SKU
CD-MICRO-DC
Dual Color Micro Bullet Motorcycle Auxiliary LED Turn Signals
BRIGHT, COMPACT, CUSTOM LED TURN SIGNALS
Measuring smaller than a quarter, these micro bullet turn signals are bright and compact. Quality aluminum bullet shaped housing with sealed acrylic spherical lens maximizes LED light output for a bright spot of light. Housings are offered in a Gloss Black or Chrome finish with 45", 22 AWG wire leads.
Front Amber/White LEDs function as a bright white running light with amber turn signal (preview). Rear Red/Amber LEDs function as a bright red brake light with amber turn signal.
Dual Color Micro Wiring Adapter (sold separately) is typically required to allow the amber turn signal to override the red brake light or white running light when the turn signal is activated providing a visible, full contrast amber turn signal.Only if purchasing the Gloss Black + Amber/White (front) configuration, the wiring adapters are optional for plug and play installation. Units can be hardwired without any additional harnesses if desired.
Caution: This product is designed and intended for use as auxiliary lighting only. It is not DOT compliant or intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interfere with any original equipment lighting.
$69.95
PairWarning: Cancer & Reproductive Harm — www.p65warnings.ca.gov
Details & Fitment
Measuring smaller than a quarter, these micro bullet turn signals are bright and compact. Quality aluminum bullet shaped housing with sealed acrylic spherical lens maximizes LED light output for a bright spot of light. Housings are offered in a Gloss Black or Chrome finish with 45", 22 AWG wire leads.
Front Amber/White LEDs function as a bright white running light with amber turn signal (preview). Rear Red/Amber LEDs function as a bright red brake light with amber turn signal.
Dual Color Micro Wiring Adapter (sold separately) is typically required to allow the amber turn signal to override the red brake light or white running light when the turn signal is activated providing a visible, full contrast amber turn signal. Only if purchasing the Gloss Black + Amber/White (front) configuration, the wiring adapters are optional for plug and play installation. Units can be hardwired without any additional harnesses if desired.
- HD Wiring Adapter fits Front & Rear Dual Color Micro Turn Signals 1996-2017 Harley-Davidson® Softails® (except Breakout, CVO™ Breakout/Pro Street, Rocker/Rocker C, Slim/Slim-S, Blackline or Softail Convertible CVO™), 1999-2003 Sportster Models, 1997-2013 Electra Glide, Ultra Classic, Ultra Limited models (including CVO™), Road King (FLHR), Road King Classic (FLHRC), Road Glide Ultra (FLTRU), Road Glide Ultra CVO™ (FLTRUSE), 1998-2009 Road Glide Standard (FLTR), 2006-2009 Street Glide (FLHX), 2010-2011 Street Glide Trike (FLHXXX) and 2010-2013 Tri Glide® Ultra Classic (FLHTCUTG). Front Amber/White Micro Turn Signals on 1997-2011 Dyna Models and Rear Amber/Red Micro Turn Signals on 1997-2017 Dyna Models (Except FXDB, FXDWG).
- Dyna Wiring Adapter fits Front Amber/White Micro Turn Signals on 2012-2017 Harley-Davidson® Dyna Models.
- Softail Wiring Adapter fits Front Amber/White Micro Turn Signals 2018-2022 Harley-Davidson® Softail Street Bob (FXBB/FXBBS), Heritage Classic (FLHC/FLHCS), Deluxe (FLDE), Fat Boy (FLFB/FLFBS), Fat Bob (FXFB/FXFBS), 2020-2022 Softail Standard (FXST) & Low Rider S (FXLRS), 2022 Low Rider ST (FXLRST), 2018-2020 Low Rider (FXLR) & Breakout (FXSB/FXSR), 2018-2021 Sport Glide (FLSB) & Slim (FLSL) and 2019-2020 FXDR.
- Universal Wiring Adapter can be used on any 12VDC systems with a negative ground.
Micro Turn Signal Mounting Brackets (sold separately) can be used to achieve optimal mounting location.
Single Color Micro LED Turn Signals also available as 2 wire, power (+) and ground (-) hookup; wiring adapter not required.
SMART Signal Stabilizer™ or Load Equalizer may be required when front or rear turn signals are replaced with LED (sold separately).
Caution: This product is designed and intended for use as auxiliary lighting only. It is not DOT compliant or intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interfere with any original equipment lighting.
Installation Instructions
Fitment
Universal, 12-16VDC systems with a negative ground. Dual Color Micro Wiring Adapter (sold separately) is typically required to allow the amber turn signal to turn off the red brake light/white running light providing a visible, full contrast amber turn signal.
Only if purchasing the Gloss Black + Amber/White (front) configuration, the wiring adapters are optional for plug and play installation. Units can be hardwired without any additional harnesses if desired.
Specifications
- ALUMINUM BULLET HOUSINGS
- GLOSS BLACK OR CHROME FINISH
- CLEAR ACRYLIC LENS
- DUAL COLOR LEDS
- DUAL FUNCTION (3 WIRE)
- 12-16 V
- BULLET DIMENSIONS: 0.87" X 0.5"
- STANDOFF: 0.16"
- THREAD: M5-.8
- THREAD LENGTH: 0.25"
- LIFETIME LED WARRANTY
- THIS PRODUCT IS NOT DOT COMPLIANT
- SOLD PAIR
Dig Deeper
Videos
Write Your Own Review