Magic Strobes™ Brake Light Flasher for Dyna® Models
BE SAFE AND BE SEEN™
This unit must be used with rear LEDs only, no incandescents! Riders can easily select from 10 Flash/Strobe Patterns by simply spinning the dial on the Magic Strobes Brake Light Flasher™ module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6". It has a built in SMART function that will disable the strobe/flashing on turn signals if simultaneously braking and turning.
Plug and Play on '12-'17 Street Bob, Wide Glide, Low Rider S. Requires the use of LED bulbs in the rear.
Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal. US Patent 9,566,902 B1
10 User Selectable Flash/Strobe Patterns
Over Current Protection
Built In Short Circuit Protection
Reverse Wiring Protection
84 Watts Max Power Rating, 12VDC
Works with LEDs ONLY
Sealed, Weather Tight Case
Compact Size: 4.2" x 1.4" x 0.6"
US Patent 9,566,902 B1
5 Year Warranty
Plug and Play on '12-'17 Street Bob®, Wide Glide®, Low Rider® S.
Requires the use of LED bulbs in the rear.
Pattern 0: Four Flashes then Solid (Incandescent or LED)
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)
Pattern 2: Seven Flashes then Solid (Incandescent or LED)
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat (Incandescent or LED)
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe (LED Only)
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat (LED Only)
Pattern 6: Custom LED Blaster X Cycle for 3 seconds, then Solid (LED Only)
Pattern 7: Custom LED Blaster X Cycle, Repeat (LED Only)
Pattern 8: Max Strobe 4 Seconds, Solid (LED Only)
Pattern 9: Constant Max Strobe Pattern (LED Only)