49mm LED Fork Wrap-Arounds™ for H-D™
Billet Fork Wrap-Around™ Turn Signals for 49mm forks. Made from T06061 Billet Aluminum. Available in Gloss Black Annodized or Chrome Finish. Amber LEDs are available with Smoked or Clear Lens and Amber/White LEDs are available with a Smoked lens. SMART Signal Stabilizer™/ Load Equalizer may be required. Lifetime Warranty Against LED Failure. Sold as a Pair.
Amber LED Billet Fork Wrap-Around™ have 30 LEDs per unit and functions as a full contrast turn signal. Convert to Dual Intensity (70% ON Running Lights with Full Contrast Turn Signal) with the Eclipze® Wrap-Around™ Module.
Amber/White LED Billet Fork Wrap-Around™ have 15 Amber and 15 White LEDs per unit giving you 30 LEDs on each Wrap-Around™ and 60 LEDs in total. While the bike is on, the white DRL's stay on. When a turn signal is activated, the White LEDs turn completely off for the entire turn signal cycle providing greater visibility to the amber turn signal.
Eclipze® Wrap-Around™ Turn Signal Converter is required for H-D™ BCM Bikes (2011-Present Softail®, 2012-2017 Dynas®, 2014-Present Touring, 2014-Present Sportsters®) If Front Turn Signals are removed and Amber Wrap-Around™ is installed.
Wrap-Around™ turn signals are a complete unit. These mount by sliding onto the forks and tightening the set screw built into the back of the housing.
*Please confirm size on motorcycle before ordering. Your fork must be the same size as the mm options listed here to ensure proper fitment.
Patents: US D611,187 US D611,177 US D605,345 US D611,178 8,876,331 8,192,061
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
AMBER LEDS WITH CLEAR OR SMOKED LENS
AMBER/WHITE LEDS WITH SMOKED LENS
6000K COLOR TEMP
Black Anodized or Chrome Finish
T06061 Billet Aluminum
SMART SIGNAL STABILIZER™/ LOAD EQUALIZER MAY BE REQUIRED
Lifetime LED Warranty
Sold as a Pair
49mm Forks Including 2006-2017 Dyna® Models (except Switchback®), 2002-2011 V-Rod, Night Rod® & Night Rod® Special (Does not fit Muscle or Street Rod), 2018-2020 Sportster® Forty-Eight® & 2018-2020 Softail® Street Bob®, Low Rider® & Breakout®.
Eclipze® Wrap Around Turn Signal Converter may be required for H-D® BCM Bikes (2011-Present Softail®, 2012-2017 Dynas®, 2014-Present Touring, 2014-Present Sportsters®) If Front Turn Signals are removed
Check out Custom Dynamics® TruBEAM® LED Headlamp with complex reflector design that features three low beam LEDs and two high beam LEDs with a combination of projector and reflector type LEDs and built in halo ring.
HOW TO MEASURE
Use a string to wrap around the fork and mark where the string touches. Using a tape measure, measure the space between the start and end of the fork in millimeters. This measurement is the circumference. To get the diameter, use a calculator and divide the circumference by 3.14. The result is the diameter of your fork.