Magic Strobes™ TKE Brake Light Flasher for 2014-2020 Tri Glide® & FreeWheeler®
OUTSTANDING SAFETY AND VISIBILITY
Plug and play installation on 2014-2020 Harley-Davidson® Tri Glide® and 2015-2020 FreeWheeler® (Does Not Fit 2020 CVO™ Tri Glide®) applies brake flash/strobe patterns to Custom Dynamics® Squareback or Low Profile rear run/brake/turn taillights (does not flash Tour-Pak). Will also strobe Low Profile LED Fender Lights for Tri Glide® if equipped.
To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.
Use in conjunction with our Magic Strobes™ LTP2 to apply brake flash/strobe patterns to Tour-Pak.
*Requires the use of Custom Dynamics® LEDs (or any low power current draw LEDs) in the rear. The use of Incandescent or High-Power LEDs (greater than 300ma) will cause the unit to fail and void warranty*
Riders can easily select from 10 flash/strobe patterns by simply spinning the dial on the Magic Strobes™ Brake Light Flasher module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6".
Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.
US Patent 9,566,902 B1
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
Specifications
Specifications10 Flash/Strobe Patterns
Over Current Protection
Thermal Protection
Short Circuit Protection
Reverse Wiring Protection
84 Watts Max Power Rating, 12VDC
Works with LEDs Only
Compact Size: 4.2" x 1.4" x 0.6"
US Patent 9,566,902 B1
Lifetime Warranty
Sold Each
FITMENT
Plug and play installation on 2014-2020 Harley-Davidson® Tri Glide® and 2015-2020 FreeWheeler® (Does Not Fit 2020 CVO™ Tri Glide®) applies brake flash/strobe patterns to Custom Dynamics® Squareback or Laydown rear run/brake/turn taillights (does not flash Tour-Pak).
*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.*
Use in conjunction with our Magic Strobes™ LTP2 to apply brake flash/strobe patterns to Tour-Pak.
Install our Magic Strobes™ HD on 2010-2013 Tri Glide®
Additional Fitments also available.
USER FUNCTIONS
Pattern 0: Four Flashes then Solid
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat
Pattern 2: Seven Flashes then Solid
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat
Pattern 6: Blaster X Pattern for 6 Seconds, then Solid
Pattern 7: Custom LED Blaster X Cycle, Repeat
Pattern 8: Max Strobe 4 Seconds, Solid
Pattern 9: No Pattern
