manufacturer's information

 

CURVEDD -Slash Cut -Black Ceramic Finish
Fits: 2008-2013 XV1900C Raider

Item: 1810-2160
MSRP:
$749.95   Price: $697.45
Quantity
CURVEDD -Slash Cut -Chrome
Fits: 2008-2013 XV1900C Raider

Item: 1810-1578
MSRP:
$699.95   Price: $650.95
Quantity
CURVEDD-Black Ceramic Finish
Fits: 2008-2013 XV1900C Raider

Item: 1810-2161

MSRP:
$749.95   Price: $697.45
Quantity
CURVEDD -Chrome
Fits: 2008-2013 XV1900C Raider

Item: 1810-1577

MSRP:
$699.95   Price: $650.95
Quantity

 

Freeway Bar

Offer a sportier look than traditional freeway bars

Large radius curves

Made from 11/4" steel

Triple-chrome-plated for superior fit and finish

Made in the U.S.A.

Freeway Bar
Fits: 2008-2014 XV1900C Raider

Item: 0505-0686
MSRP:
$199.95   Price: $179.95
Quantity

 

Tri-Pro 2-into-1 Exhaust

High-performance exhaust system with a unique tri-oval muffler body

One-of-a-kind collector heat shield

Proprietary baffles boost performance while keeping sound levels low

Billet tri-oval tip with dual outlets and a chrome finish

Available with a chrome or black finish heat shield

Made in the U.S.A.

Tri-Pro 2-into-1 Exhaust System-Chrome
Fits: '08-'14 Raider
Item: 1810-1988
MSRP:
$689.95   Price: $620.96
Quantity
Tri-Pro 2-into-1 Exhaust System-Black
Fits: 2008-2014 XV1900C Raider

Item: 1810-1989
MSRP:
$789.95   Price: $710.96
Quantity

 

Drive Belt Guards

Fabricated from a single piece of high-strength steel

Laser cut and formed polished design

Polished and chromed for a custom shine

Made in the U.S.A.

Drive Belt Guard
Fits: '08-'14 Raider
Item: 1303-0105
MSRP:
$69.95   Price: $62.96
Quantity

 

Luggage Rack

Designed to use without a backrest

Formed design is fabricated from solid-plate steel

All are polished and chromed to a mirror-like finish

Made in the U.S.A.

Luggage Rack
Fits: 2008-2014 XV1900C Raider

Item: 1510-0124
MSRP:
$139.95   Price: $125.96
Quantity

 

Rear Shock Drop Bracket Lowering Kit

 

Quickly and easily give your bike that low-down custom look

Kits include brackets and all necessary hardware for a complete installation

Made in the U.S.A.

Rear Shock Bracket Lowering Kit
Fits: '08-'13 Raider
Item: 1304-0223
MSRP:
$95.95   Price: $88.30
Quantity

 

FI2000r 02 Fuel Processor

The Fi2000 O² digital fuel processor is designed to work with all exhaust systems (stock or aftermarket)
equipped with oxygen sensors in place (closed-loop design)

The Fi2000 increases horsepower and torque by optimizing stock lean air/fuel mixtures and helps cool
the engine temps as well

No confusing computer downloads to install

No expensive dyno testing required

Pre-configured from the factory for your make and model, but easy to adjust should your
specific application need it

Fi2000 O² Digital Fuel Processor-C/L
Fits: '08-'14 Raider
Item: 1020-0636
MSRP:
$279.95   Price: $251.96
Quantity
Fi2000 O² Digital Fuel Processor-C/L-ARB
Fits: '08-'14 Raider
Item: 1020-0637
MSRP:
$279.95   Price: $251.96
Quantity

 

Bungee Knobs

Functional yet elegant knobs provide quick attachment points for bungee hooks

Triple-chromed steel polished to a high gloss

Come with all hardware needed for installation

Made in the U.S.A.

Bungee Knobs
Fits: 2008-2014 XV1900C Raider

Item: 1510-0108
MSRP:
$59.95   Price: $53.96
Quantity



Drop-In Front Fork Lowering System

 

Transforms a time-consuming installation process into a quick and simple job

Lowers front end of your bike up to 2" without disassembling the forks

Entire procedure can be accomplished with basic tools

Made in the U.S.A.

Drop-In Front Fork Lowering System
Fits: 2008-2009 XV1900C Raider

Item: 0416-0054
MSRP:
$129.95   Price: $120.85
Quantity

 

Fatty Freeway Bars

Stylish update to traditional cruiser look with improved functionality

CNC-machined chrome-plated mild steel for durability

Custom-fit to each model for hassle-free installation

Work with all Cobra accessories including lightbars and floorboards

Larger 1 1/2" dia. tubing

Made in the U.S.A.

