Only %1 left
SKU
PB-TL-INT
ProBEAM® Integrated Low Profile LED Taillights with Auxiliary Turn Signals
PREMIUM LIGHT PIPE DESIGN FOR RUN & BRAKE
ProBEAM® Integrated taillight combines 5 LED running light pipes with full contrast red brake LEDs with built in left and right amber auxiliary turn signals. The low profile design protrudes only two inches from the stock taillight baseplate for a sleek, custom, all-in-one solution for the rear fender. Replacement gasket and nylon washers included for easy plug and play installation into OEM taillight circuit board. Available with a Red or Smoked lens with optional license plate illumination window. All options are DOT/SAE Compliant. Use in conjunction with Custom Dynamics® Magic Strobes™ Brake Light Flasher module to add full contrast brake flash or strobe patterns for even more visibility!
Important: DOT & SAE Compliant run and brake. Integrated turn signals are intended for use as auxiliary lighting only. Integrated turn signals are NOT intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interferewith any original equipment lighting.
As low as
$199.95
EachWarning: Cancer & Reproductive Harm — www.p65warnings.ca.gov
Details & Fitment
ProBEAM® Integrated taillight combines 5 LED running light pipes with full contrast red brake LEDs with built in left and right amber auxiliary turn signals. The low profile design protrudes only two inches from the stock taillight baseplate for a sleek, custom, all-in-one solution for the rear fender. Replacement gasket and nylon washers included for easy plug and play installation into OEM taillight circuit board. Available with a Red or Smoked lens with optional license plate illumination window. All options are DOT/SAE Compliant. Use in conjunction with Custom Dynamics® Magic Strobes™ Brake Light Flasher module to add full contrast brake flash or strobe patterns for even more visibility!
Important: DOT & SAE Compliant run and brake. Integrated turn signals are intended for use as auxiliary lighting only. Integrated turn signals are NOT intended to replace any original equipment lighting installed on the vehicle and should not be used for that purpose. This product must be wired so that it does not interferewith any original equipment lighting.
Installation Instructions
Fitment
1999-2013 Harley-Davidson® Sportster models (Except XL1200N, XL1200X, XL1200V or XL883N); 2014-2022 XL883L & XL1200T, 1999-2017 Dyna models (Except 2009-2017 FXDB, 2010-2017 FXDWG), 1999-2017 Softail models (Except FXS, FLS, FXSB, FXSBSE, FXSTD, FXSTDSE, FLSTN, FLSTNSE, FXCWC, 2010 FLSTSE2), 2018-2022 Heritage Classic (FLHC), Low Rider (FXLR), Low Rider S (FXLRS), 1999-2013 Electra Glide, Ultra Classic, Ultra Limited models (including CVO™), Road King Classic (FLHRC), Road Glide Ultra (FLTRU), Road Glide Ultra CVO™ (FLTRUSE), 1999-2009 Road Glide Standard (FLTR), 2006-2009 Street Glide (FLHX), 1999-2022 Road King (FLHR),2014-2015 Limited CVO™, 2015 Road Glide Ultra CVO™ (FLTRUSE), 2022 Street Glide ST (FLHXST), 2022 Road Glide ST (FLTRXST) and 2019-2022 Electra Glide Standard (FLHT).
Compatible with 1999-Earlier Harley-Davidson Motorcycles when installed with a Taillight Baseplate Replacement for 1999-Earlier Harley-Davidson® motorcycles (sold separately) and Integrated Taillight Wire Harness (sold separately).
Note: Additional wiring adapter required on 2022 Low Rider ST (FXLRST) . 2018-2022 Harley-Davidson® Low Rider (FXLR) and Low Rider S (FXLRS) require Low Rider Integrated Taillight Adapter Harness for proper operation (sold separately).
Not Recommended for inverted installation on 01 FXDWG2, 02 FXDWG3, 99-08 FXDWG, 2008-2013 FXDF, 99-09 FXSTB, 08-11 FLSTSB, 99-10 FXSTC, 99-07 FXST, 99-06 FXSTS, 09-12 XR1200 & XR1200X. Not compatible on Trike models, on models with Run/Brake/Turn module installed or on CanBus models with Brake/Turn BCM programming. Use a ProBEAM® Low Profile LED Taillight for Run and Brake function.
Specifications
- Modern LED Light Pipe Design
- 5 Running Light Pipes
- Full Contrast Brake LEDs
- Auxiliary Amber Turn Signals
- Increased Side Visibility
- Plug & Play Installation
- Optional License Plate Illumination
- SAE & DOT Compliant Run & Brake
- Red or Smoked Lens
- Completely Sealed Unit
- Lifetime LED Warranty
- Replacement for OEM Part 68245-03
- US Patents: D807545, D807546, D808050
China Patent: ZL201730257957.9 - Sold Each
Write Your Own Review