• Plug n’ Play
  • Lifetime Warranty
MAGIC-STROBES-RSG

Magic Strobes™ RSG Brake Light Flasher for 14-20 H-D™ Touring

UNMATCHED SAFETY AND VISIBILITY

Plug and play installation on 2014-2020 Street Glide®, Street Glide® Special, Road Glide®, Road Glide® Special, Road King® Special applies brake flash/strobe patterns to Custom Dynamics® Rear 1157 LED bullet style run, brake, and turn signals. To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.

Plug and Play installation on 2014-2020 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra, Road Glide® Limited, 2016 Road Glide Ultra CVO™ and 2016-2020 Limited CVO™ applies brake flash/strobe patterns to LED Squareback or Laydown rear center taillight (does not flash Tour-Pak). Unit also allows Fillerz® and/or BAGZ™ Saddlebag LED Lights to flash/strobe when functioning as Run/Brake/Turn. Alternatively use the original Magic Strobes™ BCM to flash only the center taillight. Use in conjunction with our Magic Strobes™ LTP2 to apply brake flash/strobe patterns to Tour-Pak.

*Only Compatible with USA Model Harley-Davidson® Motorcycles.

*Requires the use of Custom Dynamics® LEDs (or any low power current draw LEDs) in the rear. The use of Incandescent or High-Power LEDs (greater than 84 Watts or 6 Amps) will cause the unit to fail and void warranty*

Riders can easily select from 10 flash/strobe patterns by simply spinning the dial on the Magic Strobes™ Brake Light Flasher module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6". 

Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal

US Patent 9,566,902 B1


In stock
$89.95
Each
WARNING: Cancer & Reproductive Harm - www.p65warnings.ca.gov

10 Flash/Strobe Patterns


Over Current Protection


Thermal Protection


Short Circuit Protection


Reverse Wiring Protection


84 Watts/6 Amp Max Power Rating, 12VDC


Works with LEDs Only


Compact Size: 4.2" x 1.4" x 0.6"


US Patent 9,566,902 B1


Lifetime Warranty


Sold Each

FITMENT

Plug and play installation on 2014-2020 Street Glide®, Street Glide® Special, Road Glide®, Road Glide® Special, Road King® Special applies brake flash/strobe patterns to Custom Dynamics® Rear 1157 LED bullet style run, brake, and turn signals. This unit is not compatible with Harley-Davidson® aftermarket dual intensity Tri-Bar.

Plug and play installation on 2014-2020 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra, Road Glide® Limited, 2016 Road Glide Ultra CVO™ and 2016-2020 Limited CVO™ applies brake flash/strobe patterns to rear center LED taillight (does not flash Tour-Pak). Unit also allows Fillerz® and/or BAGZ™ Saddlebag LED Lights to flash/strobe when functioning as Run/Brake/Turn. 

 

*Only Compatible with USA Model Harley-Davidson® Motorcycles.

*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.*

Additional Fitments also available.

 

USER FUNCTIONS

Pattern 0: Four Flashes then Solid  
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat 
Pattern 2: Seven Flashes then Solid 
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat 
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe 
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat
Pattern 6: Blaster X Pattern for 6 Seconds, then Solid
Pattern 7: Custom LED Blaster X Cycle, Repeat 
Pattern 8: Max Strobe 4 Seconds, Solid 
Pattern 9: No Pattern

Write Your Own Review
You're reviewing:Magic Strobes™ RSG Brake Light Flasher for 14-20 H-D™ Touring
Your Rating