MAGIC-STROBES-LTP2

Magic Strobes™ LTP2 Brake Light & Turn Signal Flasher for H-D™ LED Tour-Pak

STROBE CENTER BRAKE LIGHT AND CORNERS OF TOUR-PAK

Plug and play installation for stock Harley-Davidson® LED Tour-Pak on 2014-2019 Electra Glide®, Ultra, Road Glide® Ultra, and Tri Glide® models including CVO™ applies brake flash/strobe pattern to center Run/Brake portion of the Tour-Pak LEDs and allows left and right corner LEDs to flash/strobe when functioning as Run/Brake/Turn. To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.

Riders can easily select from 10 flash/strobe patterns by simply spinning the dial on the Magic Strobes Brake Light Flasher™ module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6". 

This unit will strobe the Tour-Pak only and can be used with or without our Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.

NOTE: Confirm stock Tour-Pak operation before purchasing. Corners of stock LED Tour-Pak must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak. BCM may need to be reprogrammed for left, center, and right sections of Tour-Pak LED to flash/strobe when brake is applied.

 NOTE:  When used in conjunction with SMART Triple Play BCM® on 2014-2015 Limited CVO™, 2015 Road Glide® Ultra CVO™ the center brake only section of the Tour Pak will flash/strobe when the brake is applied. The corner sections will function as run/turn signal only. 

Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.

*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.*

$89.95
Each

Prop 65 WarningWARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

10 Flash/Strobe Patterns


Over Current Protection


Thermal Protection


Short Circuit Protection


Reverse Wiring Protection


84 Watts Max Power Rating, 12VDC


Works with LEDs Only


Compact Size: 4.2" x 1.4" x 0.6"


US Patent 9,566,902 B1


5 Year Warranty


Sold Each

FITMENT

Plug and play for stock LED Tour-Pak on 2014-2019 Electra Glide®, Ultra, Road Glide® Ultra, and TriGlide® models including CVO™

Confirm stock Tour-Pak operation before purchasing. Corners of stock LED Tour-Pak must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak. BCM may need to be reprogrammed for left, center, and right sections of LED  Tour-Pak to flash/strobe when brake is applied. Note: this module cannot be used with the  SMART Triple Play® BCM. 

This unit will strobe the Tour-Pak only and can be used with or without our Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.

*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.*

Additional Fitments also available.

 

USER FUNCTIONS

Pattern 0: Four Flashes then Solid  
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat 
Pattern 2: Seven Flashes then Solid 
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat 
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe 
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat
Pattern 6: Blaster X Pattern for 6 Seconds, then Solid
Pattern 7: Custom LED Blaster X Cycle, Repeat 
Pattern 8: Max Strobe 4 Seconds, Solid 
Pattern 9: No Pattern

Write Your Own Review
You're reviewing:Magic Strobes™ LTP2 Brake Light & Turn Signal Flasher for H-D™ LED Tour-Pak
Your Rating