LED Boltz for Custom Front White Running & Amber Turn Signal Lighting
FOR A CUSTOM SPOT OF BRIGHT FORWARD FACING LED LIGHT
LED Boltz utilize super bright LEDs for custom forward facing white running light and amber turn signal These compact units measure just 5/8” in diameter providing a bright spot LED light in either a Black or Polished finish. Each LED Boltz mount in a 1/2” hole and have 4’ of wire for seamless installation. Sold as a Pair.
Amber/White LED Boltz are 3 wire lights that can be wired to function as a white forward facing running light with amber turn signal. Custom Dynamics® Amber/White Converters required to turn white running light off when amber turn signal is activated (sold separately).
Compatible with 12VDC systems with a negative ground.
Solid Red or Solid Amber LED Boltz for Custom Run, Brake or Turn Signal also available.
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Specifications
Specifications5/8” in diameter
Amber/White LED
Polished Aluminum or Gloss Black Finish
Mounting Hardware Included
Require 1/2" Mounting Hole
0.79" Mounting Stud Length
White LEDS Draw 56ma
Amber LEDS Draw 106ma
24 AWG 4 FT Wire Leads
Lifetime LED Warranty
Sold Pair
FITMENT
Compatible with 12VDC systems with a negative ground.
Amber/White Converters required to turn white running light off when amber turn signal is activated (sold separately).
DETAILS
Amber/White LED Boltz are 3 wire lights that can be wired to function as a white forward facing running light with amber turn signal. Custom Dynamics® Amber/White Converters required to turn white running light off when amber turn signal is activated (sold separately).
Note: This product is designed and intended for use as auxiliary lighting only. It is NOT intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interfere with any original equipment lighting.
