GEN-200-AW-HDI

GEN-200-AW-1156™ H-D™ International (HDI) Front Dynamic Ringz™ LED Turn Signal Inserts

THE ORIGINAL FULL FUNCTION AMBER/WHITE TURN SIGNAL

Front LED turn signal OEM replacement made with 48 5mm LEDs per unit. Our popular Dynamic Ringz™ allow the outer ring of 24 white LEDs to function as a running light and 24 center amber LEDs to function as the turn signal. 1156 bulb base will plug into turn signal socket with extended wire to access run light power. When a turn signal is activated the White LEDs turn completely off for the entire turn signal cycle providing greater visibility to the amber turn signal (must be used with a clear or smoked lens - Sold Separately). BCM Compliant. Available in bullet style (pop off lens) or flat style (2 screw lens). Lifetime Warranty against LED failure. Sold as Pair.

Bullet Style replaces bulb in stock OEM turn signal housing with pop off lens with tabs. 
Flat Style replaces bulb in stock OEM "pancake" style housing with lens held on by two screws.

This Item is NOT plug and play and requires one wire to be routed through the turn signal housing and connected to the running light. Reference installation instructions below

Fits front turn signals on International Harley-Davidson® (HDI) models with 1156 single contact basesView Additional Fitments.

SMART Signal Stabilizer™/ Load Equalizer is required on 2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models to ensure proper function and flash speed of LED Turn Signals. 

Check out our TruBEAM® LED Headlamps with built in Halo.

In stock
$89.95
Pair

48 5mm Genesis® LEDs per unit


24 White DRL LEDs


24 Amber Turn LEDs


Front Turn Signals


1156 Pigtail Bulb Base


BCM Compliant


SMART Signal Stabilizer™/ Load Equalizer may be required


Lifetime LED Warranty


Sold as a Pair

FITMENT

Front turn signals on International Harley-Davidson® (HDI) models with 1156 single contact bases

Bullet Style replaces bulb in stock OEM turn signal housing with pop off lens with tabs. 

Flat Style replaces bulb in stock OEM "pancake" style housing with lens held on by two screws.

Dynamic Ringz™ (Amber/White) require one wire to be routed through the turn signal housing and connected to the running light circuit. Reference installation instructions.

2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models require a SMART Signal Stabilizer™ to ensure proper function and flash speed of LED Turn Signals. 

RELATED PRODUCTS

Bullet Ringz™ are also an OEM Bullet Style LED upgrade with 7 LEDs embedded into an outer aluminum bezel and a cluster of 24 inner LEDs built into a Chrome or Black Bezel.

Flat Ringz™ are also an OEM Flat Style LED upgrade with 8 LEDs embedded into an outer aluminum bezel and a cluster of 48 inner LEDs built into a Chrome or Black Bezel.

ADDITIONAL FITMENTS 

H-D™ Flat Style 
H-D™ Old Bullet Style
H-D™ New Bullet Style
Yamaha Models
Honda Cruisers 
Kawasaki Models
Indian Models
Chopper

Instructional, helpful and informative. Here are the videos that relate to this product.

Write Your Own Review
You're reviewing:GEN-200-AW-1156™ H-D™ International (HDI) Front Dynamic Ringz™ LED Turn Signal Inserts
Your Rating
  • Recent Searches
  • tour pak lights 170
  • 2040-1644 2
  • street magic 85
  • 2040-1077 2