Thanks for stopping by Custom Dynamics. Sit back, relax
and take your time there's a great deal to see!
 

If you have any questions at all, please feel free to drop us an E-Mail or call us
TOLL-FREE:  800-382-1388
(Local/International: 919-554-0949)

 

V-Twin, Chopper, Sportbike or Metric Cruiser, there's literally EVERYTHING To Light Up Your Ride!

 
 
Look for New Genesis LED Technology - 30% - 50% Brighter LEDs - Guaranteed

Victory Kingpin LED Turn Signals & Accessories

Victory Kingpin Tokerz LED Turn Signals

    

 

by MBW Motorcycle Products
 
We've completed the re-design of our Kingpin front and rear turn signal assemblies.  The fronts now feature a highly polished low profile aluminum clamp that compliments both the design of the Kingpin and features a smaller yet more intense high output LED turn signal and blind mounting hardware.  Amber LEDs (only) are available for the front and both Red and Amber LEDs are available for the rear

Note: Universal Flasher is required on 2004 Kingpins to correct flash rate.

Note: A Load Equalizer  will be need to maintain stock flash rate on 2005 and newer Kingpins when both front and rear turn signals are replaced with LEDs, only one load equalizer is needed for Victory Motorcycle with self canceling turn signals. 

These products are not DOT approved. Use at your own risk, we are not responsible for any damages or losses incurred while using our products.

Use of these products may be limited, regulated or prohibited in your state, please check all applicable motor vehicle code and laws before ordering.

MBW Warranty & Returns

Item #: KP-F102A
 Victory Kingpin Front Amber LED Turn Signal Kit - Amber Lens
Price: $259.95 pair
Quantity

 

Item# KP-R101R
Victor Kingpin Rear Red LED Turn Signal Kit - Red Lens
Price: $219.95 pair
Quantity
 
Item# KP-R101A
Victor Kingpin Rear Amber LED Turn Signal Kit - Amber Lens
Price: $219.95 pair
Quantity

Victory Kingpin Bullet Turn Signals

by Signal Dynamics

Unique Dual Function Brightness LED's - Can be operated in low or high intensity brightness
Quality Finish - Marine Grade brilliant Mirror Chrome with a super tough poly-carbonate lens.
Dimensions: - 2.25" Diameter - 3.33" Long.
Low Power Requirements - 12V DC, 1/4 Amp!
Three wire installation Black - Ground, Blue - Running Lights - Violet - High intensity (Turn Signals)

The purchase of a Load Equalizer is required to maintain the stock flash rate and use of the four-way flashers.
 
Note: Many of the newer Victory Motorcycles have the front right turn signal wired backwards, please check polarity with a voltmeter prior to installation!

 

Item# VKSD01 (02512/02402)
Victory Kingpin AMBER LED Front Turn Signal Kit
Dual Intensity
MSRP: $149.95  Price: $142.00 (pair)
Quantity

Billet Wrap-around LED Fork Clamps

Click Here for More Information on Billet Wrap-around LED Fork Clamp Turn Signals

Eclipze Module
 
A new way to convert your single intensity LEDs to Dual Intensity with the advantage of 100% ON Running Lights and a Full Contrast Turn Signal Flash. Works with any size LED up to 300mA per side. Recommend for All Front Turn Signal Applications and for Red Rear Turn Signal Applications.
 

 (Click on Eclipze Logo for More Information)

 
Eclipze Module 
Item: EPZ
Price: $24.95 Pair
Quantity

Victory Motorcycles Chrome Covers

Victory Script 09160

Victory Bar 09162

Victory Bullet 09163

Victory Hammer 09164

Victory Jackpot 09165

Victory Vegas 09167

Victory V-Block 09169

8 Ball Black Chrome 09168

Victory Kingpin 09166

 

 

Click Here for Victory Oil Cooler and Brake Chrome Covers

*********************************************************

Victory Billet Chrome Air Box Cover

Click Here for Victory Billet Airbox Cover

Victory Brake Light Strobe/Flasher

Click Here for more Information on the Victory Brake Light Module

Victory Lowering Kit

Click Here for more Information on Victory Lowering Kits

Victory Custom Grips

Victory Custom Grips

Victory Thermo Dipstick

Click Here for more Information on Victory Thermo Dipstick

Lloyds High Compression Pistons & Rings

Click Here for more Information on Lloyds High Compression Pistons

PMRT Air Intake System

Click Here for more Information on the PMRT Air Intake System

Digital Guard Dawg

Personal Recognition System

Click Here for More Information on the Digital Guard Dawg

Victory Kingpin Front LED Silver Bullet Turn Signals

Victory Kingpin Front LED Turn Signal Assemblies

 

 Our bracket style is made from highly polished aluminum (you’ll swear it’s chrome) and uses 15 of the highest quality amber  LEDs per side, and directly bolts on to the headlight bucket mounting bolt.  It’s designed to fill in and clean up underneath the triple tree and fits up close to the brake line distribution block. All  turn signals use the stock wiring harness.  Load equalizer is required to maintain stock flash rate when using both our front and rear LED turn signal assemblies together.