Fatty Freeway Bars
Fits: 2006-2014 XV1900C Raider

Item: 0505-0679
MSRP:
$219.95   Price: $197.96
Quantity

 

Dragster

Perfect update to traditional drag pipes; maintains clean, pure drag-pipe appearance

Full-length, 2.5" heat shields with a 222° wraparound for a non-blueing appearance

Capped with machined and chromed billet tips

Simple installation

Repl. baffle PART #1861-0405 measures 1.875" x 14.5"

Repl. baffle PART #1861-0488 measures 1.75" x 14.5"

Made in the U.S.A.

Dragster Exhaust
Fits: '08-'14 Raider
Item: 1810-1370
MSRP:
$499.95   Price: $449.95
Quantity


Speedster Swept Exhaust

 

Curved lines of the exhaust pipes echo the sweeping top line of motorcycles

Deep rumbling sound for a touch of attention

Includes Cobra PowerPort for increased low and mid-range power

Includes 13/4" head pipes and full-length 23/4" heat shields to give the pipes the correct proportional look; heat shields will not discolor

Removable power cores

Available with chrome or black finish

Made in the U.S.A.

California Warning: The California Air Resources Board (“CARB”) does not permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. Check your local laws and manufacturer's information.

 
Speedster Swept Exhaust - Chrome
Fits: '08-'14 Raider
Item: 1810-1514
MSRP:
$699.95   Price: $629.95
Quantity
Speedster Swept Exhaust - Black
Fits: '08-'14 Raider
Item: 1810-1866
MSRP:
$799.95   Price: $719.96
Quantity


465 Series Shocks

High-pressure gas monotube design for the ultimate performance

Five-position rebound adjustment to tailor the suspension for changing conditions and riding styles

Threaded shock body with a wide range of adjustment to fine-tune preload and sag

Hard anodized aluminum body and components for excellent durability and corrosion resistance

46mm bore and deflective disc piston provides precise damping

16mm hard chrome shaft rides on custom viton seals for low friction and leak-free reliability

Each shock is custom tuned (damping and spring rate) for each fitment

Some applications are available with Remote Adjustable Preload (RAP). This option features a remote hydraulic adjuster to make it even easier to fine-tune your suspension for different loads, such as passengers or luggage

Made in the U.S.A.

NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact.

 
465 Series Shocks W/RAP
Fits: 2008-2012 XV1900C Raider

Item: 1310-0689
MSRP:
$744.95   Price: $692.80
Quantity
465 Series Shocks-Black /Anodized Aluminum
Fits: 2008-2012 XV1900C Raider

Item: 1310-0625
MSRP:
$494.95   Price: $460.30
Quantity
465 Series Shocks-1" Lower
Fits: 2008-2012 XV1900C Raider

Item: 1310-0626
MSRP:
$494.95   Price: $460.30
Quantity


 

FuelPak

 

Throttle-position, sensor-based system simplifies the process of fuel-injection tuning

Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button

Increases power and improves throttle response

Very user friendly; plugs into the existing harness on the bike

No computer or software is required; simply punch in the values supplied with the Fuelpak

Values supplied are for use with Vance & Hines exhaust systems

Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information)

Includes all necessary mounting hardware

NOTE: Requires the use of a high-performance air filter.
NOTE: Not legal for sale or use on pollution-controlled vehicles.

 

FuelPak
Fits: '08-'10 Raider
Item: 1020-0615
MSRP:
$289.95   Price: $269.65
Quantity


Lightbar With Spotlights

 

Add visibility for safety, style to turn heads

Spotlights come pre-installed on lightbar - just buy it, bolt it on and plug it in

Accept stock turn signals

Style A: Square-cornered bar with shallow spotlights and turn signals down

Style B: Straight bar with Bullet spotlights and turn signals out

Style C: Angled bar with Bullet spotlights and turn signals out

Style D: Square bar with Bullet spotlights and turn signals down

Style E: V-shaped bar with Bullet spotlights

Style F: V-shaped bar with 3" spotlights; visors included

Visors for spotlights and OEM headlights available separately

Made in the U.S.A.

NOTE: Lightbars are designed for fitment on stock motorcycles. Installation of a windscreen may cause clearance problems.

 
Lightbar w/Spotlights
Fits: 2008-2014 XV1900C Raider

Item: 2001-0422
MSRP:
$299.95   Price: $269.96
Quantity



Swept Floorboard Kit

Custom-look swept design will make any bike stand out in a crowd

Quick and painless installation - all kits bolt right on

More leg room

Outstanding vibration isolation

Classic American looks

Front kits are chrome-plated stamped steel

Rear kits, available for many models, are CNC-machined from solid billet aluminum

Made in the U.S.A.

Swept Floorboard Kit
Fits: '08-'14 VX1900/S Raider

Item: 1621-0114
MSRP:
$314.95   Price: $283.46
Quantity

 

 

 

Customer Service
M-TH 8:30am 5:30pm
Fri 9:30am 5:30pm
Closed Noon 1:00pm
 
 
Address:
15 Cypress Drive
Youngsville, NC 27596
 

 

Email Newsletter icon, E-mail Newsletter icon, Email List icon, E-mail List icon Sign up for our Monthly Email Newsletter

 
 

                 

All Content Copyright © 2003-2015 Custom Dynamics®