This is an integrated LED PLUG AND PLAY tail light for the stock 2004-2006 YZF-R1. Includes a NEW ultra enclosed tail-light with plug and play wiring harness (the new lenses' CLARITY is INSANE) with a ultra high-tech Custom LED circuit board containing 32 Ultra Bright Red LEDs and 32 Ultra Bright Yellow LEDs - compared to only 12 red LEDs on the stock circuit board!

The Custom LED 2004-2006 Yamaha YZF-R1 Integrated LED Tail Light marks the introduction of our new Brake Alert safety feature, and Strobe Mode!

Brake Alert automatically provides three quick pulses of light the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists!

Strobe Mode is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention. This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light. Strobe mode is engaged by grounding a control wire, and can be engaged at any time and overrides all other functions.

Also included is our Blaster-X technology. This technology squeezes the maximum possible illumination power out of LEDs. The result is a significantly less expensive, yet even more outstanding and effective product than it's predecessors - and widens our advantage over our competitors.

Just as on the other Custom LED models, the system is designed so that the red LEDs turn off (on one side) when the yellow comes on so that the turn indication is a pure yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.

The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.

FEATURE OVERVIEW:
 

32 Ultra Bright Red LEDs for running and brake lights.

32 Ultra Bright Yellow LEDs for turn signals.

Custom LED Color Chang Technology on-board.

Custom LED Blaster technology on-board.

Custom LED Strobe Mode!

Custom LED Brake Alert!

4Mhz microprocessor controlled operation

Detailed step by step instructions with illustrations for a simple install.

Smart color matched wires matches motorcycle wires for easy wiring.

Only 3 wires to hook up outside of tail light housing.

All electrical connectors and hardware provided with kit.

24/7 customer support.

2 Year warranty.

MADE IN THE USA!

NOTE: The "BlasterX" effects feature can be activated via a single toggle switch (switch, tape, connectors, and wire included in our Custom Dynamics exclusive package)