MAGIC-STROBES-LTP2
New

Magic Strobes™ LTP2 Brake Light & Turn Signal Flasher for H-D™ LED Tour-Pak

STROBE CENTER BRAKE LIGHT AND CORNERS OF TOUR-PAK

Plug and play installation for stock Harley-Davidson® LED Tour-Pak on 2014-2018 Electra Glide®, Ultra, Road Glide® Ultra, and Tri Glide® models including CVO™ applies brake flash/strobe pattern to center Run/Brake portion of the Tour-Pak LEDs and allows left and right corner LEDs to flash/strobe when functioning as Run/Brake/Turn. 

Riders can easily select from 10 flash/strobe patterns by simply spinning the dial on the Magic Strobes Brake Light Flasher™ module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6". 

This unit will strobe the Tour-Pak only and can be used with or without our Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.

NOTE: Confirm stock Tour-Pak operation before purchasing. Corners of stock LED Tour-Pak must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak. BCM may need to be reprogrammed for left, center, and right sections of Tour-Pak LED to flash/strobe when brake is applied.

Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.

$89.95
Each

10 Flash/Strobe Patterns


Over Current Protection


Thermal Protection


Short Circuit Protection


Reverse Wiring Protection


84 Watts Max Power Rating, 12VDC


Works with LEDs Only


Compact Size: 4.2" x 1.4" x 0.6"


US Patent 9,566,902 B1


5 Year Warranty


Sold Each

FITMENT

Plug and play for stock LED Tour-Pak on 2014-2018 Electra Glide®, Ultra, Road Glide® Ultra, and TriGlide® models including CVO™

Confirm stock Tour-Pak operation before purchasing. Corners of stock LED Tour-Pak must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak. BCM may need to be reprogrammed for left, center, and right sections of LED  Tour-Pak to flash/strobe when brake is applied. 

This unit will strobe the Tour-Pak only and can be used with or without our Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.

Additional Fitments also available.

 

USER FUNCTIONS

Pattern 0: Four Flashes then Solid  
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat 
Pattern 2: Seven Flashes then Solid 
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat 
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe 
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat
Pattern 6: Custom LED Blaster X Cycle for 3 seconds, then Solid 
Pattern 7: Custom LED Blaster X Cycle, Repeat 
Pattern 8: Max Strobe 4 Seconds, Solid 
Pattern 9: Constant Max Strobe Pattern 

Instructional, helpful and informative. Here are the videos that relate to this product.

Write Your Own Review
You're reviewing:Magic Strobes™ LTP2 Brake Light & Turn Signal Flasher for H-D™ LED Tour-Pak
Your Rating
  • Recent Searches
  • truflex 28
  • baseplate 1
  • base plate 119
  • 2008 street glide 121