BTR-1156

Rear Bullet Ringz™ For Harley-Davidson® - 1156

SUPER BRIGHT SUPERIOR PERFORMANCE LEDS

These Rear LED turn signals are OEM replacements with 7 LEDs embedded into an outer aluminum bezel and a cluster of 24 inner LEDs. 1156 pigtail bulb base available in Red or our Dynamic Clusters2™. BCM Compliant. Lifetime Warranty against LED failure. Sold as a Pair.

Red option is plug and play and operates as Turn Signal Only unless Custom Dynamics® SMART Triple Play® Unit or any r/b/t module is installed. The Smart Triple Play Unit will convert the turn signal to function as run/brake/turn with your choice of 10 easy to select flash/strobe patterns.

Dynamic Clusters2™ are multi-color (Amber/Red) LED Clusters used for rear turn signal applications. 1156 pigtail base allows 24 center amber LEDs to function as the turn signal, two additional wires are tapped into a running and brake light power to allow the outer ring of 7 red LEDs to function as a running light & brake light. The Dynamic Clusters2™ (Amber/Red) are NOT compatible with our SMART Triple Play® or any Run/Brake/Turn module. This unit is, however, compatible with our Magic Strobes™ Brake Light Flasher.

Fits Harley-Davidson® models with 1156 single contact bases (models WITH a center taillight) and 1156 single contact bases (turn only). Fits bikes with Bullet style pop-off lens. Uses existing housing base. View Additional Fitments.

Plug & Play rear turn signals on Harley-Davidson® models with Bullet style pop-off lens. Uses existing housing base. 

SMART Signal Stabilizer™/ Load Equalizer is required on 2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models to ensure proper function and flash speed of LED Turn Signals.


In stock
$129.95
Pair

31 5mm LEDS Per Unit


Rear Turn Signals


1156 Pigtail Bulb Base


REPLACES STOCK BULB & LENSES


CHROME OR GLOSS BLACK FINISH


ALUMINUM BEZEL


YOUR CHOICE OF LENS COLOR OVER CENTER LEDS; Amber, Red, Smoked


BCM Compliant


SMART Signal Stabilizer™/ Load Equalizer may be required


Lifetime LED Warranty


Sold as a Pair

FITMENT

Rear turn signals on Harley-Davidson® models with 1156 single contact bases (models WITH a center taillight). Fits bikes with Bullet style pop-off lens. Uses existing housing base. 

Dynamic Clusters2™ require two wires to be routed through the turn signal housing and connected to running light and brake light power. Reference installation instructions below.

2013 & Earlier Sportsters®, 2011 & Earlier Dynas®, 2010 & Earlier Softails®, 2013 & Earlier H-D™ Touring and H-D™ Trikes and all V-Rod® Models require a SMART Signal Stabilizer™/ Load Equalizer to ensure proper function and flash speed of LED Turn Signals.


Dynamic Clusters2™ are NOT compatible with our SMART Triple Play® or any Run/Brake/Turn module.

Related Products

Additional OEM Replacement Bullet Ringz™ including rear options and complete conversion kits.

LED Insert Turn Signals are also an OEM Bullet Style LED upgrade with 48 LEDs that fits into your stock housing just like your stock bulb.

Magic Strobes™ Brake Light Flasher allows riders to easily select from 10 Flash/Strobe patterns by simply spinning a dial.

ADDITIONAL FITMENTS 

H-D™ Flat Ringz
H-D™ Flat Style Inserts 
H-D™ Old Bullet Style Inserts
H-D™ International Models
Yamaha Models
Honda Cruisers 
Kawasaki Models
Indian Models
Chopper

Instructional, helpful and informative. Here are the videos that relate to this product.

Write Your Own Review
You're reviewing:Rear Bullet Ringz™ For Harley-Davidson® - 1156
Your Rating
  • Recent Searches
  • Street glide 51
  • Passing lamp harness 38
  • baseplate 1
  • 2000 ultra clasdic 51