Only %1 left
SKU
M215
MagicFLEX®2 Wheel Light
EASILY MOUNTS TO BRAKE CALIPER
MagicFLEX®2 Wheel Lights contain 15 LEDs which illuminate 360 degrees around the outer edge of a round puck to project light on the wheel rim. Mounts to the inside of the front wheel brake caliper where there is a ½” clearance between the wheel and caliper. Each MagicFLEX®2 Wheel Light comes with 84” color coded wire leads in high temp protective black sheathing, have a waterproof conformal coating, and are pre-taped with adhesive tape for a durable installation. All LEDs are backed by a lifetime warranty against LED failure. Sold Each.
Available with either a chrome or black case to match the caliper.
Dimensions: 2.9” x 2.3” x .4”.
Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away.
Add Adhesive Primer to increase adhesion of 3M™ double-sided tape. For Chrome Brake Lines, add Stainless Steel Wire Loom and Chrome Zip Ties for a clean wiring job!
As low as
$24.95
EachWarning: Cancer & Reproductive Harm — www.p65warnings.ca.gov
Details & Fitment
MagicFLEX®2 Wheel Lights contain 15 LEDs which illuminate 360 degrees around the outer edge of a round puck to project light on the wheel rim. Mounts to the inside of the front wheel brake caliper where there is a ½” clearance between the wheel and caliper. Each MagicFLEX®2 Wheel Light comes with 84” color coded wire leads in high temp protective black sheathing, have a waterproof conformal coating, and are pre-taped with adhesive tape for a durable installation. All LEDs are backed by a lifetime warranty against LED failure. Sold Each.
Available with either a chrome or black case to match the caliper.
Dimensions: 2.9” x 2.3” x .4”.
Add one of Custom Dynamics® single color accent light remotes for added functions and to control your lights from up to 100ft away.
Add Adhesive Primer to increase adhesion of 3M™ double-sided tape. For Chrome Brake Lines, add Stainless Steel Wire Loom and Chrome Zip Ties for a clean wiring job!
Installation Instructions
Fitment
All Harley-Davidson® Brake Calipers (except: narrow glide front ends (Sportsters®, some Dynas®), and '06 and up V-Rods).
Also Fits Any Metric where the back side of the brake caliper is flat and there is 5/8" clearance between the caliper and wheel.
Not compatible with Indian models. Use Custom Dynamics® MagicFLEX®2 LED Wheel Kit for Indian® for front and rear wheel illumination on models with fender skirts.
Compatible with 12VDC systems with a negative ground.
Specifications
- 15 LEDS PER UNIT
- 1/2" LED SPACING
- 5050 LEDS
- DIMENSIONS: 2.9” X 2.3” X 0.4”
- 12VDC SYSTEMS
- 84” COLOR CODED WIRE LEADS IN HIGH TEMP PROTECTIVE BLACK SHEATHING
- LIFETIME LED WARRANTY
- SOLD EACH
Products Similar To This
Dig Deeper
Videos
Write Your Own Review