
Blue Sequential LED Knight Riderz Light Bar with Flashing Brake Alert
Dual intensity light bar with Blue LEDs. In running light mode the LEDs sequence from side to side in a "Knight Rider" sequence. When the brake is applied the LED will flash for approximately 5-6 seconds then go to a solid on state until the brake is released. Both modes, running and brake, have been designed to create the maximum visibility. The unit comes pre-taped with 3M™ double sided tape for easy mounting to any flat surface.
Custom Dynamics® recommends installing with Posi-Tap™ Connectors (sold separately).
Blue running and brake illumination is not DOT compliant. This product should be used for off road, show, or emergency vehicle use only.
Warning: Cancer & Reproductive Harm — www.p65warnings.ca.gov
Products Similar To This
Details & Fitment
Dual intensity light bar with Blue LEDs. In running light mode the LEDs sequence from side to side in a "Knight Rider" sequence. When the brake is applied the LED will flash for approximately 5-6 seconds then go to a solid on state until the brake is released. Both modes, running and brake, have been designed to create the maximum visibility. The unit comes pre-taped with 3M™ double sided tape for easy mounting to any flat surface.
Custom Dynamics® recommends installing with Posi-Tap™ Connectors (sold separately).
Blue running and brake illumination is not DOT compliant. This product should be used for off road, show, or emergency vehicle use only.
Installation Instructions
Fitment
Compatible with 12VDC systems with a negative ground.
Blue running and brake illumination is not DOT compliant. This product should be used for off road, show, or emergency vehicle use only.
Specifications
- FOR EMERGENCY VEHICLES
- DIMENSIONS: 4.7" L X 0.7" W X 0.7" H
- 24 GAUGE
- 45” WIRE LEAD
- DUAL INTENSITY - SEQUENTIAL RUNNING LIGHT WITH FLASHING BRAKE ALERT
- LIFETIME LED WARRANTY
- SOLD EACH