Global Rating: 4.89 from 9 reviews.
Add your own review for this product
| rating | title | date | name | city state/province country |
|---|---|---|---|---|
|
Nice Look, great finish (5/5) | Sep 21, 2007 | Bill | Virginia BEach VA |
|
I really liked the effect this had on my bike (Suzi C50) Installed with minimal issues aside from me breaking wire insulation when I attached it to my plate holder and caused a hidden short on the brake side to ground (my fault, not the products) The chrome finish seems to be of high quality and the plate cover is a thick heavy metal base. Leads were plenty long at 3 feet. Sequencers work smoothly and do not look choppy even during transitions from solid brake back to knight rider mode. Installation note: Be certian you identify ground accurately, I used a meter (continuity tester) and forgot that the Turn signals will show ground through the filaments and hooked up to my Turn wire at first. I later just attached ground directly to the chassis for simplicity and ease of wiring. Required modifications: I had to snip a v-notch in my actual license plate to allow the wires to feed behind the plate. They are wrapped out of the box at this location and protected from shorting. |
||||
|
Knight Rider Rocks (5/5) | May 5, 2010 | Doc | St. Charles IL US |
| Installed this on my 1998 Springer. So much more visible from behind now. Lights are bright day or night and the motion is a real attention grabber. Great looks, quality chrome frame, reasonable price, easy install. | ||||
|
nice touch (5/5) | Mar 16, 2009 | Mike Chunn | Philadelphia MS US |
| Very nice touch to the back of any bike. I have these installed on 3 bikes now. The chrome finish is deep and has the look of a chrome plate frame costing 3 times as much. Really an attention getter for the back of any bike. This even comes with heavy chromed mounting hardware. Great addition and highly recommended. | ||||
|
Quality product (5/5) | Nov 20, 2009 | Anonymous | Fremont CA US |
| I've had this on for months now and I am very happy with it. Solid and high quality materials. I feel much safer with this on. I am sure I am much more visable and the sequential light makes it much more so. Blends in well with my bike. | ||||
|
Knight Riderz (5/5) | May 3, 2010 | Mike Goddard | Dothan Al US |
| Went onto my custom mount super easy and wiring was no problem at all !! Makes the rear of my 750 Spirit look Much better !! | ||||
|
nice (5/5) | Jul 28, 2009 | Angela | Browns mills NJ |
| Very nice chrome. Good solid frame and it really helps to light up the back of the cruiser. | ||||
|
Good frame and light (4/5) | Aug 31, 2007 | Hypurr | Baton Rouge LA US |
| The frame is very heavy duty and the mounting hardware is top notch. The LEDs are bright and work well. They don't flash as fast as I would have thought. It is more like a slow blink. Overall a good product. | ||||
|
Nice easy add on (5/5) | Sep 3, 2010 | joe bologna | azle tx US |
|
Installed this on my 2005 Suzuki Boulevard C-50. I've been wanting to add an extra light of some sort cause I ride mine pretty much 90% of the time all year round to work in the day home in the dark. Was fairly easy to installed did take about 1-1/2 hours for my C-50 I drilled a small hole for the wire through the plate straight into the fender to the inside then zip tied it to the existing wiring, ran it under the seat cut about a 1/2" of the wiring sheild off the 2 wires I needed, stripped about 3/4" off the wire twisted it around the wires I had exposed off the bike then added a dab of solder to secure the connection and wrapped them up with tape. |
||||
|
Ride the light! (5/5) | Feb 27, 2011 | Alan Moshiri | Apache Junction AZ US |
| I added this to my FZ1000 where my oem plate had already snapped off and my swing arm mount had done likewise after about a year. It took about two hours because I had to custom fit and bend two steel brackets from the frame to the fender and then drill through to mount the very solid plate holder. I chose black to minimize the occasional chain lube tossed up. When finished I was amazed at how much brighter these LEDs are than my taillight also LED. Another nice touch is that the back off flash is out of sync with the taillight and it appears to bounce up and down. I ride rush hour every day in PHX and it's quite dark so I love the way people seem to back off and give me a little more space. With this on my rear and HID headlights I rule the nights now. Highly recommended! | ||||