Magic Strobes™ LTP2 Brake Light for 2014-2021 H-D™ LED Tour-Pak
STROBE CENTER BRAKE LIGHT AND CORNERS OF TOUR-PAK
Plug and play installation for stock Harley-Davidson® LED Tour-Pak on 2014-2021 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra, Road Glide® Limited and Tri Glide® models including CVO™ applies brake flash/strobe pattern to center Run/Brake portion of the Tour-Pak LEDs and allows left and right corner LEDs to flash/strobe when functioning as Run/Brake/Turn. To provide clear signals, normal turn signal flash will automatically override the brake flash/strobe when simultaneously braking and turning.
Riders can easily select from 10 flash/strobe patterns by simply spinning the dial on the Magic Strobes Brake Light Flasher™ module! It has a sleek design and compact dimensions: 4.2" x 1.4" x 0.6".
This unit will strobe the Tour-Pak only and can be used with or without our Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.
NOTE: Confirm stock Tour-Pak operation before purchasing. Corners of stock LED Tour-Pak must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak. BCM may need to be reprogrammed for left, center, and right sections of Tour-Pak LED to flash/strobe when brake is applied.
NOTE: When used in conjunction with SMART Triple Play BCM® on 2014-2015 Limited CVO™, 2015 Road Glide® Ultra CVO™ the center brake only section of the Tour Pak will flash/strobe when the brake is applied. The corner sections will function as run/turn signal only.
Although this device has been designed to significantly increase your braking visibility, flash/strobe patterns may not be street legal.
*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.
U.S. Patent 9,566,902 B1
Specifications
Specifications10 Flash/Strobe Patterns
Over Current Protection
Thermal Protection
Short Circuit Protection
Reverse Wiring Protection
84 Watts Max Power Rating, 12VDC
Works with LEDs Only
Compact Size: 4.2" x 1.4" x 0.6"
US Patent 9,566,902 B1
Lifetime Warranty
Sold Each
FITMENT
Plug and play for stock LED Tour-Pak® on 2014-2021 Electra Glide® Ultra Classic®/Lo, Ultra Limited/Lo, Road Glide® Ultra, Road Glide® Limited and Tri Glide® models including CVO™
Confirm stock Tour-Pak® operation before purchasing. Corners of stock LED Tour-Pak® must function as Run/Brake/Turn for brake/flash patterns to affect these sections of the Tour-Pak®. BCM may need to be reprogrammed for left, center, and right sections of LED Tour-Pak® to flash/strobe when brake is applied. Note: this module cannot be used with the SMART Triple Play® BCM.
This unit will strobe the Tour-Pak® only and can be used with or without our Magic Strobes™ BCM or Magic Strobes™ RSG to apply brake flash/strobe patterns to rear fender brake lights.
*Requires the use of LED bulbs in the rear. Must be used with Low Power Current Draw LEDs such as Custom Dynamics® LEDs. The use of Incandescent or High Power LEDs (greater than 300ma) will cause the unit to fail.*
Additional Fitments also available.
USER FUNCTIONS
Pattern 0: Four Flashes then Solid
Pattern 1: Four Flashes, Solid for 3 Seconds, Repeat
Pattern 2: Seven Flashes then Solid
Pattern 3: Seven Flashes, Solid for 3 Seconds, Repeat
Pattern 4: Quad Strobe, then Solid for 1 Second then Quad Strobe
Pattern 5: Quad Strobe, Solid for 1 Second, then Quad Strobe, Solid for 3 Seconds, Repeat
Pattern 6: Blaster X Pattern for 6 Seconds, then Solid
Pattern 7: Custom LED Blaster X Cycle, Repeat
Pattern 8: Max Strobe 4 Seconds, Solid
Pattern 9: No Pattern