Only %1 left
SKU
TF110R
TruFLEX® 2 Section Auxiliary Red LED Light Strips
PROFESSIONAL GRADE FLEXIBLE LED LIGHTING STRIPS
Flexible TruFLEX® LED lighting strip is split in the center, with wires exiting each side for power and ground connections. Low profile design with surface mount Red LEDs spaced only 1mm apart encased in a flexible, UV resistant Red tubing. Unique facet design increases viewing angle to 120 degrees. TruFLEX® light bar comes pre-taped with automotive grade tape for mounting on back surface.
Dual Converters (sold separately) are required for dual low and high intensity function with such as running light and brake light. Models with OEM dual function (run, brake, turn) rear turn signals can typically utilize two Dual Converters to acheive run, brake and turn signal.
Models with OEM single function rear turn signals typically require a SMART Triple Play® module (sold separately) for light bar to function as run, brake & turn signals.
Additional installation supplies such as Posi-Taps™ quick connectors or a model specific Wiring Adapter can be added to simplify wiring & installation.
As low as
$89.95
EachWarning: Cancer & Reproductive Harm — www.p65warnings.ca.gov
Details & Fitment
Flexible TruFLEX® LED lighting strip is split in the center, with wires exiting each side for power and ground connections. Low profile design with surface mount Red LEDs spaced only 1mm apart encased in a flexible, UV resistant Red tubing. Unique facet design increases viewing angle to 120 degrees. TruFLEX® light bar comes pre-taped with automotive grade tape for mounting on back surface.
Dual Converters (sold separately) are required for dual low and high intensity function with such as running light and brake light. Models with OEM dual function (run, brake, turn) rear turn signals can typically utilize two Dual Converters to acheive run, brake and turn signal.
Models with OEM single function rear turn signals typically require a SMART Triple Play® module (sold separately) for light bar to function as run, brake & turn signals.
Additional installation supplies such as Posi-Taps™ quick connectors or a model specific Wiring Adapter can be added to simplify wiring & installation.
Every 5 LEDs draw approximately 25mA. Dimensions: 14.0" L X 0.34" W X 0.30" H
Installation Instructions
Fitment
12VDC systems with a negative ground.
Specifications
- RED LENS
- 2 SECTION - 55 RED/55 RED
- DIMENSIONS: 14.0" L X 0.34" W X 0.30" H
- LEDS SPACED 1MM APART
- 120 DEGREE VIEWING ANGLE
- EVERY 5 LEDS DRAW~ 25MA
- EVERY 5 LEDS DRAW~ 25MA
- 36" STRANDED COPPER 26-GAUGE WIRE
- LIFETIME LED WARRANTY
- SOLD EACH
Write Your Own Review