Only %1 left
SKU
PG-WL
ProGLOW™ LED Wheel Lights for Front Wheel Calipers
FRONT WHEEL CALIPER LED PUCKS WITH 360º ILLUMINATION
ProGLOW™ Color Changing Wheel Lights feature ProGLOW™ LEDs in an oval disk to provide 360º coverage. 12 LEDs illuminate around the outer edge of a round puck to project light on the wheel rim. They come pre-taped for mounting to the inside of the front wheel brake caliper where there is 5/8” clearance between the wheel and caliper. Available with either a chrome or black case to match the caliper.
If installing on single caliper front wheel, 24" ProGLOW™ Wire Extensions are recommended (sold separately. For dual caliper applications, add an extra wheel light and 14" 2-way ProGLOW™ Wire Splitters (sold separately).
ProGLOW™ Bluetooth Controller (sold separately) is required for light operation; one controller needed per vehicle.
As low as
$27.95
EachWarning: Cancer & Reproductive Harm — www.p65warnings.ca.gov
Details & Fitment
ProGLOW™ Color Changing Wheel Lights feature ProGLOW™ LEDs in an oval disk to provide 360º coverage. 12 LEDs illuminate around the outer edge of a round puck to project light on the wheel rim. They come pre-taped for mounting to the inside of the front wheel brake caliper where there is 5/8” clearance between the wheel and caliper. Available with either a chrome or black case to match the caliper. If installing on single caliper front wheel, 24" ProGLOW™ Wire Extensions are recommended (sold separately. For dual caliper applications, add an extra wheel light and 14" 2-way wire splitters (sold separately).
ProGLOW™ Wheel Lights come equipped with plug & play watertight IP67 rated connector at the end of a 30" wire lead. ProGLOW™ LED light products easily daisy chain together with additional ProGLOW™ Wire Splitters (for dual caliper) or ProGLOW™ Wire Extensions (for single caliper) to achieve ideal lengths for flawless placement and installation on any 12 VDC vehicle.
ProGLOW™ Bluetooth Controller (sold separately) is required for light operation; one controller needed per vehicle. Do not use with Magical Wizards™ color changing products.
Installation Instructions
Fitment
Compatible with ProGLOW™ Bluetooth Controller (sold separately). Do not use with Magical Wizards™ color changing products.
Mount to the inside of the front wheel brake caliper where there is 5/8” clearance between the wheel and caliper.
Specifications
- 1/2” LED SPACING
- 5050 RGB LEDS
- 120 DEGREE VIEWING ANGLE
- 30" WIRE LEADS
- DIMENSIONS: 2.6" X 2.1" X 0.5"
- WATERTIGHT PLUG AND PLAY CONNECTORS
- PRETAPED FOR MOUNTING
- LIFETIME LED WARRANTY
- SOLD EACH
Dig Deeper
Videos
Write Your Own Review