Quick Disconnect for 2014-Current Harley-Davidson® Motorcycle Tour-Pak

Harley-Davidson® 2014-Current Touring models come equipped with a 6-pin Molex main wire harness connector located under the seat. The factory wires in this connector carry ground, brake, run, left turn, right turn and auxiliary power. Custom Dynamics® offers this quick disconnect as a plug and play wire harness with one end that plugs in-line with the factory 6-pin plugs and a 34” extended wire lead with female connector. This extended lead will mate to the male OEM Harley-Davidson® Tour-Pak wire harness (69200131) to provide power to the factory Tour-Pak lighting with accessible connector for easy removal of the Tour-Pak. 

Additional Quick Disconnect Harnesses available for Tour Pak Speaker Wire Harness & OEM Tour Pak Light Bar Power Harness. 

In the case of adding a “chopped”, “razor”, or aftermarket Tour-Pak that is not equipped with any lighting, this quick disconnect can still be installed under the seat of any 2014-Current Harley-Davidson® Touring model and mate with Custom Dynamics® Power Harness for Add-On Tour Pak to provide easy connections for powering added aftermarket Tour-Pak lighting.

All Tour-Pak Quick Disconnect Installation Information can be found in Custom Dynamics® Tech Help Center.  

Additional Motorcycle Tour® Pak Quick Disconnects available for 2013-Earlier Models.