• Lifetime Warranty
  • DOT Compliant
GEN-4-AR-1156-T

Genesis® 4 Amber/Red 1156 Rear Flat Style LED Motorcycle Turn Signal Inserts

RUN, BRAKE, TURN FUNCTIONALITY

Rear LED turn signal OEM replacement made with 48 LEDs per unit. Our popular Dynamic Clusters™ allow the outer ring of 24 red LEDs to function as a running and brake light and 24 center amber LEDs to function as the turn signal. 1156 bulb base will plug into turn signal socket with two extended wires to access running light and brake light power. BCM Compliant. Lifetime Warranty against LED failure. Sold as Pair.

Plug & Play on 1986-2013 Harley-Davidson® Electra Glide Classic (FLHTC), Electra Glide Standard (FLHT), Electra Glide Ultra Classic (FLHTCU), Ultra Limited (FLHTK), 1986-2020 Road King (FLHR), Road King Classic (FLHRC), 1986-2017 Heritage Classic (FLSTC) and 1999-2003 Road Glide (FLTR) with Flat Style (2 screw) Turn Signal Lenses and 1156 rear single contact bases (Does NOT Fit CVO™ Models). And, 1986-2001 Harley-Davidson® FXS, FXL, FXD, FXR, FDWG, and XL Models with stock OEM Old Bullet Style signals lenses with 2 screws and 1156 rear single contact bases.

This Item is NOT plug and play and requires two wires to be routed through the turn signal housing and connected to the running light and brake light power. Reference installation instructions below (Replaces OEM# 68572-64B). Posi-Tap™ Connectors (sold separately) can be purchased, allowing you to tap into hot leads without cutting or stripping them.

DOT Compliant when used behind Custom Dynamics® smoked or clear motorcycle turn signal lens (sold separately). Also offered for Harley-Davidson® Bullet Style turn signals.

SMART Signal Stabilizer™ (sold separately) is required on 2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models to ensure proper function and flash speed of LED Turn Signals. 


In stock
$89.95
Pair
WARNING: Cancer & Reproductive Harm - www.p65warnings.ca.gov

48 Genesis® 4 LEDs per unit


36" Wire Leads


24 Red Run/Brake LEDs


24 Inner Amber Turn LEDs


Rear Turn Signals


BCM Compliant


SMART Signal Stabilizer™ or Load Equalizer may be required


Lifetime LED Warranty


Sold as a Pair

FITMENT

Plug & Play on 1986-2013 Harley-Davidson® Electra Glide Classic (FLHTC), Electra Glide Standard (FLHT), Electra Glide Ultra Classic (FLHTCU), Ultra Limited (FLHTK), 1986-2020 Road King (FLHR), Road King Classic (FLHRC), 1986-2017 Heritage Classic (FLSTC) and 1999-2003 Road Glide (FLTR) with Flat Style (2 screw) Turn Signal Lenses and 1156 rear single contact bases (Does NOT Fit CVO™ Models). And, 1986-2001 Harley-Davidson® FXS, FXL, FXD, FXR, FDWG, and XL Models with stock OEM Old Bullet Style signals lenses with 2 screws and 1156 rear single contact bases.

2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models require a SMART Signal Stabilizer™ or Load Equalizer to ensure proper function and flash speed of LED Turn Signals. 

SPECIAL NOTES

Dynamic Clusters™ require two wires to be routed through the turn signal housing and connected to running light and brake light power. Reference installation instructions below.

Dynamic Clusters2™ are NOT compatible with our SMART Triple Play® or any Run/Brake/Turn module.

Alternatively, ProBEAM® LED Turn Signals are sold with lenses and offer both solid or halo running light illumination. Shop all Genesis® 4 LED Turn Signals including Solid Amber/White (Halo Free) Front LED Turn Signals and, Solid Red or Red Ring Rear Motorcycle LED Turn Signals!

Write Your Own Review
You're reviewing:Genesis® 4 Amber/Red 1156 Rear Flat Style LED Motorcycle Turn Signal Inserts
Your Rating