or
Free Shipping on All Continental U.S. Orders Over $99
Shop by Ride
Shop By Ride
Make
Year
Model
Suggested fitment for U.S. models only.
In stock
SKU
MAGIC-STROBES-LTP2

Magic Strobes™ LTP2 Brake Light for 2014-2021 H-D™ LED Tour-Pak

Rating:
100% of 100
STROBE CENTER BRAKE LIGHT AND CORNERS OF TOUR-PAK

Plug and play installation for stock Harley-Davidson® LED Tour-Pak on 2014-2021 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra, Road Glide® Limited and Tri Glide® models including CVO™ applies brake flash/strobe pattern to center Run/Brake portion of the Tour-Pak LEDs and allows left and right corner LEDs to flash/strobe when functioning as Run/Brake/Turn. To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.

Riders can easily select from 10 flash/strobe patterns by simply spinning the dial on the Magic Strobes Brake Light Flasher™ module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6". 

This unit will strobe the Tour-Pak only and can be used with or without our Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.

NOTE: Confirm stock Tour-Pak operation before purchasing. Corners of stock LED Tour-Pak must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak. BCM may need to be reprogrammed for left, center, and right sections of Tour-Pak LED to flash/strobe when brake is applied.

 NOTE:  When used in conjunction with SMART Triple Play BCM® on 2014-2015 Limited CVO™, 2015 Road Glide® Ultra CVO™ the center brake only section of the Tour Pak will flash/strobe when the brake is applied. The corner sections will function as run/turn signal only. 

Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.

*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail. 

U.S. Patent 9,566,902 B1

 

Read More
$89.95
Each

Warning: Cancer & Reproductive Harm — www.p65warnings.ca.gov

  • Lifetime Warranty
  • Plug ‘N Play

Details & Fitment

Plug and play installation for stock Harley-Davidson® LED Tour-Pak on 2014-2021 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra, Road Glide® Limited and Tri Glide® models including CVO™ applies brake flash/strobe pattern to center Run/Brake portion of the Tour-Pak LEDs and allows left and right corner LEDs to flash/strobe when functioning as Run/Brake/Turn. To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.

Riders can easily select from 10 flash/strobe patterns by simply spinning the dial on the Magic Strobes Brake Light Flasher™ module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6". 

This unit will strobe the Tour-Pak only and can be used with or without our Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.

NOTE: Confirm stock Tour-Pak operation before purchasing. Corners of stock LED Tour-Pak must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak. BCM may need to be reprogrammed for left, center, and right sections of Tour-Pak LED to flash/strobe when brake is applied.

 NOTE:  When used in conjunction with SMART Triple Play BCM® on 2014-2015 Limited CVO™, 2015 Road Glide® Ultra CVO™ the center brake only section of the Tour Pak will flash/strobe when the brake is applied. The corner sections will function as run/turn signal only. 

Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.

*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail. 

U.S. Patent 9,566,902 B1

 

Fitment

Plug and play for stock LED Tour-Pak® on 2014-2021 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra, Road Glide® Limited and Tri Glide® models including CVO™ 

Confirm stock Tour-Pak® operation before purchasing. Corners of stock LED Tour-Pak® must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak®. BCM may need to be reprogrammed for left, center, and right sections of LED Tour-Pak® to flash/strobe when brake is applied. Note: this module cannot be used with the  SMART Triple Play® BCM. 

Specifications

  • 10 FLASH/STROBE PATTERNS
  • OVER CURRENT PROTECTION
  • THERMAL PROTECTION
  • SHORT CIRCUIT PROTECTION
  • REVERSE WIRING PROTECTION
  • 84 WATTS MAX POWER RATING, 12VDC
  • WORKS WITH LEDS ONLY
  • COMPACT SIZE: 4.2" X 1.4" X 0.6"
  • US PATENT 9,566,902 B1
  • LIFETIME WARRANTY
  • SOLD EACH
Dig Deeper

Videos

Write Your Own Review
You're reviewing:Magic Strobes™ LTP2 Brake Light for 2014-2021 H-D™ LED Tour-Pak
Your Rating