LED Boltz for Custom Run, Brake, or Turn Signal Lighting
FOR A CUSTOM SPOT OF BRIGHT LED LIGHT
LED Boltz utilize super bright LEDs for custom motorcycle running light brake light, or turn signal lighting. These compact units measure just 5/8” in diameter providing a bright spot of Red or Amber LED light in either a Black or Polished finish. Each LED Boltz mount in a 1/2” hole and have 4’ of wire for seamless installation. Sold as a Pair.
Red LED Boltz are dual intensity, 3 wire lights that can be wired to function as a running light with brake, turn, or brake/turn depending on OEM wiring. A Custom Dynamics® SMART Triple Play® Run, Brake, Turn module may be required to achieve all 3 functions (sold separately).
Amber LED Boltz are single intensity, 2 wire lights that can be wired to function as a front or rear turn signal. A Custom Dynamics® Turn Signal Decoder may be required on some 2014-2020 Harley-Davidson® touring models (sold separately).
Compatible with 12VDC systems with a negative ground.
Amber/White Front Turn Signal LED Boltz also available.
Specifications
Specifications5/8” in diameter
Red or Amber LEDs
Polished Aluminum or Gloss Black Finish
Mounting Hardware Included
Require 1/2" Mounting Hole
Amber Boltz Draw 44ma
Red Boltz Draw 6ma (Low) & 44ma (High)
0.79" Mounting Stud Length
M12-1.75 Thread Pitch
24 AWG 4 FT Wire Leads
Lifetime LED Warranty
Sold Pair
FITMENT
Compatible with 12VDC systems with a negative ground.
DETAILS
Red LED Boltz are dual intensity, 3 wire lights that can be wired to function as a running light with brake, turn, or brake/turn depending on OEM wiring. A Custom Dynamics® SMART Triple Play® Run, Brake, Turn module may be required to achieve all 3 functions (sold separately).
Amber LED Boltz are single intensity, 2 wire lights that can be wired to function as a front or rear turn signal. A Custom Dynamics® Turn Signal Decoder may be required on some 2014-2020 Harley-Davidson® touring models (sold separately).
Note: This product is designed and intended for use as auxiliary lighting only. It is NOT intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interfere with any original equipment lighting.