GEN-200-AR2-HDI

GEN-200-AR2-1156™ H-D™ International (HDI) Rear Amber/Red Dynamic Clusters2™ LED Turn Signal Inserts

FOR H-D® INTERNATIONAL (HDI) MODELS ONLY

Rear LED turn signal OEM replacement made with 48 5mm LEDs per unit. Our popular Dynamic Clusters2™ allow the outer ring of 24 red LEDs to function as a running and brake light and 24 center amber LEDs to function as the turn signal. 1156 bulb base will plug into turn signal socket with two extended wires to access running light and brake light power. Available in bullet style (pop off lens) or flat style (2 screw lens). BCM Compliant. Lifetime Warranty against LED failure. Sold as Pair.

Bullet Style replaces bulb in stock OEM turn signal housing with pop off lens with tabs.

Flat Style replaces bulb in stock OEM "pancake" style housing with lens held on by two screws.

This Item is NOT plug and play and requires two wires to be routed through the turn signal housing and connected to the running light and brake light power. Reference installation instructions below

Replaces front or rear OEM turn signal on Harley-Davidson® International (HDI) models with 1156 single contact turn signal bases. View Additional Fitments

SMART Signal Stabilizer™ is required on 2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models to ensure proper function and flash speed of LED Turn Signals. 

In stock
$89.95
Pair

48 5mm Genesis® LEDs per unit


24 Red Run/Brake LEDs


24 Inner Amber Turn LEDs


Rear Turn Signals


BCM Compliant


SMART Signal Stabilizer™ / Load Equalizer may be required


Lifetime LED Warranty


Sold as a Pair

FITMENT

Replaces front or rear OEM turn signal on Harley-Davidson® International (HDI) models with 1156 single contact turn signal bases.

Bullet Style replaces bulb in stock OEM turn signal housing with pop off lens with tabs.

Flat Style replaces bulb in stock OEM "pancake" style housing with lens held on by two screws.

Dynamic Clusters2™ require two wires to be routed through the turn signal housing and connected to running light and brake light power. Reference installation instructions below.

2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models require a SMART Signal Stabilizer™/ Load Equalizer to ensure proper function and flash speed of LED Turn Signals. 

Dynamic Clusters2™ are NOT compatible with our SMART Triple Play® or any Run/Brake/Turn module.

RELATED PRODUCTS

Additional OEM replacement Old Bullet Style LED Insert Turn Signals including front options, complete conversion kits, and additional rear options.

Bullet Ringz™ are also an OEM Bullet Style LED upgrade with 7 LEDs embedded into an outer aluminum bezel and a cluster of 24 inner LEDs built into a Chrome or Black Bezel.

Magic Strobes™ Brake Light Flasher allows riders to easily select from 10 Flash/Strobe patterns by simply spinning a dial.

ADDITIONAL FITMENTS 

H-D™ Flat Style 
H-D™ Old Bullet Style
H-D™ New Bullet Style
Yamaha Models
Honda Cruisers 
Kawasaki Models
Indian Models
Chopper

Instructional, helpful and informative. Here are the videos that relate to this product.

Write Your Own Review
You're reviewing:GEN-200-AR2-1156™ H-D™ International (HDI) Rear Amber/Red Dynamic Clusters2™ LED Turn Signal Inserts
Your Rating
  • Recent Searches
  • magic strobe 78
  • led cluster 386
  • truflex side mount kit 240
  • Side mount 184