Original MagicFLEX® Wheel Light


Original MagicFLEX® Wheel Lights contain 15 LEDs which illuminate 360 degrees around the outer edge of a round puck to project light on the wheel rim. Mounts to the inside of the front wheel brake caliper where there is a ½” clearance between the wheel and caliper using 3M™ double sided tape that is pre-installed on each Original MagicFLEX® Wheel Light. Each Original MagicFLEX® Wheel Light comes pre-wired with 84” black sheath wire leads, this extra length provides for ease of installation for almost all applications. Available with either a chrome or black case to match the caliper. Dimensions: 2.9” x 2.3” x .4”. Sold Each.

View our Installation Supplies!

In stock

Optional 3M™ Adhesive Promoter must be shipped Best Method or UPS Ground. If alternate shipping method is selected, 3M™ Adhesive Promoter will be removed from package contents.

½” LED Spacing

3528 LEDs  

Dimensions: 2.9” x 2.3” x 0.4”

84” Black Sheath Wire Leads

Lifetime LED Warranty

Sold Each


All Harley-Davidson® Brake Calipers (except: narrow glide front ends (Sportsters®, some Dynas®), and '06 and up V-Rods).

Also Fits Any Metric where the back side of the brake caliper is flat and there is 5/8" clearance between the caliper and wheel.  

Compatible with 12VDC systems with a negative ground.

Instructional, helpful and informative. Here are the videos that relate to this product.

Write Your Own Review
You're reviewing:Original MagicFLEX® Wheel Light
Your Rating
  • Recent Searches
  • GEN-200-KIT-BCM-1156 277
  • Switch Panel Accent For 14-17 Touring & Trike 176
  • lr10 1
  • GEN-KITBCM-2 154