TWAWS

Amber/White Dynamic TruWRAPZ®

Easy to install, dual function, LED fork wrap arounds with White DRL Running Lights and Amber LED Turn Signals in a Smoke Tube. Available for 39mm, 41mm, 43mm, 49mm, and 56mm forks. Product includes 6 Posi-Taps™ for simple tap-in installation, Stainless Steel Wire Loom and Chrome Tie Wraps for a professional & clean installation. Dimensions: 0.34" Wide X 0.30" High. Lifetime Warranty Against LED Failure. Sold as a Pair. 

Dual color Amber/White LEDs are encased in a flexible smoked tubing which easily wraps around the front forks. The ends connect with a zip tie like connection and all units come pre-taped with 3M™ tape for added security. White DRL LEDs are automatically deactivated when the turn signal lamp or hazard warning lamp is activated giving greater visibility to the Amber turn signal.

View additional Fork Wrap Around Options.

If replacing stock turn signal bulbs, SMART Signal Stabilizer™ is required on 2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models to ensure proper function and flash speed of LED Turn Signals. For all other makes & models, SMART Signal Stabilizer™/ Load Equalizer is required if bike is NON-CANBUS.

39mm & 41mm = 18 LEDs Per Side
43mm & 49mm = 24 LEDs Per Side
56mm = 30 LEDs Per Side

Note: If your size fork is not listed please select the next size down. There will be a small gap on the back side of the fork where the LEDs do not touch.

In stock
$109.95
Pair

This product contains recommended 3M Adhesive Promoter and must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M Adhesive Promoter will be removed from package contents.

White DRL Running Light - 6000K Color Temp


Amber Turn Signal


Smoke Tube


LEDs Spaced 1 mm Apart


Dimensions: 0.34"W X 0.30"H


120 Degree Viewing Angle


Every 5 LEDs Draw ~25mA


Load Equalizer may be required


LIFETIME LED WARRANTY


SOLD AS A PAIR

FITMENT

Available for 39mm, 41mm, 43mm, 49mm, and 56mm forks

FMVSS Standard No 108 #5 States "If optically combined with a turn signal lamp, is automatically deactivated as a DRL when the turn signal lamp or hazard warning lamp is activated, and automatically reactivated as a DRL when the turn signal lamp or hazard warning lamp is deactivated".


If replacing stock turn signal bulbs, SMART Signal Stabilizer™ is required on 2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models to ensure proper function and flash speed of LED Turn Signals. For all other makes & models, SMART Signal Stabilizer™/ Load Equalizer is required if bike is NON-CANBUS.

PACKAGE CONTENTS

Dynamic TruWRAPZ® (pair)
AW-Converter (2)
Black #205 Heat Shrink Tubing (2)
3M Promoter Pack (2)
Chrome Zip Ties (10)
Stainless Steel Wire Loom (6')
Wire Loom Grey Shrink Tubing (2)
Posi-Locks (8)
Posi-Taps (6)

How To Measure

Use a string to wrap around the fork and mark where the string touches. Using a tape measure, measure the space between the start and end of the fork in millimeters. This measurement is the circumference. To get the diameter, use a calculator and divide the circumference by 3.14. The result is the diameter of your fork.
Write Your Own Review
You're reviewing:Amber/White Dynamic TruWRAPZ®
Your Rating
  • Recent Searches
  • night rod turn signal 248
  • Tail lights 125
  • road glide 60
  • Zx14 2012 40