 
Kingpin Front Bracket-Style LED Turn Signal Assembly
Item: KH-F001B
Price: $189.95
Quantity

 
New Black Anodized Finish
Kingpin Front Bracket-Style LED Turn Signal Assembly
Item: KH-F001B-BL
Price: $189.95
Quantity

Kingpin Front Wrap-Around Style LED Turn Signal Assembly


 

Victory Kingpin Front LED Turn 360 Degree LED Wrap
Item: HF-002W
MSRP: $129.95 pair
Quantity

Victory Kingpin Radius Laydown License Plate Frame

      

 

Undeniably the trickest product made for the Kingpin, and an awesome compliment to our matching front and rear turn signals; our Kingpin Radius Laydown Plate picks up where other designs have left off.  Slammed to the fender, its curved design closely follows the contour of the fender while maintaining maximum visibility.  Made from CNC machined and triple chrome plated billet aluminum, the  two piece design is made up of  a mounting block that bolts to the fender using the stock hole locations (and rubber gasket) and a blind plate design with no external hardware for an incredibly clean look. 90 degree LEDs illuminate the entire width of the plate and cast a white glow.  Slight trimming of standard size plates (4x7) may be required (or photocopy of license plate can be used, check local regulations before ordering.) 
 
Kingpin Radius Plate Frame
Item: KPL-301
MSRP: $389.95
Quantity

Victory Sidemount License Plate Bracket

Radius Sidemount

We’re proud to announce our latest, totally custom, unique and original product for the Vegas, Kingpin, Hammer, and Jackpot...our all new radius sidemount!
This sidemount features an integrated HID-like plate illumination. This is an awesome compliment to our custom rear LED turn signal assembly . Minor plate trimming may be necessary for some states.
Fits: All 2003 and Newer Victory Vegas & Kingpin; & 2007 and Newer Hammer and Jackpots with painted swing arms and recessed oval shaped belt tension washer.
Available in Chrome and Black Anodized.
 
 
Radius Vertical Sidemount License Plate Bracket
Item: HS-307
Price: $389.95
Quantity

 Radius Vertical Sidemount License Plate Bracket (Black Anodized)
Item: HS-307BL
Price: $389.95
Quantity

Victory Kingpin Radius Primary Sidemount

We’re proud to announce our latest, totally custom, unique and original product for the Vegas,  Kingpin, Jackpot, and Hammer.... new radius primary sidemount!

Designed to seamlessly follow the shape and flow of the primary, our sidemount features an integrated HID-like plate illumination.  This is an awesome compliment to our custom Hammer rear LED turn signal assembly. Minor plate trimming may be necessary.

Available in Chrome or Black Power Coat
Chrome Primary Radius Sidemount
Fits: '03 and Up Vegas, '04 and Up Kingpin, '05 & Up Hammer, '06 & Up Jackpots
Item: PS-201
Price: $389.95
Quantity

Black Primary Radius Sidemount
Fits all '06 & '07 Vegas/Kingpin/Jackpots, and '05-'07 Hammers.
Item: PS-201BL
Price: $389.95
 
Quantity

Standard Sidemounts

Our all new sidemounts for Victory Motorcycles fit the Vegas, Kingpin and V92C, and feature an integrated belt tensioning gauge that takes the place of the stock washer.

Made of 3/16ths steel and triple chrome plated for a show finish, these sidemounts are incredibly sturdy and an excellent compliment to the New American Motorcycle Company’s cruisers.  Installation is a direct bolt-on, V92C owners need to remove the rear brake line clamp or substitute the bolt with a lower profile one.  Available in both horizontal and vertical configurations, these brackets also feature ball mill detailing on the back for a custom finishing touch and compliment to a wide variety of available aftermarket and factory parts.

These Side mounts are designed to work with any 4" x 7" License Plate Frame and our LED License Plate Illuminators.

Vertical Mount

Fits: 2003 and Newer Victory Vegas and Kingpin

V92C owners need to remove the rear brake line clamp or substitute the bolt with a lower profile one.

Installation Instructions
Victory Vertical Sidemount License Plate Bracket
Item: VS-001
Price: $199.95
Quantity

Standard Sidemount - Black Powder Coat

Now available for 8-Ball owners or anyone else going for the blacked out look, our standard Victory sidemount in black powder coat!

Fits: 2003 and Newer Victory Vegas and Kingpin
Victory Vertical Sidemount License Plate Bracket
Item: VS-001BL
Price: $169.95
Quantity

Horizontal Mount

Fits: 2003 and Newer Victory Vegas and Kingpin
Victory  Horizontal Sidemount License Plate Bracket
Item: VS-002
 Price: $199.95
Quantity

Acceptance Mark
Online Payment Service
 
 
  
Copyright Notice:  Copyright © 2003-2008 Custom Dynamics® LLC. All rights reserved.
The images and other content contained in this web site are the property of and copyrighted by Custom Dynamics® LLC. Downloading of images for personal use only is permitted. Downloading of images or text for commercial use without the written consent of Custom Dynamics® LLC is strictly forbidden. Custom Dynamics® and the Custom Dynamics® logo are registered trademarks of Custom Dynamics® LLC