Dual Intensity Knight Riderz LED Light Bar with Flashing Brake Alert
Dual intensity light bar with 12 Red LEDs. In running light mode the LEDs illuminate dim. When the brake is applied the LED will flash for approximately 5-6 seconds then go to a solid on state until the brake is released. The unit comes pre-taped with 3M™ double sided tape for easy mounting to any flat surface. Simply connect the black wire to any ground wire, the Red wire to your existing brake light wire and the blue wire to an existing running light power source. No load equalizer or resistors required.
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Optional 3M™ Adhesive Promoter must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M™ Adhesive Promoter will be removed from package contents.
12 Red LEDs
Dimensions: 4.5" L x 0.7" W x 0.7" H
24 Gauge 45” Wire Lead
Dual Intensity - Running Light with Flashing Brake Alert
Lifetime LED Warranty
Works with any 12VDC system