GEN-200-AR2-U

2.0" Dynamic Cluster™ LED Turn Signals

RUN, BRAKE, TURN FUNCTIONALITY

Rear LED turn signal OEM replacement made with 48 5mm LEDs per unit. Our popular Dynamic Clusters2™ allow the outer ring of 24 red LEDs to function as a running and brake light and 24 center amber LEDs to function as the turn signal. Bulb base will plug into turn signal socket with two extended wires to access running light and brake light power. Lifetime Warranty against LED failure. Sold as Pair.

This Item is NOT plug and play and requires two wires to be routed through the turn signal housing and connected to the running light and brake light power. Reference installation instructions below

Direct replacement for rear turn signals on Harley-Davidson® and Yamaha motorcycles with 1156/7507 single contact bulb bases (Models with center taillight). Add optional trim ring adapters to convert the 2" cluster to "flat style" for secure installation inside 3" housings with 2 screws (required for some Harley-Davidson®  Electra Glide, Ultra and Road King, Yamaha V Star 1100 & 650, Road Star (except Warrior) and 1999 - 2008 Royal Star models). 

Note: These Turn Signals are NOT compatible with any run, brake, turn controller. Confirm rear turn signals operate as turn signal only before installing. 

SMART Signal Stabilizer™ (sold separately) may be required to ensure proper function and flash speed of LED Turn Signals. 

In stock
$89.95
Pair

Prop 65 WarningCA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

48 5mm Genesis® LEDs per unit


24 Red Run/Brake LEDs


24 Inner Amber Turn LEDs


Rear Turn Signals


1156 or 7507 Bulb Base


Bullet or Flat Style


SMART Signal Stabilizer™ may be required


Lifetime LED Warranty


Sold as a Pair

FITMENT

Direct replacement for rear turn signals on Harley-Davidson® and Yamaha motorcycles with 1156/7507 single contact bulb bases (Models with center taillight). Add optional trim ring adapters to convert the 2" cluster to "flat style" for secure installation inside 3" housings with 2 screws (required for some Harley-Davidson®  Electra Glide, Ultra and Road King, Yamaha V Star 1100 & 650, Road Star (except Warrior) and 1999 - 2008 Royal Star models). 

RELATED PRODUCTS

SMART Signal Stabilizer™ (sold separately) may be required to ensure proper function and flash speed of LED Turn Signals. 

Note: These Turn Signals are NOT compatible with any run, brake, turn controller. Confirm rear turn signals operate as turn signal only before installing. 

Alternatively, Custom Dynamics® ProBEAM® Motorcycle LED Turn Signals now utilize automotive grade LEDs to produce an even brighter light output with wider viewing angle. 

Write Your Own Review
You're reviewing:2.0" Dynamic Cluster™ LED Turn Signals
Your Rating