SKU
LB03
Dual Intensity Auxiliary LED Light Bar with Flashing Brake Alert
Write Your Own Review
KNIGHT RIDERZ
Dual intensity light bar with 12 Red LEDs. In running light mode the LEDs illuminate dim. When the brake is applied the LED will flash for approximately 5-6 seconds then go to a solid on state until the brake is released. The unit comes pre-taped with 3M™ double sided tape for easy mounting to any flat surface. Simply connect the black wire to any ground wire, the Red wire to your existing brake light wire and the blue wire to an existing running light power source. No load equalizer or resistors required.
$29.95
EachWarning: Cancer & Reproductive Harm — www.p65warnings.ca.gov
Details & Fitment
Dual intensity light bar with 12 Red LEDs. In running light mode the LEDs illuminate dim. When the brake is applied the LED will flash for approximately 5-6 seconds then go to a solid on state until the brake is released. The unit comes pre-taped with 3M™ double sided tape for easy mounting to any flat surface. Simply connect the black wire to any ground wire, the Red wire to your existing brake light wire and the blue wire to an existing running light power source. No load equalizer or resistors required.
Installation Instructions
Fitment
Works with any 12VDC system
Specifications
- 12 RED LEDS
- RED LENS
- DIMENSIONS: 4.5" L X 0.7" W X 0.7" H
- 24 GAUGE 45” WIRE LEAD
- DUAL INTENSITY - RUNNING LIGHT WITH FLASHING BRAKE ALERT
- LIFETIME LED WARRANTY
- SOLD EACH
