Holiday Gift Ideas & Seasonal Items

 

 Thanksgiving Special:  Free UPS Ground Shipping On Orders Over $50 (U.S. Only)

Victory Vision Audio Products

by J&M Corporation

Fairing Speaker Upgrade Kit
 for 2008 Victory® Vision

Our wide fidelity fairing speaker upgrades for the 2008 Victory® Vision will allow the volume to be adjusted to maximum at highway speeds, without distortion.

They feature the same exact dimension mounting hole pattern and electrical spade lug size/polarity as the stock speakers, to make installation a snap.

Rated at 2 ohms impedance (2.6 ohms actual) and 140 watts max power, they feature a very thin, hard, injection molded polycarbonate cone, titanium colored dust cover, super flexible rolled edge, high sensitivity voice coil and high flux strength Neodymium magnet structure, to provide for maximum air movement, along with superior response.

You will be impressed by the significant improvement in volume and sound quality while riding your Vision.
(sold in pairs)

Rear Speaker Upgrade Kit for 2008 Victory® Vision

Our wide fidelity rear speaker upgrades for the 2008 Victory® Vision will allow the volume to be adjusted to maximum at highway speeds, without distortion.

They feature the same exact dimension mounting hole pattern and electrical spade lug size/polarity as the stock speakers, to make installation a snap.

Rated at 2 ohms impedance (2.6 ohms actual) and 140 watts max power, they feature a very thin, hard, injection molded polycarbonate cone, titanium colored dust cover, super flexible rolled edge, high sensitivity voice coil and high flux strength Neodymium magnet structure, to provide for maximum air movement, along with superior response.

You will be impressed by the significant improvement in volume and sound quality while riding your Vision.
 (sold in pairs)

1’ CB Antenna Staff kit for 2008 Victory® Vision

This top loaded 1’ CB antenna staff replacement is easy to install and an antenna mounting-nut cover is included for a cleaner look when you are finished.

Packaged individually with complete SWR tuning instructions.

Z-series Lower-Section 8-pin Hook-Up cord for 2008 Victory® Vision 7-pin system

This heavy-duty Z-Series 8-pin lower-section hook-up cord is to be used with all J&M® Elite Series headset #’s HS-ECD584, HS-ICD584, HS-ECD477, HS-ICD477, HS-ECD374, HS-ECD271 and HS-ECD269 for connection to the 2008 Victory® Vision audio system.

P-series Lower-Section 8-pin Hook-Up cord for 2008 Victory® Vision 7-pin system

This new economical P-Series 8-pin lower-section hook-up cord is to be used with all J&M headset series #’s HS-ICD284, HS-BCD277, HS-ICD277, HS-BCD257, HS-BCD174, HS-ICD174 and #HS-CD9174 series helmet headsets, for connection to the 2008 Victory® Vision 7-pin audio systems.