Brake Light Signal Module

Maximize your Brake Light Effectiveness with BackOFF. This compact solid state electronic module converts your ordinary brake light into an attention getting visual alerting device, creating more visibility and conspicuity when you are stopped or stopping. With BackOFF-MC installed, when you apply your brakes, it causes your brake light to automatically emit a visual alerting signal of 3 short light flashes, followed by 1 steady on light condition of 3.5 seconds. This signal automatically repeats itself as long as the brakes are applied. This pattern is not random, but has been selected because of its ability to gain and retain following drivers attention.

Most states drivers handbooks recommend that you flash your brakes when slowing or stopping. The BackOFF-MC automatically facilitates compliance and enhances safety. Install the BackOFF-MC and see how much more effective your brake light can be.
 

Features:
Easy Installation. - Simply install the BackOFF-MC module in line with your brake light wire between your brake light switch and your brake light.
Large power capacity: - 12 volts DC, Maximum Capacity 10 Amps!
Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H
Sealed Weather Resistant heat sink case.
Limited Warranty - One Year!

(note: will not work with LED Taillights)

Note: This module causes the light out indicator to stay illuminated on most BMW motorcycles, and the cruise control not to engage on 2002 and later Harley Davidsons

Installation Instructions

 

Backoff Module

Item: 01001

MSRP: $34.95  Price: $31.45

Quantity

Create more visibility and conspicuity when you are stopped or stopping when you install the BackOFF-XP™.

This compact solid state electronic module converts your ordinary brake lights into your choice of two attention getting visual alerting signals when you apply your brakes:

User Selected Mode One:
Emit a visual signal of 3 short light flashes, followed by 1 long light flash (3.5 seconds). The signal automatically repeats itself as long as the brakes are applied. This pattern is not random, but has been selected because of its ability to retain following drivers attention.

User Selected Mode Two:
Emit a visual signal of 5 short flashes, followed by a steady on light that remains steady on as long as the brakes are applied.
 

Features:
Easy Installation. - Simply install the BackOFF-XP™ Module in line with the brake light wire leading to the brake light and connect a ground wire.
Large power capacity: - 12 volts DC, Maximum Capacity 10 Amps!
Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H
Sealed Weather Resistant heat sink case.
Limited Warranty - One Year!

(note: will work with LED or Incandescent Bulbs)

Installation Instructions

Backoff XP Module

Item: 01004

MSRP: $39.95  Price: $35.95

Quantity

.

For Use With Bikes With
TWIN Brake Lights!

NOTE: This module is designed for use with motorcycle's equipped with two brake lights located side-by-side. Do not install this signal module into a car or truck's brake light or turn signal system as it could interfere with the proper operation of those systems or cause confusion to following drivers.

--------------------------------------------------------------------------------

Create more visibility and conspicuity when you are stopped or stopping when you install the BackOFF-Wig Wag™ Module.

This compact solid state electronic module converts your ordinary brake lights into your choice of two attention getting visual alerting signals:

User Selected Mode One:
Emits 4 alternating quick flashes of the left and right brake lights, followed by 3 short flashes and 1 long flash (3.5 seconds) of both brakes lights. The 3 short flashes and 1 long flash pattern automatically repeats itself as long as the brakes are held.

User Selected Mode Two:
Emits a visual signal of 4 alternating quick flashes of the left and right brake lights, followed by 3 short flashes of both brake lights and then the brake light remains steady until the brake is released.


Features:
Easy Installation. - Simply install the BackOFF-Wig Wag™ Module in line with the brake light wire leading to the brake light and connect a ground wire.
Large power capacity: - 12 volts DC, Maximum Capacity 10 Amps!
Compact size. - 2-1/4"L x 1-5/8"W x 5/8"H
Sealed Weather Resistant heat sink case.
Limited Warranty - One Year!

(note: will work with LED or Incandescent Bulbs)

Installation Instructions

Item: 01009

MSRP: $39.95  Price: $35.95

Quantity