or
Free Shipping on All Continental U.S. Orders Over $99
Shop by Ride
Shop By Ride
Make
Year
Model
Suggested fitment for U.S. models only.
In stock
SKU
CD-DLI-TKE

TKE Dynamic Load Isolator for 2014-2021 Harley-Davidson® Tri Gide® & Freewheeler®

ELECTRONICALLY ISOLATE ALL VEHICLE OUTPUTS FOR USE OF AFTERMARKET PRODUCTS

Custom Dynamics® Dynamic Load Isolator (DLI) for Harley-Davidson® uses the latest technology to isolate the motorcycle’s Body Control Module (BCM) allowing for the use of almost any aftermarket lighting product or electrical accessory. Simple plug and play installation provides output banks for 5 separate grounds, 2 accessory/run outputs, left turn signal output, right turn signal output, brake output, integrated right turn/brake output, and integrated left turn/brake output on 2014-Current Harley-Davidson® Tri Glide (FLTCUTG) and 2015-Current Freewheeler (FLRT). Does Not Fit CVO™ Tri Glide (FLTCUTGSE). Optional 4 Pin Trailer Harness (sold separately) can be wired to the DLI output providing completely isolated plug and play trailer lighting hook up.

$109.95
Each

Warning: Cancer & Reproductive Harm — www.p65warnings.ca.gov

  • Lifetime Warranty
  • Plug ‘N Play

Details & Fitment

Custom Dynamics® NEW Dynamic Load Isolator (DLI) for Harley-Davidson® uses the latest technology to isolate the motorcycle’s Body Control Module (BCM) allowing for the use of almost any aftermarket lighting product or electrical accessory. Simple plug and play installation provides output banks for 5 separate grounds, 2 accessory/run outputs, left turn signal output, right turn signal output, brake output, integrated right turn/brake output, and integrated left turn/brake output. Optional 4 Pin Trailer Harness (sold separately) can be wired to the DLI output providing completely isolated plug and play trailer lighting hook up.

The DLI electronically isolates all outputs from the vehicle, there are no relays or other mechanical devices that are subject to mechanical failure.  A short circuit on any accessory connected to the DLI outputs will have no impact on the vehicle, all outputs are 100% isolated from the inputs to help protect factory warranty, prevent BCM codes and avoid damage to the vehicle from non-compliant aftermarket accessories.

Recommended for use with Custom Dynamics® Plasma Rods™LED License Plate Frames, or any aftermarket lighting product or electrical accessory when installed on 2014-2021 Harley-Davidson® Tri Glide® and 2015-2021 Freewheeler® (Does Not Fit 2020-2021 CVO™ Tri Glide®). Can also be used in conjunction with Custom Dynamics® Magic Strobes™ Brake Light Flasher to add 10 adjustable brake flash/strobe patterns to the brake, right turn/brake, and left turn/brake power outlets.

Note: Additional CanBus Adapter (1 per turn signal) is required when stock rear turn signals are removed for custom applications. Sold Separately.  

Installation Instructions

Fitment

Plug and Play on 2014-Current Harley-Davidson® Tri Glide (FLTCUTG) and 2015-Current Freewheeler (FLRT).

Does Not Fit CVO™ Tri Glide (FLTCUTGSE).

Note: Additional CanBus Adapter (1 per turn signal) is required when stock rear turn signals are removed for custom applications. Sold Separately.

Specifications

  • PLUG & PLAY INSTALLATION
  • TERMINAL CONNECTORS FOR BATTERY HOOK UP
  • ISOLATES HARLEY-DAVIDSON® BCM TO PREVENT CODES AND DAMAGE TO THE VEHICLE FROM AFTERMARKET PRODUCTS
  • HELPS PROTECT FACTORY WARRANTY BY ISOLATING ALL AFTERMARKET ELECTRICAL ACCESSORIES
  • PROVIDES OUTPUTS FOR AFTERMARKET LIGHTING & ELECTRICAL ACCESSORIES
  • WORKS WITH LED OR INCANDESCENT BULBS
  • OPTIONAL 4 PIN TRAILER HARNESS
  • 30 AMP TOTAL MAXIMUM OUTPUT CAPACITY
  • 5 AMPS PER OUTPUT, 10 AMPS PER ACCESSORY OUTPUT
  • 4 WAY HAZARD COMPATIBLE
  • LIFETIME WARRANTY
  • DLI UNIT MEASURES 2.5" X 2.5" X 0.75"
Write Your Own Review
You're reviewing:TKE Dynamic Load Isolator for 2014-2021 Harley-Davidson® Tri Gide® & Freewheeler®
Your Rating