In stock
SKU
TW-WS
DRL TruWRAPZ®
Easy to install, LED fork wrap around with White LEDs that are encased in a flexible smoked tubing. The ends connect with a zip tie like connection and all units come pre-taped with 3M™ tape for added security. Available for 41mm and 43mm forks. Product includes 6 Posi-Taps™ for simple tap-in installation, Stainless Steel Wire Loom and Chrome Tie Wraps for a professional & clean installation. Dimensions: 0.34" Wide X 0.30" High. Lifetime Warranty Against LED Failure. Sold as a Pair.
White LEDs will function as a running light and full contrast turn signal with the supplied harness. In order to have function as ONLY a running light or turn signal simply do not use the supplied harness and attach directly to the stock wiring on bike to pick up desired function.
View Additional Fork Wrap Around Fitments.
If replacing stock turn signal bulbs, SMART Signal Stabilizer™/ Load Equalizer is required on 2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models to ensure proper function and flash speed of LED Turn Signals. For all other makes & models, SMART Signal Stabilizer™/ Load Equalizer is required if bike is NON-CANBUS.
41mm = 21 LEDs Per Side
43mm = 21 LEDs Per Side
Note: If your size fork is not listed please select the next size down. There will be a small gap on the back side of the fork where the LEDs do not touch.
Note: This product is designed and intended for use as auxiliary lighting only. It is NOT intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interfere with any original equipment lighting
As low as
$74.95
Warning: Cancer & Reproductive Harm — www.p65warnings.ca.gov
Products Similar To This
Details & Fitment
Easy to install, LED fork wrap around with White LEDs that are encased in a flexible smoked tubing. The ends connect with a zip tie like connection and all units come pre-taped with 3M™ tape for added security. Available for 41mm and 43mm forks. Product includes 6 Posi-Taps™ for simple tap-in installation, Stainless Steel Wire Loom and Chrome Tie Wraps for a professional & clean installation. Dimensions: 0.34" Wide X 0.30" High. Lifetime Warranty Against LED Failure. Sold as a Pair.
White LEDs will function as a running light and full contrast turn signal with the supplied harness. In order to have function as ONLY a running light or turn signal simply do not use the supplied harness and attach directly to the stock wiring on bike to pick up desired function.
View Additional Fork Wrap Around Fitments.
If replacing stock turn signal bulbs, SMART Signal Stabilizer™/ Load Equalizer is required on 2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models to ensure proper function and flash speed of LED Turn Signals. For all other makes & models, SMART Signal Stabilizer™/ Load Equalizer is required if bike is NON-CANBUS.
41mm = 21 LEDs Per Side
43mm = 21 LEDs Per Side
Note: If your size fork is not listed please select the next size down. There will be a small gap on the back side of the fork where the LEDs do not touch.
Note: This product is designed and intended for use as auxiliary lighting only. It is NOT intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interfere with any original equipment lighting
Installation Instructions
Fitment
Available for 41mm and 43mm forks
Specifications
- White DRL Running Light - 6000K Color Temp
- Full Contrast White Turn Signal
- Smoked Tube
- LEDs Spaced 1 mm Apart
- Dimensions: 0.34"W X 0.30"H
- 120 Degree Viewing Angle
- Every 5 LEDs Draw ~25mA
- SMART Signal Stabilizer™ / Load Equalizer may be required
- LIFETIME LED WARRANTY
- SOLD AS A PAIR
Write Your Own Review