Mega Plasma Rods™ Pair
Work Great as an Additional Turn Signal or Brake Light!
Plasma Rods™ use a patented LED technology that produces a bright, incredibly smooth light output unlike anything you have seen before. Plasma Rods™ can be used about anywhere but they work great as turn signals or brake lights located between your bags and your fender/filler panel or as a third brake light located under your tour pak. Plasma Rods™ mount with included 3M™ automotive grade tape. With their smoke lens, Plasma Rods™ are almost invisible when off and bright Red or Amber when illuminated. Use Eclipze2™ Module or dual converter to convert to dual intensity. See Specifications to determine which application is right for you. Use 8" length for standard bags and 10", 12", or 14" length for extended bags. Amber LED Plasma Rods™ are ONLY available in the 8" length and are recommended to be used as turn only with rear facing applications.
Plasma Rods™ are a universal hardwire application. Posi-taps™ are included. Consider one of our Wiring Adapters for a more plug and play installation.
8" LED Plasma Rods™ = 60 LEDs Total
10" LED Plasma Rods™ = 80 LEDs Total
12" LED Plasma Rods™ = 100 LEDs Total
14" LED Plasma Rods™ = 120 LEDs Total
U.S. Patents: 6,592,238 6,953,262 7,188,970
Canadian Patent: 2,434,955
Note: This product is designed and intended only for use as auxiliary lighting on motorcycles only. This product is NOT intended to replace any original equipment lighting installed on the motorcycle and should not be used for that purpose. This product must be wired such that it does not interfere with any original equipment lighting.
CA Residents WARNING: This product can expose you to chemicals including lead and lead components, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This product contains recommended 3M™ Adhesive Promoter and must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M™ Adhesive Promoter will be removed from package contents.
Red or Amber LEDs
8", 10", 12" and 14" Lengths Available
Dimensions: 0.3" W x 1.0" D
Single Intensity 2-wire design
48" wire leads
Lifetime LED Warranty
Sold in Pairs
FITMENTWorks on all 12VDC negative ground systems
Models with single function (turn only) rear turn signals can use the following items:
Dual Converters for Run/Turn or Run/Brake Function
SMART Triple Play® for Run/Brake/Turn Function
Eclipze2® Modules for Rear Brake/Turn Function or Front Run/Turn Function
Models with dual function (run, brake, turn) rear turn signals can use Dual Converters to function as run, brake, and turn.